Find or Sell Motorcycles & Scooters in USA
  • 2003 Custom Built Motorcycles Bobber2003 Custom Built Motorcycles Bobber (2003)
    Hello Folks! What you have here is a 2003 Honda Shadow Spirit customized as one "badass midnight bobber". This bike is a beast.
    2016-12-09 04:40:40
    South Lake Tahoe, California, United States
    8
    35000
  • 1991 Custom Built Motorcycles Bobber1991 Custom Built Motorcycles Bobber (1991)
    This build was just completed and road tested.  This started out as a 91 HD FXSTS, everything has been redone to make it a vintage looking bobber.  Have a lot of custom fabrication done to it.
    2016-12-01 04:44:11
    Sun City, California, United States
    0
    26000
  • 2010 Custom Built Motorcycles Bobber2010 Custom Built Motorcycles Bobber (2010)
    DYNO TUNED (WITH DYNO SHEET) ULTIMA EL BRUTO ENGINE I JUST GOT IT OUT OF THE SHOP A FEW DAYS AGO 2500$ WORTH OF WORK DONE IT IS AN ABSOLUTE MONSTER NEW TIRES NEW FORWARD CONTROLS NEW NEW LITHIUM ION BATT AND BATT BOX CARB JUST CLEANED NEW OIL NEW FRONT AND REAR ROTORS NEW CHAIN THIS BIKE HAS NOT EVEN BEEN RIDDEN YET ON THE STREET SINCE BEING BUILT ITS BASICALLY BRAND NEW
    2016-11-03 04:41:37
    San Marcos, California, United States
    10
    34000
  • Harley 48 Custom -Pro BuiltHarley 48 Custom -Pro Built (2010)
     Pro-built custom 48 Bobber
    2013-10-23 00:19:09
    Redondo Beach, California, US
    22,000
    1.00
  • Exile fatbob harley night train twin cam Brand NEW buildExile fatbob harley night train twin cam Brand NEW build (2013)
     Exile fatbob harley night train Real exile bike brand new build using a Harley 2001 Night train. has a Harley title so no issue on registering. Brand new bike has less than 700 miles on it since new build.
    2013-10-23 00:17:12
    Los Angeles, California, US
    8,000
    26,000.00
  • L/RSV SANTEE CUSTOM SOFT TAIL REV TECH DRIVETRAIN 2004 1700 miles $25k PERFECTL/RSV SANTEE CUSTOM SOFT TAIL REV TECH DRIVETRAIN 2004 1700 miles $25k PERFECT (2004)
    CLEAN TITLED 2004 CUSTOM ON A SANTEE FRAME. REV TECH 100 MOTOR. BIKE WAS $25000 NEW IN 2004.
    2013-10-22 00:56:16
    El Dorado, California, US
    1,700
    710.00
  • 2012 Custom Built Motorcycle Bobber2012 Custom Built Motorcycle Bobber (2011)
    One of a kind Special Construction Hardtail Old School Bobber - completed 2011. Have tons more pictures here:https://plus.google.com/photos/110483167355382798606/albums/5815749539318629361 Freddies Frames custom frame and springer front end, one off unique design. Paint by Hellbound Custom, Reno Air Race themed bike, with airspeed indicator for speedo.
    2013-10-19 00:38:30
    Riverside, California, US
    50
    15,995.00
  • custom bobbercustom bobber (2012)
    Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.
    2013-10-20 00:01:43
    North Hollywood, California, US
    500
    3,000.00
  • MMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REARMMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REAR (2013)
        MALIBU MOTORCYCLE WORKS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE  PLEASE CALL ME  818-300-4299 OR E-MAIL ME  FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO JUST FINISHED  MMW HOLESHOT NEW SCHOOL BOBBER   2013 MMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REAR   ,    ROLLING CHASSIS LEFT SIDE DRIVE   ,   , , RIGID ,35 DEGREE RAKE  ,2  INCH BACK BONE STRETCH 0 UP STRETCH, BLACK    FRONT END WITH    18X5.5 , 26 FRONT MOTO MAGS      WHEELS WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BLACK ,POLISHED OR CHROME FINISH .) .  BRAND NEW 200 ,26 FRONT TIRE  , 9 INCH WIDE   REAR FENDER , CAN BE SET UP FOR PASSENGERS, INTERNAL STRUTS , , NEW BEARINGS AND WHEEL SPACERS, SPECIAL MMW CUSTOM   GAS TANK ,,  , MMW   BARS    , RISERS , CHROME KICKSTAND WITH HIDDEN SPRING . OIL TANK , MOUNTAIN BIKE SPRING SEAT  NOTE : SHEET METAL HAS NOT BEEN MOUNTED    THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     .
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    6,600.00
  • WEST COAST CHOPPERS OG 4 UP CFL 200 ROLLING CHASSISWEST COAST CHOPPERS OG 4 UP CFL 200 ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA BACK IN STOCK !!! WEST COAST CHOPPERS CFL !!!!
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    6,500.00
  • Custom chopper/bobber RIGID 100 IN MOTOR 6 SPEED TRANSCustom chopper/bobber RIGID 100 IN MOTOR 6 SPEED TRANS (2007)
    CHASSIS DESIGN COMPANY 100 IN ULTIMA MOTOR 6 SPEED TRANS 200 REAR 21 IN FRONT BIKE IS FAST AND HANDLES REALLY GOOD RUNS GREAT 3 IN BDL BIKE HAS REALLY LOW MILES BEEN GARAGED FOR YEARS  
    2013-10-14 00:04:54
    Riverside, California, US
    3,000
    4,550.00
  • BSA CUSTOM SHOW WINNING BOBBER VINTAGE CHOPPER TRIUMPH NORTON HarleyBSA CUSTOM SHOW WINNING BOBBER VINTAGE CHOPPER TRIUMPH NORTON Harley (1968)
     Here for your viewing is my BEAUTIFUL BSA Chopper!  This is an absolutely stunning custom built motorcycle. The engine built by legend brit bike specialist John York is from a 1968 Thunderbolt completely rebuilt, polished, and tuned to perfection!  The bike project was overseen and assembled with "Master Custom" builder Denny Berg in Southern California! The bike has snagged several awards and trophies at every show the most prestigious being "Best Rigid" honors at the Del Mar Concours!
    2013-10-03 22:34:25
    Atascadero, California, US
    1,500
    5,100.00
  • Lucky 7 Choppers - Custom chopper/bobber - 96 S&SLucky 7 Choppers - Custom chopper/bobber - 96 S&S (2007)
    THIS MOTORCYCLE WAS CUSTOM BUILT BY A PROFESSIONAL BUILDER AT LUCKY 7 CHOPPERS, CA. BEAUTIFUL PAINT JOB, 4K INVESTED! FEEL FREE TO STOP BY AND CHECK IT.
    2013-09-28 01:24:35
    La Jolla, California, US
    3,000
    12,666.00
  • 2012 CUSTOM CHOPPER / BOBBER2012 CUSTOM CHOPPER / BOBBER (2012)
    2012 COMPLETE CUSTOM BOBBER 113 S&S MOTOR MOTOR IS BUILT WITH ALL S&S PARTS. S&S SUPER G CARBURETOR ULTIMA 6 SPEED TRANS ULTIMA IGNITION SYSTEM. THE BIKE WAS JUST COMPLETED IN OCTOBER 2012.
    2013-09-27 13:10:55
    Rancho Cucamonga, California, US
    20
    10,900.00
  • MMW OLD SCHOOL OG 200 BOBBER RIGID ROLLING CHASSISMMW OLD SCHOOL OG 200 BOBBER RIGID ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD  2013 MMW OLD SCHOOL OG 200 TIRE BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X8.5 , 21X2.15   MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2013-09-26 23:59:33
    Thousand Oaks, California, US
    0
    3,600.00
  • MMW SUPER MOTO MAG 26,26 BOARDTRACK RACERMMW SUPER MOTO MAG 26,26 BOARDTRACK RACER (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SUPER MOTO MAGS  26,26     BOARDTRACK RACER   .   2013 MMW  SUPER    BOARDTRACK   26'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .
    2013-09-26 22:20:12
    Thousand Oaks, California, US
    0
    6,500.00
  • MMW TRIKE SOFTAIL CHOPPER , HOT ROD STYLEMMW TRIKE SOFTAIL CHOPPER , HOT ROD STYLE (2013)
        MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO AFTER EVERYONE WAS BEGGING ....WE FINALLY DECIDED TO BUILD SOME TRIKES ...SO HERE YOU GO   2013 MMW  TRIKE HOD ROD STYLE  ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,34 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,2 INCH UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,CHROME 41MM  FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X7 VINTAGE   WHEELS RED POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,21 FRONT RED WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTIBLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:
    2013-09-26 22:11:30
    Thousand Oaks, California, US
    0
    6,500.00
  • MMW 23,23 SCHWINN STYLE BOARDTRACK RACERMMW 23,23 SCHWINN STYLE BOARDTRACK RACER (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA  BACK BY POPULAR DEMAND !!!! SET UP FOR BIG TWIN EVO OR TWIN CAM HARLEY OR AFTERMARKET MOTORS ( WE CAN ALSO MAKE THIS FOR SPORTY/ SOME BUELL ) 2013 SCHWINN STYLE   BOARDTRACK RACER  23 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .
    2013-09-25 22:45:24
    Thousand Oaks, California, US
    0
    4,975.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS EVO , SHOVELHEAD  , PANHEAD MOTORS  2016 MMW OG OLD SCHOOL STOCK TIRE WHITEWALL     RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,LEFT   SIDE DRIVE, ,, ,BARREL OIL TANK  ,SPRINGER    FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16X3.5   ,21X2.15   CHROME   WIRE WHEELS (CHROME ,BLACK , RED AND ORANGE ALSO AVAILABLE).  TIRES  ,  CUSTOM REAR FENDER      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM    STYLE GAS TANK  (SEVERAL TO CHOOSE FROM) ,    CUSTOM  BARS WITH  RISER , WE ALSO HAVE CHROME APES, KICK STAND    NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       .
    2016-06-14 16:00:15
    Thousand Oaks, California, United States
    0
    3,300.00
  • MMW OG OLD SCHOOL STOCK TIRE WHITEWALL BOBBERMMW OG OLD SCHOOL STOCK TIRE WHITEWALL BOBBER (2013)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS EVO , SHOVELHEAD  , PANHEAD MOTORS  2013 MMW OG OLD SCHOOL STOCK TIRE WHITEWALL     RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,LEFT   SIDE DRIVE, ,, ,BARREL OIL TANK  ,SPRINGER    FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16X3.5   ,21X2.15   CHROME   WIRE WHEELS (CHROME ,BLACK , RED AND ORANGE ALSO AVAILABLE).  TIRES  ,  CUSTOM REAR FENDER      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM    STYLE GAS TANK  (SEVERAL TO CHOOSE FROM) ,    CUSTOM  BARS WITH  RISER , WE ALSO HAVE CHROME APES, KICK STAND    NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       .
    2013-09-26 22:20:08
    Thousand Oaks, California, US
    0
    3,300.00
  • 1979 Custom Built Motorcycles Bobber1979 Custom Built Motorcycles Bobber (1979)
    ESTATE DEAL, clear california title,been stored for less than a year,the bike was jump started,added fuel,Fired right up,idle fine,drag exhaust has nice sound,New engine was replaced less than 50 miles,owner was building the bike,needs some minor items for completion,battery may need replacing or completed charging,seat has small rip...needs complete servicing and safety check before highway riding,,,being sold as is.Being sold for much less than has been invested into the bike...International buyers are welcome, we will work with all shippers and can provide shipping quotes 
    2016-07-16 04:54:32
    Yuba City, California, United States
    50
    3,500.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2016 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 150 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .
    2016-07-19 04:50:22
    Thousand Oaks, California, United States
    0
    3,900.00
  • MMW FATSO ROLLING CHASSIS , EXILE STYLE FAT FRONT TIREMMW FATSO ROLLING CHASSIS , EXILE STYLE FAT FRONT TIRE (2013)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2013 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 160 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .
    2013-09-26 22:20:14
    Thousand Oaks, California, US
    0
    3,900.00
  • MMW OG HOTROD FAT TIRE WHITEWALL BOBBER ROLLING CHASSIS ,MMW OG HOTROD FAT TIRE WHITEWALL BOBBER ROLLING CHASSIS , (2013)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA OG HOTROD FAT TIRE BOBBER    2013 MMW OG HOTROD FAT TIRE ROLLING CHASSIS,  BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO , SHOVEL HEAD , PAH HEAD  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  CHROME    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 INCH WHEELS FRONT AND REAR WITH VINTAGE STYLE WHITEWALLS , FAT SPOKE  WHEELS WITH BILLET HUBS AND CHROME    SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).    , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, 1.25 BEACH  BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   .
    2013-09-04 16:13:22
    Thousand Oaks, California, US
    0
    4,000.00
  • MMW OG FAT TIRE BOBBER ROLLING CHASSIS ,MMW OG FAT TIRE BOBBER ROLLING CHASSIS , (2013)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA OG  FAT TIRE BOBBER    2013 MMW OG  FAT TIRE ROLLING CHASSIS,  BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO , SHOVEL HEAD , PAH HEAD  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  CHROME    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 INCH WHEELS FRONT AND REAR WITH VINTAGE STYLE TIRES , FAT SPOKE  WHEELS WITH BILLET HUBS AND CHROME    SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).    , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, 1  BARS  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   .
    2013-09-04 16:13:21
    Thousand Oaks, California, US
    0
    4,000.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
              MALIBU MOTORCYCLE WORKS 818-300-4299 ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 70 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS 1977-2003 SPORTY , OR 1990-2002 BUELL ( NOT BLAST MODELS )  2015  SUPER FUNK   250 SPORTSTER / BUELL BOBBER   RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 40 DEGREE RAKE   ,4  INCH BACK BONE STRETCH, 0 UP STRETCH ,, 250 RIGHT  SIDE DRIVE, ,, , OIL TANK UNDER MOTOR   ,SPRINGER   FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   18X8.5,26X3.5  FAT SPOKES  WHEELS WITH BILLET HUBS    . AVON    FRONT AND REAR TIRE  , REAR FENDER (REAR FENDER SUPPORT ALSO INCLUDED ,)     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,   RAPED APES  BARS,NECK CUPS , RACES , WHEEL SPACERS      NOTE :THE SHEET METAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .
    2016-06-28 04:59:50
    Thousand Oaks, California, United States
    0
    4,800.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW HOT ROD LEAF SPRING , 200 TIRE BOARDTRACK RACER , WHITEWALLS    HOT ROD BOARDTRACK RACER   2015 MMW  HOT ROD  BOARDTRACK  RACER  200 REAR , 21 FRONT  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 36 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  LEAF SPRING      FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)18X5.5 , 21X 2.15 RED WIRE WHEELS    WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2016-06-14 16:00:25
    Thousand Oaks, California, United States
    0
    5,400.00
  • 2024 Custom Built Motorcycles Bobber2024 Custom Built Motorcycles Bobber (2024)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE EMAIL US FOR A QUOTE  WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD ,KNUCKLEHEAD 2024 MMW WISHBONE HOT ROD OG 180 TIRE BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5, 21X 2.15 MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR WHITEWALL    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND, NECK CUPS , RACES  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2024-06-22 09:57:54
    Thousand Oaks, California, United States
    0
    5,500.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SCHWINN STYLE 23,23     BOARDTRACK RACER WITH HOOP  SPRINGER    SCHWINN STYLE    2016 MMW  SCHWINN  STYLE BOARDTRACK   23'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)23X3.75 , 23X3.75 WIRE   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2016-12-17 04:40:57
    Thousand Oaks, California, United States
    0
    5,700.00
  • MMW NEW SCHOOL OG 23 FRONT 200 REAR BOBBER RIGID ROLLING CHASSISMMW NEW SCHOOL OG 23 FRONT 200 REAR BOBBER RIGID ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD ,SPORTSTER AND SOME BUELLS  2013 MMW NEW SCHOOL OG 200 TIRE BOBBER, 23 FRONT     .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,35 DEGREE RAKE   ,2 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  NEW HOOP SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5 , 23X3.5  MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,GIMP  APES BARS ,  , KICK STAND NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2013-09-04 16:13:22
    Thousand Oaks, California, US
    0
    5,900.00
  • MMW 23,23 SUPER SCHWINN STYLE TRACKER WITH WISHBONE SPRINGER AND WHITEWALLSMMW 23,23 SUPER SCHWINN STYLE TRACKER WITH WISHBONE SPRINGER AND WHITEWALLS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA  BACK BY POPULAR DEMAND !!!! SET UP FOR BIG TWIN EVO OR TWIN CAM HARLEY OR AFTERMARKET MOTORS ( WE CAN ALSO MAKE THIS FOR SPORTY/ SOME BUELL ) 2013 SUPER SCHWINN STYLE   TRACKER 23 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    5,900.00
  • 1973 Custom Built Motorcycles Bobber1973 Custom Built Motorcycles Bobber (1973)
    Up for grabs is a 1973 ironhead chopper. Over 8.5K Invested in it.  1973 1000/Bored to 1100 Ironhead motor in a 2003 Harley sportster hard tail frame and a springer front end. This is a bad ass one of a kind bike.
    2016-10-06 04:44:17
    Long Beach, California, United States
    1
    6,300.00
  • MMW 26,26 HEATHEN SUPER BOARDTRACK RACERMMW 26,26 HEATHEN SUPER BOARDTRACK RACER (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW   26,26 HEATHEN SUPER  BOARDTRACK RACER    .   2013  MMW  26,26 SUPER  BOARDTRACK RACER , 26 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .
    2013-09-26 22:44:53
    Thousand Oaks, California, US
    0
    7,000.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
        MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2016 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2016 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:
    2016-10-11 04:45:24
    Thousand Oaks, California, United States
    0
    7,500.00
  • MMW MALIBU CRUISER 23 FRONT , 20 X 200 REAR ROOKE STYLEMMW MALIBU CRUISER 23 FRONT , 20 X 200 REAR ROOKE STYLE (2013)
        MALIBU MOTORCYCLE WORKS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE  PLEASE CALL ME  818-300-4299 OR E-MAIL ME  FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO JUST FINISHED  MMW MALIBU CRUISER  ( ROOKE STYLE )   2013 MMW  MALIBU CRUISER  23 FRONT  ,20X 200 REAR    ,    ROLLING CHASSIS LEFT SIDE DRIVE   ,   , , RIGID ,  ,2  INCH BACK BONE STRETCH , SPECIAL DOWN STRETCH , GIRDER    FRONT END WITH    AIR SHOCK ,20X7  REAR , 23 FRONT NITRO      WHEELS WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BLACK ,POLISHED OR CHROME FINISH .) .  BRAND NEW 200 ,23 FRONT TIRE  , 9 INCH WIDE   REAR FENDER , , , , NEW BEARINGS AND WHEEL SPACERS, SPECIAL MMW HAND MADE  GAS TANK UNDER SEAT  ,,  , MMW   BARS   , RISERS , BILLET  KICKSTAND WITH HIDDEN SPRING, UNDER TRANNY OIL TANK    THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:
    2013-09-05 20:05:12
    Thousand Oaks, California, US
    0
    8,600.00
  • 2012 Harley Rat Rod Bobber2012 Harley Rat Rod Bobber (2012)
     THIS Bobber built for advertisment and promotion af a famous clothing company. " TRUE RELIGION SPRING 2012 - THE REBEL " Check this web site ! http://www.youtube.com/watch?v=kkXdqguDYxU AND IT IS LOUD, FAST, AND FUN TO RIDE.
    2013-09-03 03:57:18
    Gardena, California, US
    500
    8,900.00
  • 2024 Custom Built Motorcycles Bobber2024 Custom Built Motorcycles Bobber (2024)
    MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2024 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2024 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE deposit is non-refundable 
    2024-06-22 09:02:22
    Thousand Oaks, California, United States
    0
    9,500.00
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
     Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.
    2016-06-14 16:00:49
    Petaluma, California, United States
    1
    9,900.00
  • 2024 Custom Built Motorcycles Bobber2024 Custom Built Motorcycles Bobber (2024)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE E-MAIL US FOR A QUOTE  WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD  HOLY GRAIL 26,26 BOARDTRACK RACER 2024 MMW HOLY GRAIL  26,26 BOARDTRACK RACER     .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS . RIGID  ROLLING CHASSIS  SET UP FOR CHAIN    ,MMW SPECED FRAME  ,, LEFT SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   26 INCH   MMW  WHEELS ,YOU CAN  SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR     TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,   ,  RISER,MMW  BARS ,  , KICK STAND,  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2024-06-22 11:57:21
    Thousand Oaks, California, United States
    0
    10,000.00
  • Luck 7 Choppers - Custom chopper/bobber - 96 S&SLuck 7 Choppers - Custom chopper/bobber - 96 S&S (2007)
    THIS MOTORCYCLE WAS CUSTOM BUILT BY A PROFESSIONAL BUILDER AT LUCKY 7 CHOPPERS, CA. BEAUTIFUL PAINT JOB!  FEEL FREE TO STOP BY AND CHECK IT. EVERYTHING WORKS AND RUNS PERFECTLY.
    2013-09-26 23:37:22
    La Jolla, California, US
    3,000
    14,999.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    I'm listing this motorcycle for a friend, and storing/showing in our showroom.  Concord Trailer World -Polaris 1124 Caven Way Concord Concord, CA 94520 and/or Concord Garden Equipment 2451 Monument Blvd Concord, CA 94520 925-682-9777 Call and talk to Kevin or Mike  Originally Featured in Easy Rider Magazine in 2007 as well. If it's not painted or powder coated than it's been nickle or brass plated. Every single piece of this motorcycle was meticulously though after and kept up.
    2016-07-01 04:57:37
    Concord, California, United States
    4
    16,990.00
  • 2012 Bobber bobber Custom 2012 Bobber bobber Custom (2012)
    2012 Bobber bobber, Just built. 113ci S&S motor and much more!
    2013-09-05 07:57:40
    Montclair, CA, US
    0
    18,900.00

Bobber Bobber Price Analytics

Moto blog

Third Annual ‘The MEET’ at ACM

Tue, 26 Aug 2014

More than 2,000 attendees visited America’s Car Museum for its 3rd annual Vintage Motorcycle Festival ‘The MEET’ last weekend in Tacoma, Washington, where over 300 motorcycles and scooters were showcased on the Haub Family Field at LeMay. The event drew pre-1981 motorcycles and scooters from the U.S. and Canada, including an antique motorcycle display, swap meet, cruise-in and a 78-mile roundtrip tour from ACM’s Anderson Plaza to Mt. Rainier.

2014 LA Calendar Motorcycle Show Concourse d’ Elegance Report

Wed, 06 Aug 2014

The 2014 edition of the LA Calendar Motorcycle Show continued its now 23-year tradition as the premier outdoor streetbike event in America with producer photographer Jim Gianatsis moving the show this year to the beautiful green lawns of the Malibu Golf Course among the twisty canyon roads in the Santa Monica Mountains alongside the Pacific Ocean. Highlighting this year’s exciting activities was the emergence of another new and soon to be renown custom bike builder to the sport for which the Calendar Show is known for cultivating. Taking Best of Show in this year’s Calendar Bike Building Championship was Calin Senciac’s Imagine Vehicles International / ImagineVehicles.com motorsports fabrication shop with an incredible custom billet aluminum designed chassis built by Terry Ward and the shop crew, housing a legendary 1979 Honda CBX 1047cc air-cooled in-line 6-cylinder engine.

2014 Lito Sora Electric Motorcycle Entering Production

Thu, 20 Feb 2014

Canadian company Lito Green Motion announced the start of production for its SORA electric motorcycle. Described as a cafe racer with a bobber twist, the Lito SORA claims a top speed of 118 mph and a range of 124 miles in the city and more than 52 miles at highway speeds. Visually, the Lito SORA stands out from other electric motorcycles.

LA Calendar Motorcycle Show Moves To Malibu

Sun, 02 Feb 2014

The 2014 LA Calendar Motorcycle Show continues for its 23rd year with the Calendar Bike Building Championship, Concours d’ Elegance, top celebrity builders, selected vendors and exhibitors, and the Calendar Girl music show. As always, the show will kick off the world premier of next year’s new 2015 FastDates.com Motorcycle PinUp Calendars featuring the world’s top road race and custom motorcycles with the beautiful Calendar Kittens featured in the calendars in attendance at the show. The Calendar Show relocates this year to the beautiful green event lawn of the exclusive Malibu Golf Course, located at 901 Encinal Canyon Road.

Steve McQueen’s Von Dutch Customized Bikes to be Auctioned Tomorrow

Wed, 08 Jan 2014

Here’s an opportunity to own motorcycles associated with Steve McQueen and Von Dutch - need we say more? Get your credit cards out because tomorrow, January 9, 2014, will see a 1923 Indian Big Chief with Princess Sidecar owned by McQueen and fully restored by Von Dutch put on the auction block at the Bonhams Las Vegas Motorcycle Auction. Previously sold at the Steve McQueen Estate Sale in Las Vegas in 1984, the 74cu (1200cc) Indian is “capable of reaching speeds of 90mph.” If McQueen’s coolness factor isn’t enough, having the notoriety of Von Dutch’s restoration is the icing on the cake.

2013 Star Bolt Custom Build-Off – Video

Thu, 24 Oct 2013

Star Motorcycles has done everything a company can to attract attention to the Bolt. Well, everything short of the Oprah-esque trick of telling a crowd to look under their seats for the key to their new bikes. Instead, Star approached a group of 10 customizers that reads like a Who’s Who of the bike modification world, and supplied them with stock Bolts and a deadline.

Öhlins USA Suspension Cirkus of Speed Tomorrow, September 28

Fri, 27 Sep 2013

Rain or shine, the second annual Öhlins USA Cirkus of Speed will take place tomorrow, Saturday, September 28, from 10 a.m. to 3 p.m., in the mountains of Western North Carolina. Did we mention it’s free?

Öhlins USA Cirkus of Speed Is Saturday, September 28

Tue, 27 Aug 2013

Rain or shine, the second annual Öhlins USA Cirkus of Speed is Saturday, September 28, 10:00am to 3:00pm, in the mountains of Western North Carolina. Need reasons to come? First of all it’s free, including “Police Rodeo” star Ben Wolfe, of Lock & Lean, performing precision motorcycle riding.

2013 LA Calendar Motorcycle Show Report

Mon, 22 Jul 2013

The 22nd edition of the annual LA Calendar Motorcycle Show marked its return to the Queen Mary Seawalk Village in Long Beach, California with hometown boy Sam Baldi taking the Bike Building Championship’s Best of Show trophy with a Jimmy Todorovith/Profile Cycles built Big Twin custom named “Lost Angel.” This year’s Calendar Show showcased not only top builders but selected vendors and exhibitors, and of course the Calendar Girl Music live performances. And as always, this year’s show celebrated the world premiere of the 2014 FastDates.com Motorcycle PinUp Calendars, featuring the world’s top SBK World Superbikes, sport and cafe bikes, and custom motorcycles with the beautiful Calendar Kittens. On hand throughout the day to meet with fans and pose for pictures were Calendar Kittens Apple Price, together with official SBK World Superbike grid girls Jessica Harbour and singer/songwriter Sarah Horvath.

Gladstone Motorcycles to Produce Bespoke British Bobbers

Tue, 16 Jul 2013

Television presenter Henry Cole has ridden countless motorcycles as host of the British Travel Channel’s “World’s Greatest Motorcycle Rides” program for 11 series, but he’ll soon be introducing a line of motorcycles of his own with his new Gladstone Motorcycles company. Named for Cole’s great-great-uncle, four-time British Prime Minister William Ewart Gladstone, the new firm will produce limited runs of hand-built bespoke motorcycles. The company’s first model will be the Gladstone No.

2040Motos.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Motos User Agreement and Privacy Policy.

1.027 s, 5361 u