Bxc Hidden Magnet For Cadence Sensor Campagnolo Vento Neutron Hyperon Ultra on 2040-motos

Hidden magnet for cadence sensor

ADHESIVE TAPES, SCOTCH TAPE AND GLUES ON YOUR CRANKS? NEVER AGAIN!

The innovative magnet is installed directly on the pedal axle on the rear of the crank using its powerful magnetic attraction to stay firmly anchored. This solution permit to preserve the aesthetics of your crank. The strong force of attraction, equal to about 2kg, allows the same to remain firmly and resist to every condition of use: even the pressure washer jet!

BENEFITS:

The BXC MAGNET solves many problems associated with the use of cadence sensor.

+  It improves aerodynamics and the look of crank. It magnetically attaches behind the axis of pedal and so clamps, glues and tape which ruin the aesthetics of the crank are not necessary.

+  Extremely accurate reading of cadence signal. Thanks to a powerful magnetic force, it is possible to increase the distance between the magnet and cadence sensor up to 20-30 mm (about 1 inch) allowing a better positioning of cadence sensor. You will never have the need to get off the bike for adjusting the distance between cadence sensor and the magnet because it works at every distance!

+  It is impossible to lose it on the road!!! but easily removable… The powerful magnetic force that binds him to the axis of pedal allows it to resist to every condition of use on the road and in the toughest off-road conditions! it doesn’t afraid of potholes, rocks, branches, mud and water! However, it remains easily removable from the axis of pedal by levering with a thin screwdriver ...

+  It will not rust in the rain...

+  The magnet is compatible with every cycling computer/cadence sensor.

+  It can be installed on every crank

+  It can be installed on every MTB or racing bike pedal (not titanium axle)