2014 Honda Ctx700 on 2040-motos

Honda CT tech info

Type:Touring Phone:(866) 236-1792

Moto blog

NEW: Yoshimura ends cans for Honda CB1000R

LEGENDARY JAPANESE tuning house Yoshimura has designed a series of slip-on performance end cans for Honda’s naked CB1000R.The brand new EEC-approved cans bolt straight onto the bike's exiting pipework and feature a stainless steel end cone and integral lower Yoshimura logoed cat-converter heat shield. Even with the dB-Killer baffle in place peak power is improved, as is mid-range torque with further performance gains available if the baffle is removed.A full race mid-pipe, extracting yet more power is on the way and will be available later in the year. The Yoshimura CB1000R Slip-On, including the supplied heat shield, is over 4kgs lighter than the OE item, the Carbon sleeve, even more so at just 4.65kg.Part Number/Sleeve Type/Weight/RRP including VAT1A0-480-5B50         Stainless Steel           2.61kg                       £712.711A0-480-5B80          Titanium                    2.45kg                        £770.181A0-480-5B80B         Titan Blue                 2.45kg                        £850.651A0-480-5B90          Carbon                      2.35kg                        £896.631A0-480-5B20          Metal Magic               2.61kg                        £793.17         Noise Output (decibels)Standard end can: 94dB    @ 5,000rpmYoshimura EEC Slip-On:  94.5dB @ 5,000rpm(with db-killer in place)

K-Tech release 25SSK for Big Piston Forks

K-Tech have released their popular 25SSK front fork open cartridge system to fit all Showa Big Piston Forks. Here's what K-Tech have to say about them: These lightweight aluminium units are supplied to the same exacting specification as all other 25SSK fitments with 14mm piston rods and a 25mm cartridge tube, the 14mm piston rods displace a large volume of oil through the 25mm control pistons giving enhanced damping characteristics over the standard Big Piston Fork and allow a bigger volume of air for a more precise feel at the bottom of the fork travel. The cartridge kits have compression and rebound adjustment in both legs and are supplied with 1.5mm Flow Control Valves for a more accurate adjustment, all necessary hardware is supplied to convert the Big Piston Forks to take the cartridges but it is necessary to order the springs you require as these are not included, customer price for the 25SSK cartridges is £725.00 + VAT and are available for the following models:- Honda CBR1000RR 2012 Kawasaki ZX6-R 2009-2012 Kawasaki ZX10-R 2011-2012 Suzuki GSXR600 2011-2012 Suzuki GSXR1000 2009-2012 Contact K-Tech on: +44(0)1283 559007.

Pulling the pin ...

WARNING: Not for the squeamish. You're looking at surgeons removing a pin from Ten Kate Honda man Jonathan Rea's wrist. The World Superbike frontrunner underwent surgery after sustaining fractures during a fall in qualifying at Imola, which hampered the Irish racer's end of season performance.