Buy LSD Doors Lambo Style for VW Vento 1HX0 Vertical on 2040-motos

Vento Vento description

tunershop banner

KW LSD Doors - Lambo Style Door Kit

Manufacturer: VW
Model: Vento
Type: 1HX0

Part#: 50080010

Fits for:

Manufacturer	Model	Type	Engine	HSN / TSN
VW	Vento	1HX0	1.9 TDI 1896ccm 81kw Diesel	0600/AI2
VW	Vento	1HX0	1.4 1391ccm 44kw Benzin	0600/AI2
VW	Vento	1HX0	1.8 1781ccm 55kw Benzin	0600/AI2
VW	Vento	1HX0	1.8 1781ccm 66kw Benzin	0600/AI2
VW	Vento	1HX0	2.0 1984ccm 85kw Benzin	0600/AI2
VW	Vento	1HX0	2.8 VR6 2792ccm 128kw Benzin	0600/AI2
VW	Vento	1HX0	1.9 D, 1.9 SDI 1896ccm 47kw Diesel	0600/AI2
VW	Vento	1HX0	1.9 TD 1896ccm 55kw Diesel	0600/AI2
VW	Vento	1HX0	2.0 16V 1984ccm 110kw Benzin	0600/AI2
VW	Vento	1HX0	1.6 1598ccm 55kw Benzin	0600/AI2
VW	Vento	1HX0	1.4 1391ccm 40kw Benzin	0600/AI2
VW	Vento	1HX0	1.9 TDI 1896ccm 66kw Diesel	0600/AI2
VW	Vento	1HX0	1.6 1595ccm 74kw Benzin	0600/AI2
VW	Vento	1H	1.4 1390ccm 44kw Benzin	0603/AI2
VW	Vento	1H	1.9 D, 1.9 SDI 1896ccm 47kw Diesel	0603/AI2
VW	Vento	1H	1.9 TD 1896ccm 55kw Diesel	0603/AI2
VW	Vento	1H	1.6 1598ccm 55kw Benzin	0603/AI2
VW	Vento	1H	1.9 TDI 1896ccm 66kw Diesel	0603/AI2
VW	Vento	1H	1.8 1781ccm 66kw Benzin	0603/AI2
VW	Vento	1H	1.6 1595ccm 74kw Benzin	0603/AI2
VW	Vento	1H	1.9 TDI 1896ccm 81kw Diesel	0603/AI2
VW	Vento	1H	2.0 1984ccm 85kw Benzin	0603/AI2
VW	Vento	1H	2.8 VR6 2792ccm 128kw Benzin	0603/AI2
VW	Vento	1H	1.8 1781ccm 55kw Benzin	0603/AI2

KW Lambo Style Doors

Safety and quality are LSDs highest priorities.

The LSD door system consists of a specific door hinge which initially opens the factory door 30 degrees outwards, like a common car door and then upwards by the support of a gas shock with minimal effort. The door opens in 2 steps: Step 1: Open the door outwards as usual to a maximum angle of approximately 30 degrees. Allowing comfortable access to enter and exit the vehicle. Step 2: Lift the door after reaching the opening angle of 30 degrees. This is done with ease as the door is supported by the gas shock to an angle of approximately 40 degrees. The LSD door hinges are installed at the original mounting points of the dismantled factory hinges. A range of adjustability is built into each LSD door hinge for perfect alignment and operation. Additional features also include limits that prevent the doors from being open too far as well as avoiding contact of the rocker panel.

Valuable research and development of materials and data is integrated into our LSD product. The lateral deformation of the hinges is an important safety aspect. LSD hinges have been tested against the hinges of our competitors. To see the result, please click here. Crashtest Side impact test according to ECE-R 95 and EG guideline 96/27/EWG A side impact test on an Audi TT equipped with LSD door hinges has been conducted by the DEKRA Accident Research and Crash Test Center according to ECE-R 95 and EG guideline 96/27/EWG. A moving barrier accelerated to 50 km/h (30 mph) to impact 100% of the side of the vehicle. A dummy (type Euro-SID 1) was utilized to measure the passenger protection and to identify the loads on head, chest, abdomen and pelvis. The side impact test impressively proved: vehicles equipped with LSD doors offer the necessary protection and guarantee optimum safety for their passengers. Tensile Force Comparative Test Tensile Force Comparative Test according to EWG guideline 70/387/EWG The force increases permanently to 9.000 Newton. The test takes about 10 minutes for each hinge (shown here in fast motion). The force gradually decreases after reaching the maximum force. Each hinge is now measured how far it is reforming to its original shape.

One LSD kit includes:

Pre-assembled LSD hinges with gas shock

Mounting hardware for hinges

Wire set for vehicle specific extensions of wire harnesses including mounting material

Insulated wire connectors including flexible insulation tape

TV certificate