Vento All Motorcycles in Salt Lake City

This is a full and complete engine gasket set for the Yamaha XV-250 V-Twin 2V49FMM engine.This complete set includes gaskets for the cylinder, exhaust, head, generator, stator and timing. This full gasket set fits the Diamo Cruiser 250, Keeway Cruiser 250, Keeway Dorado 250, Keeway Supershadow 250, Kingring JL250V, Lifan LF250V, Roketa Vado 250, Vento Colt 250, Vento V-thunder 250, Yamaha XV250 and many others.... Check out my other items!

his is a complete quality NBR Oil Seal Kit for the Yamaha clone XV250 2V49FMM 250cc engine. This complete kit includes all your seals needed for your crankcase and all those leaking engine seals.  These seals fit the Diamo Cruiser 250, Keeway Cruiser 250, Keeway Dorado 250, Keeway Supershadow 250, Kingring JL250V, Lifan LF250V, Roketa Vado 250, Vento Colt 250, Vento V-thunder 250, Yamaha XV250 and many others.... Please visit my eBay Store http://stores.ebay.com/fastchinaparts95 !  Be sure to add me to your favorites list !

This A-3603 bulb, 25/25 watt, is found on many scooters and for running lights on the Vento V-Thunder and others. Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

This is the OEM CDI Ignition for the 2-stroke Yamaha, JOG Minarelli 1PE40QMB, 1E40QMB, E40QMB  scooter, ATV, quad, go-kart, and moped engine.  This CDI fits the Alpha Sports, Bombardier and Hammerhead ATVs, mini bikes, mopeds and scooters as well as Eton, Italjet, Malaguti, TNG, Vento Triton R4, Vento ZIP GT5, Vento Zip R3i. (This CDI has a 2-pin plug, and 3 singles, Black, Red and Red/White) Check out my other items! Be sure to add me to your favorites list!

MEN's size 10 / VENTO  model  NV -117 SANDALS / BLACK & SILVER. Similar in style, design and function as Chaco river sandals but not the clunky sole.Adjustable strap on ankle closure. Sole similar to Vibram.

 This vacuum operated, tank-mounted, fuel valve petcock (aka fuel pump) is found on many engines including the JOG 2-stroke Qingqu QM50QT-4G TGB Vento Zip R3i. These valves often go bad or are suspect. Please check your measurements before ordering since we sell 3 different fuel valves which look exactly alike with the only difference being the internal measurements. All 3 valves have a 22mm nut.  The M16x1.5 offered in this listing is the most common.  We also sell a M16X1.0 and a M14X1.0.  The 1.0 and the 1.5 refer to the thread pitch.  The 1.0 has very fine threads.

This is the Voltage Regulator/Rectifier for the Yamaha based (2V49FMM) QJ250, LF250, XV250 is a vertical, V-twin 2-cylinder, 4 stroke, air-cooled, OHC engine found on Diamo, Keeway, Lifan, Roketa, Vento Colt and V-thunder, Yamaha Virago 250 and others. Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites     Important note for  International buyers...shipments Import duties, taxes & charges are not included in the item price or shipping cost.  These charges are the buyers responsibilities.

This is a ready to install OEM complete Clutch Assembly for the 4 stroke GY6 150cc 157QMJ Chinese scooter, moped, ATV and go-kart engines Clutch Pulley Sheaves Housing Assembly  Clutch Springs Torque Spring This clutch fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others..  Be sure to add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!

This is the OEM replacement belt for the GY6 50cc 139QMB 4-stroke long case engine for Chinese scooters, ATV's & Go-karts.  Scooters with a long case usually have a 12" - 16" rear wheel.  See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.   These are used on Baja, JMstar, Jonway, KYMCO Agility 50, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Check out my other items and be sure to add me to your favorites list!

This is a quality 18mm CV replacement Carburetor for all GY6 4-stroke 139QMB 49/50cc Chinese engines. This is better than stock and comes with a larger venturi, and quality construction. This carburetor is used on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Mechanic Note: This better than stock carburetor comes with an accelerator pump, which will frequently eliminate hesitation when you open her up.

This is a very common regulator rectifier for Chinese made vehicles. It has a 4-prong rectangular connector for the GY6 and Honda Trail style Horizontal engines. This regulator is for the 4 stroke Chinese engines.

This is a quality Cylinder Top End Rebuild Kit for the Left Side on a Yamaha XV250 2V49FMM engine. This excellent kit includes the Cir-clips, Cylinder, Base Cylinder Gasket, Head Gasket, 49mm Piston, Rings, and 13mm Wrist Pin. This Cylinder Rebuild Kit fits the Diamo Cruiser 250, Keeway Cruiser 250, Keeway Dorado 250, Keeway Supershadow 250, Kingring JL250V, Lifan LF250V, Roketa Vado 250, Vento Colt 250, Vento V-thunder 250, Yamaha XV250 and many others....

This is a High Quality Gates PowerLink Belt for the GY6 50cc 139QMB long case engine. This belt fits Baja, JMstar, Jonway, KYMCO Agility 50, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Note: Scooters with a long case usually have a 12" - 16" rear wheel.

This is a 6-pin AC Racing Performance CDI with an Unrestricted Rev Limit and an advanced timing curve for the GY6 50cc 125cc and 150cc engines. Engine applications include the 139QMB, 152QMI, 152QMJ, 157QMI, and 157QMJ.  These CDI's have no governor and eliminate that irritating rev-limiter which might be keeping your engine speed restricted. See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.    This CDI is similar to our orange performance CDI but has a more aggressive ignition advance curve.

This is a Complete OEM replacement Engine Gasket Set for the stock Long Case (10 bolt belt cover) 39mm 4 stroke GY6 50cc, 139QMB engine. This complete gasket set fits the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.

 This is a complete 57.4mm Non-EGR replacement Cylinder Head for the GY6-125/150cc 152QMI 152QMJ 157QMI 157QMJ engine.  This includes the head with fully installed seals, seats, springs, studs and moly coated valves.  The head bolts measure 54mm center to center, square. This head fits the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items!

Wrist Pin Needle Bearing, 12mm, for the 1E40QMB 1PE40QMB 2 Stroke Minarelli JOG engine with the larger piston rod bearing like Vento Triton and other brands. Measurements: I/D: 12.27mm 11 Rollers O/D on the Bearings: 15.45mm O/D on the Frame End: 15.8mm Length: 12.69mm  Check out my other items and please be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

 Belt Cover, Black, (Long Case), Left CVT Cover, GY6-125/150, QMI152/157 and QMJ152/157 engines. Overall length 19", fits Baja,  Boreem (BMS), Matrix 150, Roketa, SUNL, Tank, United Motors, Vento Check out my other items! Be sure to add me to your favorites list!

Belt Cover, Black,  (Long Case Type C), Left Crankcase Cover, measures 18.25 inches, GY6-50, 139QMB, (10 bolt) with 729 belt.   Please read the Mechanics Note below to determine which one you need. Mechanics Note: These covers come in both short case and long case.

These are High Quality 50mm Taiwanese Piston Rings for our GY6 100cc Big Bore Kits used in the GY6 50cc scooters, quads, ATVs, and buggies with Chinese engines. These fit many brands such as Jonway, JMstar, Roketa, Sunl, Tank, TGB, TNG, Vento, VIP and many more. Measurements: 2 Rings: .98mm 2 Rings: .41mm Oil Ring: 1.77mm Mechanics Note:These rings are better than the original and will last and perform better.

This is a Non-EGR, 52mm Big bore Cylinder Head Assembly with the head, valves, springs, studs, seals and seat, already installed for the 125cc upgrade kit.  This has the standard size intake and exhaust valves.  This head is the minimum required to do the 100cc upgrade to the GY6-50 engine.  This head fits the 125cc kit on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

This is the Rotor for the 8-pole stator on GY6 125/150cc engines. These rotors are available in either 6, 8 and 11-pole. These stator generators/rotors are found on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

Cylinder Head, Non-EGR, (47mm), GY6-80,  for the GY6 80cc Big Bore Kit, Good quality casting, machined to fit the larger combustion chambers.  This head has the standard size intake and exhaust valves. This cylinder head fits the 80cc kit on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items!

Belt Cover, Left CVT Crankcase Cover, 1PE40QMB, Minarelli 1E40QMB 1PE40QMB, Overall length 16" , fits Vento Zip R3i and many more Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

6002-RS Bearing, Double Rubber Sealed, Deep Groove Ball Bearing, Self- lubricated, 15mm x 32mm x 9mm, wheel bearing and other uses, Equivalents: 6002-2RS1 & 6002-2RZ & S6002RS This Bearing fits GY6 based Baccio, Baja, Jonway, JMstar, Lifan, Malaguti Wussi, PGO Bugrider, PGO Bugxter, KYMCO, PGO, Roketa, Strada RX150, Sunl, SYM, Tank, TGB, TNG, Vento, Vento Phantom R4i 125cc, Verucci, VIP, Viva, Yamati and many others. Please add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!   See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.

This is a standard replacement belt for the GY6 125/150cc 152QMI 152QMJ 157QMI 157QMJ "long case" engine. . Note: Scooters with a long case usually have a 12" - 16" rear wheel.

Spark Plug, NGK BP7HS, Eton, Suzuki LT50, TGB, Vento Triton, Vento Zip R3i, Yamaha 1PE40QMB, Yamaha Razz and many others.. Specs: •Thread Size: 14mm  •Reach: 12.7mm (1/2 inch)  •Hex Size: 20.6mm (13/16 inch)  •Gap: 0.7mm (.028 inch)  •Heat Range: 7 Check out my other items! Be sure to add me to your favorites list!

This intake manifold fits all 4-stroke GY6 139QMB 50cc engines. This intake has a vacuum line nipple and is easy to install with a 2-bolt installation. Brands and models with this engine type include Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others .

This Stator Flywheel Engine Cooling Fan is for the 4-stroke, GY6 50, 139QMB engine. It will replace faulty or broken fans and keep your engine running cool. You can find this cooling fan on many models such as Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP both the short case and long case motors.   Please add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!     Important note for  International buyers...shipments Import duties, taxes & charges are not included in the item price or shipping cost.  These charges are the buyers responsibilities.

This is a quality replacement Starter Clutch Bendix (Overrunning Clutch) for the GY6, 4T, 139QMB, 50cc engine. Use this quality Bendix to help get that starter clutch to engage and turn the engine over. This Bendix fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

This is the Complete Key Set for the Vespa Hot Rod Classic style scooters (See picture above).  This switch kit includes the complete ignition key switch and seat lock kit and two keys.  Vespa Classic-style scooters  include the Lance Vintage, Roketa Capri, TNG Low Boy, Vento Hot Rod and many others. Check out my other items! Be sure to add me to your favorites list!

Belt Cover Bolt Set, (10 bolts) Long Case, 4 Stroke, GY6 50 139QMB Engine.  Please read the Mechanics Note below to determine which one you need. Mechanics Note: These covers come in both short case and long case. The short case has 8 installation bolts and the long case has 9 or 10 bolts.

This is a German Quality Xtra Power Performance HMK C7HIX Spark Plug for the  horizontal Honda Trail style engines, Honda, Kawasaki KLX and KSR  2 valve Heads on the 49/86/90/110/120/125/140/150/160/170, and Sachs Madass . This plug also fits the GY6 4-stroke 50, 125 & 150cc engines in many models including the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP, and many others.  Many manuals recommend a gap of .5 -.6mm (0.22 -.24 inches).

This is a replacement Piston, Wrist Pin, Cir-clips and Ring Set for 50cc 2-stroke Minarelli 1E40QMB 1PE40QMB JOG engines. This Piston and Ring Set fits many makes and models including the TGB, Vento Triton, Vento Zip R3i, Yamaha and many others.   Measurements: Piston: 40mm Wrist Pin: 12mm Circlips: 2 Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

Airbox  Assembly 2 stroke 49cc JOG Minarelli chineseNew but I purchased it for a bike we never put it on