Motorcycles in Edgewood, New Mexico

2007 BMW K1200 GT, K1200GT Fully loaded, every available option including: heated grips, heated seats, BMW-GPS, Elec. Susp. Adj (ESA)., Pilot computer (BC), elect.

We have had this minibike in the family for around a decade or more, and it has been in storage inside a shed or garage for the majority of that time. Since we’ve had it,  we have occasionally started it up and drove it around a little at our family cabin, and my dad has taken it with him on RV trips to scoot around on while camped at RV parks. I’m told (by my uncle and dad) that it’s never been any real trouble to start and run just like it’s supposed to, or had any major mechanical problems since we’ve owned it.

This is a size Medium.The measurements are 21" from armpit to armpit.The arms are 24".The length is 29" and is the back from shoulder to shoulder is about 20".I have found no rips or tears.The jacket has a one button closure and two side pockets(one on each side). On Sep-27-13 at 03:09:16 PDT, seller added the following information: FREE! Sellers: Add a FREE map to your listings.

For sale- one new Burman gearbox type kickstarter rubber Any questions- please ask. Triumph Norton BSA Royal Enfield Matchless Velocette AJS Vincent Panther Sunbeam Bultaco OSSA Montesa Husqvarna Greeves Cotton DOT       FREE! Sellers: Add a FREE map to your listings.

For sale is a Hodaka front brake cable by Barnett.  Per Barnett this should fit all models.  The cable pictured is an illustration and not the actual cable listed for sale.

For sale one new pair of brake/clutch Honda OEM type levers.  These fit a variety of models of Hondas and can be universally used on other brands and models too.  The levers pictured are an example of what you will receive.  See the photos for Honda original equipment applications. Items may be removed from original packaging to facilitate shipping. Any questions- please ask.

For sale is a new set of 9 clutch plates for the Norton 850 Commando.  These plates are made by Barnett and consist of 4 each steel and 5 each friction. If you need plates for an 750 I have those listed as well.

Here for sale is a Magura 314 Duo throttle with Barnett made universal cable.   Per Barnett this combination will work with most 30 - 38mm slide type carburetors.  I personally used this on an ATK 406.  It is the same set up as the other auction listings I have with the universal Gunnar Gasser type throttle except this is has the high quality German made Magura throttle which makes it perfect for using on your Maico, KTM or other bike which originally used Magura as OEM. Any questions- please ask. Combined shipping available upon request.

For sale one new Magura type kill button.  Magura kill buttons were OEM on many European motorcycles such KTM, Maico, CZ etc and this kill button can be used universally on virtually any dirt bike / motorcycle.  It looks 'correct' on vintage bikes. Any questions- please ask.

For sale one new AMAL type aluminum brake for the right side.  This is type which were OEM on Bultaco, OSSA and Montesa.  They also work good on British bikes such as Triumph, BSA, Greeves, DOT, AJS, and Norton.  These can be used on a large variety of motorcycles / dirt bikes and are very popular with vintage mx'ers.  The lever pictured is an example of what you will receive.  If you need a pair of these levers, I have them listed in a separate listing.  I also have the clutch lever listed separately. Items may be removed from original packaging to facilitate shipping. Any questions- please ask.

For sale is a new Bultaco throttle cable by Barnett made in the USA.  This cable replaces Bultao part # 143-15-047A.  Check your parts book to confirm this is the part you need.

For sale- a set of new Triumph battery mounting parts.  Rubber tray 82-8091, strap 82-9005, and angle buckle 83-3849.  Check your parts book to confirm if these are the parts you.

For sale one new pair of brake/clutch Honda OEM type levers.  These fit a variety of models of Hondas and can be universally used on other brands and models too.  The levers pictured are an example of what you will receive.  See the photos for Honda original equipment applications. Items may be removed from original packaging to facilitate shipping. Any questions- please ask.

For sale-  new Triumph oil-in-frame OIF sump gaskets for the frame oil filter.  Part # 83-2829.   This sale is for 2 gaskets which are required.  The pictures are an example of what you will receive since I have several sets.   I believe these will also fit the 1971-72 oil-in-frame BSA models but until I get the opportunity to confirm you should consult your parts book.

For sale is a new OSSA clutch cable for all 5 speed models 1971 and later by Barnett made in the USA.  This cable will not work on the earlier 4 speed models.  It will fit on the following 5 speed models- Pioneer Stiletto, TT Stiletto, 5 speed DMR, Plonker, Mick Andrews Replica MAR, all models of MX / GP Phantom, Super Pioneer, Mountaineer, black Six Days, Desert Phantom, Explorer and 5 speed models I may have missed.

For sale one BSA oil tank mount rubber part # 68-8315.  Check your parts book. Any questions- please ask. Combined shipping available upon request.

For sale- one new Triumph  open end type with-logo kickstart rubber. # 57-2330  common used on both Triumph motorcycles.   Any questions- please ask.

For sale- one new passenger peg / buddy peg rubber Norton # 04-2569 used on the Commando and other models.  Normally these are sold as a pair which I have listed.  Somehow I ended up with just one passenger peg rubber and if you just need one here you are.

For sale-  new Triumph rocker cover gaskets.  Part # 71-1445.   This sale is for 2 gaskets which are used on the the Trident 3 cylinder models.  These may also fit the BSA Rocket 3. Check you parts book to confirm if this is the part you need.

For sale one gasket & o-ring rebuild kit for the AMAL Concentric Mk1 carburetor. The kit comes as pictured.  Also included is both sizes of flange o-ring which were used at different times.

For sale- one new Triumph / BSA egg shape type shift lever rubber. # 57-2450  commonly used on both Triumph and BSA motorcycles.   Any questions- please ask.

For sale one universal clamp on mirror witn 4" stem.  Can be installed on any motorcycle with 7/8" handlebars.  Can be used on either side.  Perfect you want mirror tucked in tight.  If you need a mirror with a longer stem see my other listing for the 8" stem version.  Perfectly suitable for your vintage bike, dual sport, enduro, street bike etc Item may be removed from package to facilitate shipping. Any questions- please ask. Combined shipping available upon request.

For sale- one new Triumph shift lever / centerstand rubber.  Non-logo open end type  commonly used on Triumph and possible BSA motorcycles.   Used on both the shift lever and centerstand.

For sale a new wrench to tighten/loosen Norton twin exhaust collar nuts.  Every have you your Norton's exhaust header come loose.  This is the tool you need to tighten (or loosen) the exhaust nut .

For sale a new Renolds chain 530 (5/8x3/8) size master link.  This is a genuine Renold part.  No chain is included in this auction, just the master link.

For sale a pair of new disc brake pads for the Norton Commando front or rear.  These appear to be semi-metallic.  Part # 06-6186 06-6005 If you have any questions, please ask.

For sale a new Triumph front or rear caliper rebuild seal kit for 1973 and later.  part  # 99-7006 If you have any questions, please ask. Triumph Norton BSA Greeves Vincent Vellocette AJS Matchless Royal Enfield Hesketh Dot Villiers CZ Maico Husqvarana KTM SWM OSSA Bultaco Montesa Sherco Gas Gas TM Beta Yamaha Honda Suzuki Kawasaki Hodaka Bridgestone FREE!

For sale- one set of new peg  rubbers for classic Triumph, these fit a multitude of models.  The rider footpeg rubbers has "Triumph" logo in script and the kickstart rubber has the Triumph logo in script also. Any questions- please ask.

For sale- new old stock BSA / Triumph rear brake pedal stop.  These came from a dealer no longer in business and were in a parts bin with the following part numbers.  41-7008, 82-9958, and  82-9037.

For sale a new Renolds chain 520 (5/8x1/4) size master link.  This is a genuine Renold part.  No chain is included in this auction, just the master link.

For sale- pair new Triumph or BSA passenger/ buddy peg rubbers.  part # 82-9054 These fit multiple models and reportedly were used on Ariel too. Any questions- please ask.

For sale one pair of Doherty grips.  OEM on many British and European street bikes and can be used on any street bike with 7/8" bars.  These look fresh of the mold with release coating still present which is easily removed. Any questions- please ask.

European model (  Long wheelbase ) has spent  early years  in the Netherlands and Portugal . I have  the foreign plates  and documentation. also I have the import papers.