2012 Honda Cbr250r Abs on 2040-motos

Honda CBR tech info

Type:Sportbike Phone:(877) 437-1631

Moto blog

FIM to Revise WSBK Homologation Requirements

The International Motorcycling Federation is considering modifying its homologation requirements for the World Superbike Championship following Bimota‘s somewhat surprising plans to re-enter the series. Under current regulations, manufacturers must produce a minimum number of motorcycles for it to be eligible to compete in the production-based WSBK championship. The official regulations currently require a minimum of 125 units produced for an initial homologation inspection, 500 units produced by June 30 of the current year, 1,000 units by the end of the current year and 2,000 units by the end of the following year.

NEW: Yoshimura ends cans for Honda CB1000R

LEGENDARY JAPANESE tuning house Yoshimura has designed a series of slip-on performance end cans for Honda’s naked CB1000R.The brand new EEC-approved cans bolt straight onto the bike's exiting pipework and feature a stainless steel end cone and integral lower Yoshimura logoed cat-converter heat shield. Even with the dB-Killer baffle in place peak power is improved, as is mid-range torque with further performance gains available if the baffle is removed.A full race mid-pipe, extracting yet more power is on the way and will be available later in the year. The Yoshimura CB1000R Slip-On, including the supplied heat shield, is over 4kgs lighter than the OE item, the Carbon sleeve, even more so at just 4.65kg.Part Number/Sleeve Type/Weight/RRP including VAT1A0-480-5B50         Stainless Steel           2.61kg                       £712.711A0-480-5B80          Titanium                    2.45kg                        £770.181A0-480-5B80B         Titan Blue                 2.45kg                        £850.651A0-480-5B90          Carbon                      2.35kg                        £896.631A0-480-5B20          Metal Magic               2.61kg                        £793.17         Noise Output (decibels)Standard end can: 94dB    @ 5,000rpmYoshimura EEC Slip-On:  94.5dB @ 5,000rpm(with db-killer in place)

Very, very, very fast Honda C90!

Takegawa are a company based on Osaka, Japan. They make so many hop-up parts for small Honda engines that it's possible to build a brand new, complete engine from their catalogue using no Honda parts at all. Four valve heads, double overhead camshaft kits, stroker cranks, big bore Nikasil barrels, slipper pistons, dry clutches, huge carbs and close ratio gear kits are all available.