BMW R-Series Motorcycles in Westlake, page #44

Moto blog

Used Review: Arai RX-7 Corsair helmet

This is the lid that saved me from a face full of road and stopped a big bacon slicer (a front disc) from carving a canyon in the top of my head.  This helmet was transformed from gleaming white accessory to scrap when I got back from taking the new BMW S1000RR to Morocco. A pedestrian ran into me from behind a bus and the two of us hit the ground. She’s okay and so am I apart from getting knocked out and breaking my shoulder.

Vespa Matches S1000RR Tablecloth Trick [video]

Never underestimate the little guy. You may remember the video of the BMW S1000RR pulling a tablecloth out from under a meticulously decorated table. Well, a proud Vespa owner attempted a similar trick with his 50cc scoot.

Long Way Round camerman tests ebike in London rush hour

WE'RE MORE USED to seeing him busting a gut on a fully-kitted BMW R1150GS, so testing a silent, non-emission electric motorcycle must have been a weird experience for 'Long Way Round' cameraman Claudio Von Planta. The clip gives a great impression of how a first-generation ebike copes with London's traffic two-up.

AC Schnizter lets rip with BMW S1000RR goodies

GERMAN TUNING house AC Schnitzer has unveiled a gaggle of bolt-on accessories for the BMW S1000RR superbike.The kit comprises of: Stealth silencer, Superbike steering conversion, clutch and brake levers, crashpads, Performance Sports Air Filter, mirror extensions, brake fluid - need we go on. There's even a top yoke mounted bar kit for those that don't want to reach down to the standard bike's low clip-ons.Sounds all fine and dandy if you've a heap of cash to chuck at what's already an expensive machine.Call us boring but isn't a 'standard' one good enough?

S1000RR vs. Goodwood

And before you say it, no it's not "Start and finish a journey on two wheels without falling off." I rode up Goodwood's hill. And I did it on BMW's mighty S1000RR. Ok, so it wasn't infront of thousands of on-lookers and it wasn't at any great speed.

Bridgestone BT-023 tyre tested

Replacing the BT-021, the 023 has a uniform carcass construction but has two different compounds of rubber to alter its performance. The inner rubber is harder for increased life while the rubber on the tyre’s edges is softer for outright grip. On the brief dry sections of our ride the 023 seemed to get up to working temperature rapidly and delivered good dry grip, certainly more than enough for most road riders if you are honest about your riding ability.

BMW Puts New Spin on Old Trick [video]

BMW has gone viral! The German bike maker put together a very cool video showing its new S1000RR sportbike in action and millions of people have already seen it on YouTube. The video in question shows the Beemer attempting the old tablecloth trick.

Puig launch new screen for S1000RR

SPANISH motorcycle accessory expert Puig has launched a new high-performance screen for the BMW S1000RR superbike.The new dome Z-Racing is made from acrylic 3mm plastic, offering good flexibility and high resistance to impacts and scratches, says Puig.The Z-Racing has been tested in a wind tunnel and now gives a claimed 12 per cent aerodynamic improvement over the original screen.The Z-Racing does not require any modification for installation and can be fitted using the original screws.The screen's priced at 68.3 euros (£61) excluding shipping and import duty.You can find more information by visiting Puig.tv

Tested: Metzeler Sportec M5 Interact

With its clever Interact technology Metzeler has created a tyre that has a varying carcass construction to alter how the rubber performs. Without going too deeply the M5 consists of five bands of belting that vary in stiffness. At the outer edges of the tyre the carcass is quite flexible, allowing the rubber to move around and generate more heat and therefore grip, while nearer the tyre’s centre the carcass is stiffer, reducing the rubber’s movement and decreasing its wear.

Hi-Def video of BMW S1000RR on the dyno

THERE'S SOMETHING rather cruel about ringing the nuts out of any bike on a dyno - a bit like poking a lion through the bars of a cage with a long stick... Anyway, not quite sure where I'm going with that one, so here's a rather lovely clip of BMW's much-lauded S1000RR getting a stationary pasting on a dyno. Not sure I'd be standing at the rear, mind you.