Benelli All Motorcycles, page #2

VINTAGE 65CC 1970 BENELLI MINI BIKE  / 70 BENELLI / BENELLI MOTORCYCLE TANK INSIDE NEEDS CLEANED OUT

4x NGK Upgrade Iridium IX Spark Plugs for BENELLI 600cc BN 600 I 14-> #3521 Upgrade Iridium IX NGK Spark plugs for Motorcycles Ultimate Performance Spark Plugs Fine Wire Electrode provides a superior spark concentrated in a small area Precious Metal are used in the tip for its extreme hardness, providing even more durability Improved Acceleration Better Fuel Efficiency Hear resistance for the extreme heats generated with high performance engines Anti-Corrosion Anti-Seizing plating on the metal surfaces Upgraded Plugs will give better Ignition, leading to easier starting, cleaner burning, and better performance New Spark Plugs are usually a direct fitting item and a simple service item for your engine Please follow the manufacturers handbook for full details Application Details MAKE CAPACITY MODELS YEARS BENELLI 600cc BN 600 I 2014 Onwards Notes:  Spark Plug Details Part No: CR9EIX Stock No: 3521 Qty: 4 Range: Iridium IX These Spark Plugs are the recommended upgrade for the Motorcycle Listed  Please visit www.ngkpartfinder.co.uk if you need to confirm application information. We supply only brand new, 100% Genuine, Boxed, NGK Spark Plugs  UK Seller, items here in stock .. Ready to go out today Picture is an accurate example, but the actual item may vary.

This is a Dellorto UA 18 S carb of off a Ducati Cadet two stroke single. The slide is stuck but should come apart after a much needed cleaning. Buy it now price includes free shipping.

Description: VETTA ELECTRICAL HANDLEBAR SWITCH Condition: GOOD, IT APPEARS THAT WAS NEVER USED Shipping and handling: I will combine shipping for multiple items when it's possible to package them together International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

New Old Stock - 3 piece complete Benelli Kickstart Crank for 125-250cc. Includes pedal, bolt and crank. Items have been sitting on the shelf for years, but the chrome looks great!

Superbikes of the 1970s This first class set includes 13 collectors cards / mini art prints in unissued condition (wrapped in cellophane). Benelli 750 SEI BMW R90/S Ducati 750 Sport Honda CB750 Kawasaki 750 H2 Laverda Jota 1000 Moto Guzzi 750S MV Agusta 750S America Norton Commando 850 Suzuki GS750 Triumph Trident T150 Yamaha XS750 Title Card Printed on first class card stock, these limited edition collectors cards are perfect for picture framing and collecting. They would make an ideal gift for friends and family.

Error: Embedded data could not be displayed. Regulator Rectifier Brand New / In Stock The rectifier and regulator changes the AC voltage generated in the generator in the used in the electrical system supply voltage of 12V and holds the voltage within a certain tolerance range. Thus, the battery is charged and ensured that, for example, light bulbs not blowing.

One pair of beautiful Shotgun themed cufflinks. Hand crafted and presented in a stunning velvet gift bag. The shells are cleaned and polished then backed onto vintage styled cufflinks.

  FITS BENELLI 500 LS DUAL  LEATHER SEAT COVER ONLY You are bidding on a new custom made top quality seat cover made from 100% real leather This item is 100% real strong leather suitable for all weather conditions with top quality stitching (For more colours please check our ebay shop) please note to fit this leather skin cover you need to staple or glue it over your original cover by using a simple staple gun Buy with confidence . .

You are purchasing a Samco Coolant Hose kit for the following Motorbike: BEN-1 Benelli TNT 899 / 1130 All Years Samco Silicon Rad Hoses ( Contains 8 Hoses - usually Stocked in Blue ) This kit is available in other colours as shown below:   Standard Colour : Blue Colour Options : Red / Bright Green / Yellow / Purple / Black / Orange / British Racing Green Premium Colour Options : Ice White / Metallic Silver /Pink & Classic Black (Available in alternative adverts) : Samco Blaze / Urban Camo / Electric Blue Camo / Solar Orange Camo / Viper Red / Gun Metal  (Available in alternative adverts)  Standard Colour Options are at the advertised  price, for the premium colour options shown please see Alternative adverts , please advise at the time of payment which colour is required , if not advised we will send what is available. We can also supply a Stainless Steel Hose Clip Kit with your purchase , please see our separate advert for Kits & Hose Clips We also supply Clips Kits individually,  they are numbered CK-(Bike Kit No) , i.e. CK-KTM-40 ( as shown in the relevant advert.) PLEASE NOTE HANDLING TIMES SHOWN ARE FOR THE STOCKED COLOUR ONLY, ANY OTHER CHOICES ARE SPECIAL ORDER ITEMS NORMALLY Please note Samco lead times, we endeavour to supply the stocked kit upon payment however occasionally  we will be awaiting stocks, if urgent please enquire prior to purchase to avoid any disappointment , special order kits not available will have to be ordered, this takes approx 4-5 weeks which is standard for any Samco supplier, please be advised of this prior to purchase.

missmonkeyclaw Store   We buy vintage motorcycles, parts and collections! Up for sale is the rotor off a 1961 wards riverside benelli 50cc good clean shape . Please see pictures for additional details.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description Few spots of light corrosion Throttle grip has a small cut Part number M91-M91-A   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

Benelli Velvet 125 2008 Rear Light Lens Good condition Parts came from an MOT'd bike we took in part exchange against a new bike. Clear on HPi but not suitable to be retailed in our show room so it was broken down for parts. (it is your responsibility to purchase the correct item using the picture supplied, if unsure ask us)!

Very crusty will need to be cleaned and lined. Does have pinholes. Petcocks are there.

From a 2005 Tornedo Tre - an undamaged bike - In very good condition - no damage of any kind.  I have been specialising in Italian bikes for a few years now. Please click on the link for my Ebay Shop to view my comprehensive selection of parts. I have the largest stocks of used Benelli Spares to be found on ebay.

We buy vintage and project motorcycles, parts and collections! FOR SALE:  headlight           Part Came From: 1974 benelli tornado.  may fit other makes and models.  please check with your local dealer. Condition/Description: light is in good shape overall.  working.  includes rubber trim ring.  some corrosion on outside of headlight.  trim has some indents.                       Please see pictures for details of the condition. Email if you have additional questions.      My Inventory Number: S582 CHECK OUT OUR FACEBOOK PAGE!!!

Home About Us Terms Shipping Contact Us FAQs QUICK FIND PARTS MOTORBIKES   2002 BENELLI NAKED 50 (2000-2005) Switch Gear / Rear Brake Left Hand ITEM DESCRIPTION Here we have for sale:   2002 BENELLI NAKED 50 (2000-2005) Switch Gear / Rear Brake Left Hand   Please check pictures to confirm condition as this is a used part   2002 BENELLI NAKED 50 (2000-2005) Switch Gear Left Hand (Switch Gear Left Hand) Switch gear/rear brake lever. (Please have your eBay item number ready as a reference number for our sales team)   Please note; postage costs are for UK MAINLAND only   For Scottish Highlands, Highlands and Islands of Scotland, Ireland, IOM and overseas please contact us for a quote   Once bought please email with your contact phone number for delivery purposes All parts are stamped & removal of the marks will invalidate your warranty. Please inspect all goods before signing to ensure the item has not been damaged in transit.

 Nice looking original pair of 70's era Benelli 250 2C muffler tips with mounting rings. There is also pair of baffles (one side missing a part). Muffler tips look good, not rotted out.

BENELLI X 49 49 X Left REAR INDICATOR 58 Reg OPENING HOURS MONDAY TUESDAY THURSDAY 9-5 FRIDAY 9-1pm  CLOSED WEDNESDAYS SATURDAY AND SUNDAY  NO COLLECTIONS ON THESE DAYS  PLEASE TELEPHONE 01663 743720 WITH ANY QUESTIONS DISCOUNT FOR PHONE ORDERS CREDIT AND DEBIT CARDS ACCEPTED ITEMS WILL BE DESPATCHED THE SAME DAY IF ORDERED BEFORE 1PM ON  MONDAY TUESDAY THURSDAY AND FRIDAY.  RETURNS ACCEPTED ALL RETURN POSTAGE COSTS TO BE PAID BY THE BUYER POSITIVE FEEDBACK IS LEFT FOR BUYERS AUTOMATICALLY BY EBAY SYSTEM AFTER I RECEIVE A POSITIVE  ALL PARTS COME WITH 30 DAYS WARRANTY PLEASE READ OUR FULL TERMS AND CONDITIONS FOR ANY OTHER INFORMATION REQUIRED Helpful information:-It is a well known fact that in the motor industry it can be difficult to purchase the correct part due to changes (for example upgrades or face lifts) on a Vehicle though out it's length of production, the only way you can be sure of receiving the correct part is to match up the picture and part number making sure that they are the same... (the part number can be found on the part you are replacing). If you are still not sure after doing the above please speak to your Mechanic for advice, by doing the above can save a lot of time, money and frustration.

   NOS KONI 12 1/2" Shocks     These shocks have been serviced, as all early KONIs even NOS have the flaw of the disintegrated and melted rebound-top out plastic washer. This melted crud has been thoroughly cleaned out, as explained below. Once done it will not happen again so these are set for life. Consider this when buying new or used KONIs.   Springs and mounts are used, the chrome is very nice but not perfect.

missmonkeyclaw Store Up for sale is the cable jackets off a 1961 wards benelli 50cc supersport good jackets inside cabels shot      The parts that I sell are off used bikes in used condition unless otherwise specified. I try to describe the parts as best I can and try to answer all questions to the best of my knowledge. These are used parts and most show standard wear and tear for the age of the bikes that they came off of.

*Priority Mail is quoted but FedEx is also available as an alternative shipping method and may be cheaper depending on your location. Please click "see details" after the shipping quote to see all available shipping options. Up for auction is:Vtg Wards Benelli Riverside Fireball 450ss 50 cc Forks Triple Tree Steering Stem.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description Good condition   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

We buy vintage and project motorcycles, parts and collections! Part Came From: 1967 wards 250.  may fit other makes and models.  please check with your local dealer. Condition/Description:   in ok / poor shape.  some wires missing ends.                     Please see pictures for details of the condition. Email if you have additional questions.      My Inventory Number: S650 CHECK OUT OUR FACEBOOK PAGE!!!

Beautiful New Old Stock BENELLI Engine Side Cover. Part number G-567. I believe for 50 or 65cc engines.

Brand New Upside Down Front Fork Covers in a superb Carbon Fibre finish. Cream Carbon Universal Upside Down Front Fork Protectors - 160mm length Designed to protect the upper fork stanchion and oil seal of all Upside Down (USD), front motorcycle forks. The soft alloys used in the production of motorcycle fork stanchions are easily damaged or marked through everyday use of the bike.

As used on many Italian machines of the '70s.  This version is chrome, bare body without reflectors, the earliest style.  Guzzi part number would be 1775-1652.

 CCS MOTORCYCLE SPARES, 07969507768,01159441666.  BENELLI K2 50cc 2002 , OFFERED HERE IS THE RIGHT SIDE SWITCH GEAR , PEG MISSING WAS HELD ON BY A SCREW VGC, NO CRACKS. SAME DAY SHIPPING 3-5 DAYS DEL`

Tool Box Knobs for Benelli Wards Motorcycles and Dynamo mini bikes. May fit bikes too. Thread Size  6mm x 1.25 New Old Stock  ORIGINAL BENELLI PARTS

NOS CEV Speedometer Drive.  Made in Italy.  The drive is for a 15mm axle.  Cable spins approx. 1 7/8 revolutions for 1 turn of the wheel. All Illinois sales will include sales tax.  Please contact us with any questions.

This is a NOS intake spacer fits benelli enduro 175cc maybe  others.  please check your parts books.Thanks

This is a NOS  stud fits benelli enduro 175cc  maybe  others.  please check your parts books.Thanks

Up for sale is a NEW OLD STOCK Air Filter for Dellorto Carbs.  I believe this fits Wards Riverside and Benelli Mini Bikes and other small motorcycles.  There are two part numbers, DE 4070/A and 58030694.  The internal diameter of the inlet where it mounts is 27mm.  This part is in excellent shape.  Includes a needle jet.  A VERY RARE part!! Please check out my other items for more RARE Honda and Yamaha NOS parts. Please ask any questions you may have before bidding.

missmonkeyclaw Store Up for sale is the levers off a 1961 wards benelli 50cc supersport straight shape good working order      The parts that I sell are off used bikes in used condition unless otherwise specified. I try to describe the parts as best I can and try to answer all questions to the best of my knowledge. These are used parts and most show standard wear and tear for the age of the bikes that they came off of.

This is a NOS Oil Seal fits benelli endure 175cc  maybe  others.  please check your parts books.Thanks

Brand new, never been on a machine.  The iconic donkey dick (sorry) grips of the seventies.  Condition is perfect, the listing is for one pair-clutch side/throttle side.  They are suitable for 7/8" handlebars. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:20:10 PST, seller added the following information: Buyers please note:  If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice.  Ebay's shipping calculator is terrible and I ALWAYS combine shipping when possible for the cheapest cost to you.

Here is a nice 1971 Benelli Hurricane Mini Bike 2-stroke 65cc.  It is not currently running but does kick over and sounds like it has great compression.  the metal tag says 4-1971 with serial 634364 on tag. This bike will shine up very nice.  If your looking for a nice original to restore this would be the one to do it or just try and keep it original.

Gas tank for Benelli/Wards Riverside 125 and 175.  Made in Italy long long ago.  Not perfect but a good starting point for a custom.  Includes petcocks and a couple of hold downs.  And a beat up 2 stroke gas cap that doubles as an oil measuring cup.

Italian made Fuel Valve for bikes with 16 X 1.0mm Male threads on there Gas Tanks. This freshly made Fuel Valve has a 8mm hose fitting and angles in at 90 Degrees. The Fuel Valve has Three positions ON/OFF/RES and the lever is black plastic.

Engine kit all benelli wards riverside 250 350 260 360THIS KITS IS ALL SOCKET ALLEN - perfect for ease of use! We only use a-2 and a-4 grade stainless!! These are hand polished stainless fasteners.

Very used very vintage rear fender for Benelli Wards Riverside 125 and 175 bikes.  Real Italian steel, not concours or anything but perfect for putting on a scrambler or hacking up on a bobber or cafe racer or whatever.

Benelli Quattro parts bike, 500 cc. NO TITLE, not sure of exact year. Sold as parts only, what is pictured is being sold.

4 gear tranny internals with the kickstarter plate, fork and swiwel. One end of the gear shaft has bashed in threads. Could be restored as the shaft is straight and true.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description Slide moves freely Float bowl is clean Air filter is type F8/9   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

FREE EXPEDITED SHIPPING - USPS PRIORITY MAIL - FAST, INSURED, with TRACKING Exhaust Hanger and Muffler Clamp - New Old Stock - to fit Wards Riverside Mojave 260 - 360 with low (road style) exhaust.  May fit other Benelli motorcycles or any motorcycle.  These parts are from a Product Improvement Kit and are genuine original manufacture. The chrome plated exhaust hanger is about 13-1/4" from hole center to center.  Holes are 5/16" or 8mm. One mount end is angled, the other is straight.

This Horn is off a 1966 Benelli Fireball 50cc Motorbike distributed by Montgomery Wards Riverside.  Please see the pictures below and contact me with any questions. Items ship within 2 days of receiving payment.

This is for one NOS Benelli Throttle Cable for the 125 Cobra. Will fit others also. S/H will be $5.00 to any of the 48 states.

This harness is off a Benelli Hurricane 65 that I had used for parts.  This has most of the lever actuated brake switch parts which are tough to find, the main harness and also the Brake light harness.  Wires all look pretty good and pliable, the grey casing is dry and cracking though.

NOS Alloy rear fender for Benelli or Wards Riverside 125 and 175 bikes.  Test fitted but never ridden.  Some light shelf wear from storage.   Factory drilled holes for mounting, taillight, and license plate.  There is a small dent that is some artifact of manufacturing because all of these fenders have the same dent. Awesome piece for restoration or customizing.  May fit other bikes if you're creative.  Cafe racer, bobber, use your imagination.