-
2003 Custom Built Motorcycles Chopper (2003)
For sale is my 03 Springer Softail build.When I purchased the bike, the odo read 4 miles on the motor build.The previous owner did most of the body fab. After I took possession, I changed out the bars and cables, put new grips and pegs on, relocated the bar controls to other areas, swapped in a Mikuni 42mm carb, serviced the entire bike (gaskets, brakes, fluids, etc) and swapped out the fuel tank.This is titled RECO in the state of Minnesota for the custom build. I no longer ride this bike and it deserves to be ridden. The motor is a 96ci S&S build.2016-10-31 04:39:58Hopkins, Minnesota, United States216000 -
2008 Custom Built Motorcycles Chopper (2008)
2008 American Thunder Prostreet Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * *Top Line Information Year: 2008 VIN: 1D9SS64D28H251015 Make: American Thunder Stock: MSN3792 Model/Trim: Prostreet Condition: Pre-Owned Engine: 1638 cc Exterior: Black Transmission: manual Mileage: 14,200 VideoDescription This 2008 American Thunder custom Pro Street is in excellent condition with 14,200 miles on it. This low and long black and chrome beauty shows no signs that it has ever been laid down with two little imperfections found on it. There is a rub mark on the front brake lever and a small scratch on the front fender, where it looks like something was dropped on it.2016-10-20 04:39:21Eden Prairie, Minnesota, United States148,977.00 -
2015 Custom Built Motorcycles Chopper (2015)
This is a fresh built bobber with only about 150 miles on it , the mile are going up as we are driving it , 2015 chassis design frame and springer front , titled and built in 2016 , 113 ultima 6 speed ultima 2" ol school belt 23" fat spoke wheels Sprotor on rear House of kolor jet black with silver flake and red striping The bike runs , rides ,drives excellent Everything thing is new and very nicely done Check out the video http://youtu.be/7Tcyr8UuNLA Rivertownupholstery . Com2016-08-03 04:53:56Stillwater, Minnesota, United States15018,500.00 -
2003 Custom Built Motorcycles Chopper (2003)
Up for Auction is my beautiful eye catcher one of a kind 2003 Red Horse Custom Chopper Motorcycle It has a intense S&S 113CI Motor with 4400 miles on it this beautiful machine has a 6-speed transmission for a smooth ride it has a softtail chassis it also comes with a removable passenger pillion. This bike has the Dakota digital gages it has been professionally maintained and well taken care of. If you would like to see it in let's feel free to contact us we would gladly show it.2016-07-18 04:53:19Brainerd, Minnesota, United States414,000.00 -
2000 Custom Built Motorcycles Chopper (2000)
Professionally built by Donnie Smith. Stretched & Raked, 250 tire, Danny Gray Seat. Every nut, bolt and washer is chrome.2016-07-03 04:55:23Burnsville, Minnesota, United States1814,500.00 -
1982 Custom Built Motorcycles Chopper (1982)
this is a suzuki 1100 bore 3.5 mm over stock wiseco 10.5 to1 compretion 8 valve 3 angle job newer clutch kit new mirror rebuilt carbs frame is costum built the guy who built it is a dirt car chassi biulder. works for dirt duelers and is a cop he did the gas tank and the fender was done on a inglish wheel .the paint is house or colors I still have 500.00 in paint the bike needs a bike builders title all works perfect the resone im selling may have to have back surgery iv given up riding motorcycles and off road sport machines the only thing ive been doing for work is oil and tire jobs in the shop i love do not wast my time with junk offers THIS BIKE RIPS I HAVE DONE A 3 GEAR START BURN OUT NOWONE HOLDING THE FRONT TIRE WHILE SEATING ON THE BIKE the tank needs to be repianted a tree branch from are yard landed on it 507 313 8340 ther is no title2016-06-14 15:24:52Minnesota City, Minnesota, United States02,500.00 -
2003 Custom Built Motorcycles Chopper (2003)
2003 iron works rage st.has rev tech 100 motor was bored 30 over last spring rev tech polished 6 speed tranny,legend air ride suspension,had new alto clutch last summer,bike has a 42 deg rake 6 degree tree 8 up o a 2 inch down tube and a 5 outback bone.hydrolic clutch,rear tire is a Avon av72 cobra size 250/40 18 front is Avon also size mh 90-21.has a custom paint bike is very nice ride always gets looks no matter where it is2016-06-14 15:21:27Monticello, Minnesota, United States2017000 -
2005 Custom Built Motorcycles Chopper (2005)
2005 Red Horse "Mustang 250" - only 3,380 miles - LOW RESERVE - bid to win !! this bike is turn key ready - freshly tuned and detailed! Features: -100ci RevTech engine-Mikuni HSR45 carbuerator-Thunderheart electronics-Samson performance pipes-Avon Venom Tires - 250 rear -Progressive rear suspension -Dakota digital speedo & tach-billet and chrome controls As you will notice in the photos below, this bike has been impeccably cared for. In between rides, it was used for showroom display - always detailed and polished to impress. Red Horse Motorworks is a NADA recognized manufacturer , and was a premier builder of exotic choppers from 1999-2007 .This bike originally sold for $27,395!2016-06-14 15:19:15Buffalo, Minnesota, United States342000 -
Extreme Mini Chopper (2005)
One of a kind EXTREME MINI CHOPPER Completely hand-build and hand-machined Tecumseh Engine Automatic Transmission Electric Start Mag Wheels Blinkers TOP SPEED 50 MPH!!! This is a super fun little chopper! Seat height 14" Fork tube length 32" Check us out at www.indiantwincities.com *** Thinking about purchasing a new 2014 Indian Motorcycle?2013-10-22 00:53:30Saint Paul, Minnesota, US0760.00 -
Rooke style bobber , chopper , bar hopper (2012)
Custom bobber Chassis design co. frame and front end 113 Midwest ultima engine Midwest ultima 6 speed transOl school 2" belt drive w / hydraulic clutch250 rear tire BMW laser blue Bike runs n rides very good , 800 miles is an estimate , a definite attention grabber always draws a crowd , http://m.youtube.com/watch?v=qKnlc85CVFs2013-09-27 11:09:32Stillwater, Minnesota, US80012,000.00 -
2004 santee chopper (2004)
2004 chopper 100 cu rev tech 6 speed trans,lots of jessie james parts has less then 900 miles needs a good cleaning a mush see 3 inch belt drive cash only at pick up you can call me at 763--286--4141 is for sale in home town2013-09-26 23:16:47Buffalo, Minnesota, US9005,100.00 -
Custom Chopper GORGEOUS, LOUD, FAST, Head Turner!!!!!!!!!!!! (2002)
Up for sale is my beautiful custom chopper. This bike is a Rolling Thunder soft tail chassis. It is fully loaded and runs PERFECT AND STRONG!!!2013-10-22 00:38:43Lindstrom, Minnesota, US9,000500.00 -
Custom Chopper -- Paughco/Harley Davidson (2002)
Custom Chopper made by Blackstone Custom Motorcycles, Duluth, MN. Paughco FramePaughco Springer Front EndHarley Motor, 80 cubic inch, 1340ccHarley TransmissionSamson Outlaw PipesHarley Rims & TiresCigarette LighterArlen Ness Side Mirror (Left Side)Many more custom parts, see pictures2013-09-05 08:42:31Duluth, Minnesota, US3,0003,000.00 -
Custom mini chopper- mini bike- minibike- show bike (2005)
Made in USA by CMB custom mini chopper with polished front fork, polished solid rear wheel with Avon tire, polished custom billet 16" front wheel. Powered by a 195cc 6hp electric start tecumseh engine with chromed custom pipe. Has a comet tav 30 belt drive with polished cover. Gas tank started as a big chopper tank and was narrowed 3" to fit the bike. Has working headlight and led tail light. Welds on the frame were smoothed and molded, wires and cables were run through the frame when possible. Disc brake on the rear. Painted with Duplicolor spray can, cleared and buffed- looks nice. top speed approx 40-45 mph, total length approx 7', seat height 17", total weight approx 175lbs.---made for an average sized adult. Does NOT have a title. Please ask any questions before bidding. Must be picked up.2013-09-03 21:41:02Foley, Minnesota, US5250.00 -
Custom Steed Thoroughbred 2005 (2005)
2005/06 CUSTOM CHOPPER STEED THOROUGHBRED 300-CM WITH 124 CU IN S&S MOTOR. ONLY 5 STEEDS IN THE WHOLE MIDWEST. 7400 miles MADE IN SCOTTSDALE, AZ BAKER 6 SPEED LED HEADS UP INSTRUMENTS(ALL IN MIRRORS) MONO SHOCK FRAME 2 SEATS SINGLE AND DOUBLE TO TAKE THE LADY.2013-09-03 17:25:54Osseo, Minnesota, US7,48917,595.00
Victory Kingpin Tour Price Analytics
Moto blog
The most powerful Victory
Tue, 23 Feb 2016Victory, as promised, has introduced the most powerful model in the line of cruisers called Octane. Despite expectations, the bike is practically no different from the previously presented Combustion. At Victory, the novelty is called the modern muscle bike.
Victory has set a release date for Octane
Fri, 08 Jan 2016The new bike, called the Octane, will feature a 1,200cc liquid-cooled powerplant based on the Indian Scout engine. According to the bold statements of the brand representatives, we are waiting for a motorcycle from the Ducati Diavel league.
Concept Victory Combustion
Sat, 05 Dec 2015At the New York International Motorcycle Show, Victory unveiled a cruiser powered by the acclaimed Project 156. Like the Ignition concept shown in Milan, the bike is driven by a 60-degree 1200cc V-twin, with a belt-driven final drive.
Victory presented Project 156
Sun, 07 Jun 2015Victory has teamed up with Roland Sands Design to completely declassify the Project 156, a hand-built race bike for the annual Pikes Peak International Hill Climb. The motorcycle is equipped with a liquid-cooled V-twin, powered by two 67-mm “chokes”, which are supplied with air through an air intake located in a false tank. The fuel tank is located under the engine.
Webb Wins Salt Lake City EnduroCross
Mon, 13 Oct 2014From an EnduroCross press release: Factory Beta and Stillwell Performance-backed Cody Webb took a decisive win tonight in Salt Lake City’s inaugural AMA GEICO EnduroCross event. The win was Webb’s second after taking the first round victory in Las Vegas and puts him and his Beta two-stroke 300 into the points lead. The race fans in attendance at the Energy Solutions Arena saw a night go almost perfectly for GEICO-supported Webb.
Polaris Slingshot Production Begins
Fri, 10 Oct 2014Polaris has begun full production of its new Slingshot three-wheeler at the company’s manufacturing facility in Spirit Lake, Iowa. 2015 Polaris Slingshot Review – First Ride/Drive + Video “We continue to introduce new, innovative products and technologies that create opportunities for growth here and around the world. Today, we are excited to celebrate the revolutionary 3-wheel, Polaris Slingshot into full production here in Spirit Lake,” says Bennett Morgan, President and Chief Operating Officer of Polaris.
Photos Of This Weekend’s Denver Endurocross Track
Fri, 03 Oct 2014This weekend the EnduroCross championship makes its way to Denver and the National Events Center for the fifth round of the nine-round series. Truckloads of dirt, mountains of rock and piles of logs are coming together to create an EnduroCross course that’s sure to challenge racers and entertain fans. Excitement will be a mile-high this weekend as the EnduroCross Championship puts three different race winners into an epic battle for valuable points before the halfway point in the series. Beta/GEICO-backed Cody Webb has led since his first round victory in Las Vegas, but KTM’s five-time champion Taddy Blazusiak is hot on his heels after a big win at the last round in Atlanta and at X-Games. And don’t count out Colton Haaker.
Josh Hayes Wins Fourth AMA Superbike Title
Thu, 18 Sep 2014Say what you will about the depleted state of the American roadracing scene, it shouldn’t diminish the fact Hayes put in the effort and beat some formidable challengers to the title. Here, the AMA congratulates Josh Hayes on his accomplishment. Monster Energy Graves Yamaha’s Josh Hayes entered the 2013 AMA Pro SuperBike season on the heels of the most dominant campaign in the history of the series and with his primary threat no longer in the paddock.
NHTSA Launches Recall Look-up by VIN Tool
Fri, 22 Aug 2014The U.S. Department of Transportation and the National Highway Traffic Safety Administration have launched a new free online tool that should make it easier for consumers to inspect their vehicles’ safety recall histories. The new search tool, available at http://www.safercar.gov/vinlookup, allows people to look for recall campaigns by entering Vehicle Identification Numbers.
Drag Specialties Releases New Harley FXS/FLS and Victory Hammer Seats
Thu, 14 Aug 2014Drag Specialties, long known for its quality aftermarket parts, has released new seats for two different American motorcycle manufacturers. Harley-Davidson FXS/FLS models now have stylish Predator Seats available for their bike. The solar-reflective leather on the seat surface is claimed to reduce the surface temperature of a sun-baked seat by “as much as 25 degrees.” The sides are constructed of automotive-grade vinyl.