Hodaka All Motorcycles, page #39

FREE SHIPPING ONLY APPLIES TO THIS ITEM WHEN SHIPPED WITHIN THE USA. I am away during the weekends, and will be happy to answer any questions when I return. This is a new set of "NEW" shorty levers.

FREE SHIPPING ONLY APPLIES TO THIS ITEM WHEN SHIPPED WITHIN THE USA. I am away during the weekends, and will be happy to answer any questions when I return. This is for a 7/8" "Flanders" unversal Kill switch.

Stasto Banchoko 3 - Hodaka Natsumi Houkago Teibou Nisshi Gacha Keychain (Brand NEW unopened & Ready to Ship!) Details: Size: Length Approximately 1.89 - 2.37 inch Type: Rubber Keychain Description: Contact us: We can be contacted at any time through eBay messages or email if you have any questions, comments, or product requests. We will respond to you within 24 - 48 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns!

Hodaka motorcycles were some of the most creatively marketed and designed motorcycles in America. The brand was also a pioneer in the trail bike world and a race winner in all types of off-road competition. The bike of choice for the hip young racer, the street-savvy hipster or the 14-year-old boy's favorite poster, these machines had colorful logos, advertising and terrific names.

MAGURA SHORTY BRAKE LEVER for HONDA & HODAKA. Uses Original Perch and Cable-Easy to Install. Original "Magura" BLACK Max Shorty LEVER with 7mm Pivot Hole and 8mm Cable End.

THIS IS FOR ONE NEW OLD STOCK HODAKA FRONT STOP LIGHT SWITCHS SPRING . IT IS IN VERY GOOD CONDITION. .

THIS IS FOR ONE NEW OLD STOCK  HODAKA  SHIFT SHAFT SPRING ( RIGHT SIDE ) PART NUMBER 904617 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE MAY HAVE SHELF WARE AND MINER RUST. PLEASE LET US KNOW IF YOU ARE STILL SHOPPING. Returns are accepted.

IT IS IN VERY GOOD CONDITION. PART NUMBER 904011 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE . PLEASE LET US KNOW IF YOU ARE STILL SHOPPING.

THIS IS FOR ONE NEW OLD STOCK HODAKA CLUTCH PLATE. IT IS IN VERY GOOD CONDITION SOME MINER SURFACE RUST. PART NUMBER - 904007 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE .

THIS IS FOR ONE NEW OLD STOCK HODAKA 4TH COUNTER GEAR 25 TOOTH . IT IS IN VERY GOOD CONDITION SOME MINER SURFACE RUST. PART NUMBER - 924605   THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE .

THIS IS FOR ONE NEW OLD STOCK HODAKA CRANK SHAFT SEAL FOR EARLY MODELS THEY ARE IN VERY GOOD CONDITION . PART NUMBER 901010 17 X 30 X 6     THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE . PLEASE LET US KNOW IF YOU ARE STILL SHOPPING.

THIS IS FOR ONE NEW OLD STOCK HODAKA 3RD COUNTER GEAR 27 TOOTH . IT IS IN VERY GOOD CONDITION SOME MINER SURFACE RUST. PART NUMBER 924604 PLEASE LET US KNOW IF YOU ARE STILL SHOPPING.

THIS IS FOR ONE NEW OLD STOCK HODAKA FRONT BRAKE CAM. IT IS IN VERY GOOD CONDITION. PART NUMBER 909222 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE BUT IN GOOD CONDITION.

THIS IS FOR ONE NEW OLD STOCK HODAKA CLUTCH FRICTION DISC . IT IS IN VERY GOOD CONDITION. PART NUMBER - 924006 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE .

THIS IS FOR ONE PACKAGE OF 38 NEW OLD STOCK HODAKA COUNTER SHAFT BALL (5/16") IT IS IN VERY GOOD CONDITION. . PART NUMBER 904608 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE BUT IN VERY GOOD CONDITION.

THIS IS FOR 5 NEW OLD STOCK HODAKA 5 AMP FUSES IN THE BOX. IT IS IN VERY GOOD CONDITION. PART NUMBER -  909420 BAND IS MBK .

THIS IS FOR ONE NEW OLD STOCK  HODAKA  BRAKE ROD SPRING PART NUMBER 909107 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE . PLEASE LET US KNOW IF YOU ARE STILL SHOPPING. Returns are accepted.

THIS IS FOR ONE NEW OLD STOCK  HODAKA  STEEL KICK ROLLER RETAINER FOR THESE MODELS Ace 90, Ace 92, Ace 92B, Ace 92B+ and the Model 93 Super Rat PART NUMBER 904714 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE . PLEASE LET US KNOW IF YOU ARE STILL SHOPPING. Returns are accepted.

THIS IS FOR ONE NEW OLD STOCK HODAKA CORK CLUTCH COVER GASKET  FOR ALL 90, 100 AND 125CC HODAKA'S PART NUMBER 904011 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE . PLEASE LET US KNOW IF YOU ARE STILL SHOPPING. Returns are accepted.

THIS IS FOR ONE NEW OLD STOCK HODAKA CLUTCH FRICTION DISC . IT IS IN VERY GOOD CONDITION. PART NUMBER 904006 THIS IS A NEW OLD STOCK ITEM NOT IN PACKAGE .

Hodaka Seat. 1970-1978 Dirt Squirt, Road Toad. Super Combat, Super Rat, Wombat. Metal Pan. Metal Base.

NIB Motorcycle ATV Flywheel Puller 12 hole Seadoo Kawasaki Polaris Yamaha Hodaka Click Thumbnails to Enlarge Product Details PRODUCT SPECIFICATIONS Brand: PM Condition: New Manufacturer PN: SD37 NIB Motorcycle ATV Flywheel Puller 12 hole Seadoo Kawasaki Polaris Yamaha Hodaka PRICE PER UNIT This item is new and recently ordered. Description: Puller Flywheel. Special 12 Hole UNIVERSAL Flywheel Puller Disc w/ 6mm & 8mm Bolts  Fits: Universal Application. Seadoo Yamaha Kawasaki Polaris Watercraft. Also fits Motorcycles, ATV, M/C, and Snowmobile  POLARIS ATV: Most SPORTSMAN 700cc 4 Stroke Quad Models. (Also Fits Most: Polaris Snowmobile Models) YAMAHA MOTORCYCLE:  Fits Most XV250, XV500, XV535, XV700, XV750, XV920, XV1100 VIRAGO, XVZ12, XVZ13 VENTURE & ROYALE Series, BW200, BW350, TT/XT600, (2001-2002) YZF-R6, YFM200, YFM250, YFM600, YFM660 & YFM700 Quad Models HODAKA: Fits Most HODAKA 175cc-250cc Engine Models KAWASAKI JETSKI: Fits Most 300cc, 440cc, 550cc & 650cc Engine Models YAMAHA PWC: Fits Most 550cc, 600cc, 701cc, 760cc, 1100cc & 1200cc Engine Models Cross Reference:   Manufacturer PN:  Returns IN NEW ITEMS accepted in 14 days"""ONLY""" if they have NOT being installed and are in similar condition as when they were shipped.

Needs recovered solid see pics foam not crusty

 EARLY HODAKA LICENSE BRACKET TAIL LIGHT.  LEN DOES HAVE SCRATCHES FROM STORAGE.  ONE WIRE DOES NOT HAVE THE PUSH-IN BULLET CONNECTOR. 

PLEASE READ CAREFULLY   THIS FITS; HODAKA MODEL 96 DIRT SQUIRT AIR BOX QVMX  makes our plastic and rubber like products out of the highest quality polyurethane available for longer lasting, better looking stuff for your ride. All parts of our products are made in house for unsurpassed quality control. Quality and service sets us apart from everyone else.

This is a Preowned and used Hodaka Headlight bucket Assembly that is in great shape for age. Freshly sandblasted, primed, painted. Please see pictures as they are of the actual part for Auction or sale.

This is a brand new unused part Genuine NOS OEM Hodaka part, Kokusan Denki part new. Please see pictures as they are of the actual part for Auction or Sale. All parts mail out same or next business day.

Yamaha Yamaha Vintage Motorcycle YG YM YL YD YH  1 FOOTPEG SET NOS NPN Oem NOTE*  Very Old Yamaha (or possibly Hodaka) footpeg set. Early on, Yamaha had fixed pegs on alot of models like the YG1 and they were reto-fitting some models with the folding type as you see here later on. I am fairly certain these are Yamaha, Japanese for sure....

This a Preowned and used 1971 Hodaka front brake lever Assembly & cam! Please see pictures as they are of the actual part for Auction or Sale.

Great used Preowned 1971 sand blasted primed painted foot peg rest See pictures as they are of the actual part for Auction or sale. Thank you

For your consideration is An original OEM Air Cleaner mounting Clamp base. Please see pictures as they are of the actual part for Auction or Sale. All orders ship out same or next business day.

Preowned and used pair of rear shocks and springs with lots of rust. Please see pictures as they are of the actual book for Auction or Sale. Thank you!

This is a used and Preowned 1971 voltage rectifier 6 Volt OEM, NOS Hodaka ACE ignition part. Please see pictures as they are of the actual part for Auction or Sale. Thank you.

Pre owned 1971 Rear Hodaka fender off of a ACE Hodaka 100B. There is some damage around the tail light mounting area. Also on end of fender shows scratches some dents!

This is a used set of original Hodaka ACE 100 handle bar bracket's, tighten down, handlebars brackets. Please see pictures as they are of the actual part for Auction or Sale. Thank you

Please see product details and pictures as they are of the actual part for Auction or Sale. All orders will mail out same business day or next business day. Thank you The EV Family These are new Genuine Kokusan Denki part.

HERE IS A LOT OF 9 1960S/70S CYCLE ILLUSTRATED MAGAZINE, ALL 9 ISSUES HAVE BOX SAT AND ARE IN GOOD CONDITION TO COLLECT,YOU GET THESE 9 ISSUESFEBRUARY 1969APRIL 1969JUNE 1969AUGUST 1969NOV./DEC. 1969FEBRUARY 1970APRIL 1970JUNE 1970JULY 1970SO PLEASE CHECK OUT THE PICTURES AND ASK ANY QUESTIONS YOU MAY HAVE,THANKS FOR LOOKIN AND ENJOY.ALL ISSUES ARE FOR SALE AT 15.00 EACH AND FREE U.S. SHIPPING JUST ASK,

Vintage Testi fender. Fits TESTI TS 4 MOTORCYCLE. measures 33' long, 25.5 tip to tip, 3.75" wide and 9" tall Classic Vintage Testi TS 4 Motorcycle Tessa Hodaka AHRMA original  I HAVE THE FRAME LISTED IN ANOTHER AUCTION.

Used folding peg from a 1960s 1970s dirt bike. Shows rear and use, but still folds up. Media cleaned, a few rough edges, no slip ridges show wear,  but still a good budget part.

Condition:  Please look at all pictures. Part was removed from a 1972 Hodaka ACE 100 Scrambler. What you see in the pictures is what you get.

This is a good used head off a 1973 Hodaka Wombat 125 Frame # C-09982. We have many other parts available check out Mikes Motorcycle parts for more parts. Shelf 2T Thank you for looking at an item from Mikes Motorcycle Parts.  All parts are shipped out within1 business day of payment clearing.

yz12910rv store This is a new old stock bushing off a 1973 Fuji Hodaka 80. We have many other parts available check out Mikes Motorcycle parts for more parts. Shelf 2-D Please look at all pictures and read entire description before buying.

yz12910rv Store chok plunger assembly

yz12910rv Store This is a good used carburetor off a 1973 Hodaka Wombat 125 Frame # C-09982. It will need to be rebuilt. We have many other parts available check out Mikes Motorcycle parts for more parts.

1972 - 1973 HODAKA WOMBAT GASKET SET This gasket is cut from material equal to or exceeds OEM quality. We have many more gaskets that we can cut, If you do not see the gasket you need send us an email with Year, make, model and gasket you need, We will see if we can have it cut for you.  We use a Gasket-on-Demand program and cutter, with material that is equal to or exceeds OEM quality!  Material INFO: Made By "Inter Face Solutions" in the "USA" PF-4N Description: PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290oC (550oF).

1972 HODAKA SUPER RAT GASKET SET A This gasket is cut from material equal to or exceeds OEM quality. We have many more gaskets that we can cut, If you do not see the gasket you need send us an email with Year, make, model and gasket you need, We will see if we can have it cut for you.  We use a Gasket-on-Demand program and cutter, with material that is equal to or exceeds OEM quality!  Material INFO: Made By "Inter Face Solutions" in the "USA" PF-4N Description: PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290oC (550oF).

1973 HODAKA COMBAT WOMBAT GASKET SET A This gasket is cut from material equal to or exceeds OEM quality. We have many more gaskets that we can cut, If you do not see the gasket you need send us an email with Year, make, model and gasket you need, We will see if we can have it cut for you.  We use a Gasket-on-Demand program and cutter, with material that is equal to or exceeds OEM quality!  Material INFO: Made By "Inter Face Solutions" in the "USA" PF-4N Description: PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290oC (550oF).

Vintage Connection

This listing is for a Hodaka Morishima Pop Up Parade Statue 2019 Good Smile Company Sealed Item is new and sealed in box. Box itself may show minor signs of wear/age from previous shelf use. See photos for further details on condition.

Vintage 1970's Hodaka 125 Motorcycle Owners Hand Book & Parts List.Minor Wear As Shown,Very Good Shape..Buyer pays $4.95 S&H.

Vintage 1970's HODAKA Motorcycle Racing Shirt Size Large.Minor Wear As Shown,Very Good Shape..Buyer pays $11.95 S&H.

AD IS SUITABLE FOR FRAMING AND WILL LOOK GREAT HANGING IN YOUR OFFICE, MAN CAVE OR SHOP - HUNDREDS MORE ADS POSTING IN THE COMING WEEKS SO PLEASE CHECK BACK. THANKS! SAM - MY PRINT ADS AVERAGE OVER 60 YEARS OLD - THEY ARE ORIGINAL ADS FROM PUBLICATIONS AROUND THE WORLD, NOT RE-PRODUCTIONS OR RE-PRINTS - FOR CONDITION, SIZE AND ANY DEFECTS PLEASE READ THE ITEM CONDITION SELLER NOTES BLOCK ABOVE - YOU WILL RECEIVE THE AD IN THE PICTURE SO PLEASE TAKE A GOOD LOOK SO YOU KNOW EXACTLY WHAT YOU ARE GETTING - SOME ADS MAY HAVE BEEN PART OF ORIGINAL MANUFACTURER BROCHURES, PRODUCT SPECIFICATION SHEETS OR CAR SHOW/PRODUCT SHOW PROGRAMS - SOME OF THE ADS POSTED MAY NOT HAVE THE DATES ON OR IN THE AD.

USED PARTS. SEE PICTURES FOR ANY DAMAGE.  Shipping Listed is for the Lower 48 US States via United States Postal Service or FedEx. Hi/AK/PR/APO AP may be higher.

USED PARTS. SEE PICTURES FOR ANY DAMAGE.  Shipping Listed is for the Lower 48 US States via United States Postal Service or FedEx. Hi/AK/PR/APO AP may be higher.

USED PARTS. SEE PICTURES FOR ANY DAMAGE.  Shipping Listed is for the Lower 48 US States via United States Postal Service or FedEx. Hi/AK/PR/APO AP may be higher.

This is an original ad measuring approx 8" x 11" and is in excellent condition. Ads are original magazine pages from the year of the item, not brochures and not copies. Ads look great framed and displayed in your home or business.  All ads are carefully shipped with a cardboard insert and marked "Do Not Bend." You are purchasing the advertisement only and not the magazine or product being advertised.  Thanks for your interest.  Please check out my vintage ads store.

 Right outer case cover for Hodaka.  Will fit multiple models.  View the photo to confirm your application.  No cracks....decent case.  Thanks for looking

Here is a factory folded early brochure for a Hodaka in very good condition, however it has three holes punched for a loose-leaf binder.  It measures aprox. 3.5" x 8.5" and opens to three times that size. Not sure of the year on this maybe 1968.