-
2005 Custom Built Motorcycles Chopper (2005)
Killa Bee 2005 CUSTOM CHOPPER LESS THAN 500 MILES - IRONHORSE TRAILER INCLUDED - LOW RESERVE The “Stinger Bike” Project Featured in HOT BIKE Magazine February 2006 If you have ever been wanting a custom “one off” chopper but could never find the “right one” your search may be over. Once you view the details and history of this chopper and the special features along with the 2013 Ironhorse (2 Bike 1 Trike) model Trailer that is INCLUDED with this listing you may say THIS IS THE ONE ! Yes, the trailer mentioned above will be included if the LOW RESERVE is met.2016-12-19 04:37:47Hendersonville, North Carolina, United States49519000 -
2016 Custom Built Motorcycles Chopper (2016)
Custom built 2016 using a Redneck Engineering Lowlife Roadster Chassis. North Carolina Special Construction title. 42 Degree rake with Redneck Engineering 3 Degree trees. -1" down tube, 3" backbone stretch.2016-12-04 04:39:10Nashville, North Carolina, United States5018,000.00 -
2005 Custom Built Motorcycles Chopper (2005)
This bike is not your average custom bike it is very stylish, fast, and loud. Long and low style, with drop seat frame 8" out 0" up stretch, 40 degree neck with 7 degree trees with 3" under forks. The Engine is a S&S 96 cubic inch motor, 250 rear tire 90/90-21" front tire, Wire wheels, One color paint Flat black, LSD 6 speed transmission (Primo Rivera), Single down tube softail frame 40 deg rake 8" Backbone Stretch and 0" Down tube Stretch, 3" Stretch--center of transmission to center of rear axle. 103" overall length, Drop seat frame, 18" seat height at frame, Tube Forks 2" under-7 deg trees, Speedometer w/trip meter (Dakota Digital), Custom exhaust pipes (Jokers), Steel front and rear fenders, and Carbon fiber composite gas tank.2016-12-04 04:39:08Raeford, North Carolina, United States59,600.00 -
2015 Custom Built Motorcycles Chopper (2015)
Up for Auction is a 2015 Custom Chopper Motorcycle built by 3 Stooges Customs from Eden, North Carolina. It was part of an estate and has only been driven 6 miles since it was completed. The engine is a Fatso high performance motor with a compression relief valve to start the bike.2016-11-16 04:43:30Greensboro, North Carolina, United States628000 -
2007 Custom Built Motorcycles Chopper (2007)
ORIGINAL STCIKER PRICE $50000.00 110 Horse Power! 6 Speed Transmission! 1 Off Wheels!2016-11-14 04:43:37Troutman, North Carolina, United States58915000 -
1998 Custom Built Motorcycles Chopper (1998)
ONE OF THE COOLEST ON EBAY! BIKE STARTED LIFE AND IS TITLED AS A 1998 AMERICAN EAGLE CUSTOM BIKE WAS STRIPPED OF ALL 2000'S ERA CHOPPER JUNK AND ELECTRONICS AND BUILT IT TO BE FUNCTIONAL AS AN EVERYDAY RELIABLE RIDER 5K + IN NEW PARTS AND LABOR APPROX 7500 MILES APPROX 2500 MILES ON ALL NEW PARTS 96" S&S SUPER E CARB JIM'S 6 SPEED TRANS BMC PRIMARY NEW PARTS INCLUDE 60 SPOKE'S FRONT AND REAR - FRISCO STYLE TANK - JESSE JAMES REAR FENDER - TRACKER HANDLE BARS - 6" RISERS - NARROW GLIDE TREES - SEAT & SPRINGS - BILTWELL WHISKEY THROTTLE - LAF DRAG PIPES - ETC ETC. REAR PERFORMANCE MACHINE BRAKE CALIPER TANK AND FENDER WERE PURPOSELY COATED TO RUST AND WERE CLEARED WITH MATTE CLEAR TO PRESERVE. LOOKS AMAZING! THIS BIKE RIPS AND SOUNDS WICKED!2016-10-23 04:37:38Boone, North Carolina, United States710,998.00 -
2006 Custom Built Motorcycles Chopper (2006)
Photo Viewer 2006 Motorcycle Low Curves 2006 REDNECK ROCKETS LOW CURVES CUSTOM CHOPPER VIEW OTHER AUCTIONS ASK SELLER QUESTION Vital Information Year Make Model Mileage 2006 Motorcycle Low Curves 100 Exterior Interior Stock # VIN Purple/Blue 05000104 RERC2820305000104 Engine view window sticker view new window sticker Photos TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 Description 2006 Motorcycle Low Curves 2006 REDNECK ROCKETS "LOW CURVES" DID YOU EVER WANT TO SIT "IN" YOUR BIKE? GET LOW WITH THIS "LOW CURVES" FRAME, BASED ON THE AWARD WINNING PATENTED FRAME DESIGN (D494,106) CURVES THAT FLOW LIKE THE LINES OF A CLASSIC MOTORCAR, COMBINED WITH A SWOOPY TANK TO CREATE YOUR OWN HOT ROD STYLE BIKE. OPTIONS: CURVED SINGLE DOWNTUBE CUSTOM FLAME PAINT W/MULTI COLOR FLAMES PURPLE/BLUE REVTECH V-TWIN ENGINE HYDRAULIC CLUTCH HYDRAULIC FRONT CLUTCH 21" BILLET ALUMINUM FRONT WHEEL 18" BILLET ALUMINUM REAR WHEEL 80/90-21 FRONT TIRE 300/35R-18 REAR TIRE BILLET GRIPS PASSENGER FOOT PEGS BRAIDED STAINLESS CABLES AND LINES BILLET CLUTCH/BRAKE LEVERS BILLET FOOT PEGS BILLET BELT PROTECTOR Contact Us Dealer Contact Formula One Imports 5371 E Independence Blvd Charlotte, NC 28212 888-615-1264 Map Secure Online Credit Application IF YOU ARE CONSIDERING FINANCING YOUR PURCHASE FROM US, YOU HAVE COME TO THE RIGHT PLACE!2016-08-13 04:48:10Charlotte, North Carolina, United States1007,999.00 -
2011 Custom Built Motorcycles Chopper (2011)
2011 Ultima El Bruto chopper with Nitro soft tail frame, big head turner No Free Rides2016-07-18 04:53:12Thomasville, North Carolina, United States111,000.00 -
2001 Custom Built Motorcycles Chopper (2001)
Here is a rarely available for sale Choppers Inc chopper built by Billy Lane. Built in 2001, "Choppersaurus REX" featured in EasyRiders Magazine February 2002. It shows it age with some knicks and chips that are shown in pictures.2016-07-17 04:49:33Gastonia, North Carolina, United States141000 -
2004 Custom Built Motorcycles Chopper (2004)
2004 Redneck Lowlife Custom Chopper with very low miles, 100 cc Rev Tech engine, custom orange lights, a 250" wide back tire. Orange paint with custom designs. I had the bike built by Redneck Engineering out of South Carolina. Will never see another one like it. It is a head turner but just don't have the time to ride.2016-07-14 05:00:07Randleman, North Carolina, United States312,500.00 -
2003 Custom Built Motorcycles Chopper (2003)
If you are anything like me, the first bikes that really made an impression on you were probably choppers. They were the choice of club guys back in the day. I never watched some fat dude on a bagger go by and wished I could be riding something with a windshield and radio.2016-07-13 04:53:26Monroe, North Carolina, United States1035000 -
2010 Custom Built Motorcycles Chopper (2010)
2010 CUSTOM BUILT CHOPPER. 96" S&S MOTOR. 5 SPD TRANSMISSION . 200 REAR TIRE.2016-07-12 04:52:47Hot Springs, North Carolina, United States238000 -
2008 Custom Built Motorcycles Chopper (2008)
2008 Metropolitan Choppers Custom “Messerschmitt” Built For G. Gordon Liddy “Battle of Britain” builds won by G. Gordon Liddy He appeared on a celebrity edition of NBC TV show ‘Fear Factor’, it was the show series finale, on September 12,2006.2016-07-12 04:52:17Fayetteville, North Carolina, United States020000 -
2006 Custom Built Motorcycles Chopper (2006)
I bought this bike from an individual in 2011. He had it built in 2006 by Midwest Motorcycle Manufactures. I'm told he had close to $30 in it.2016-07-10 04:52:02Charlotte, North Carolina, United States118,500.00 -
2003 Custom Built Motorcycles Chopper (2003)
2003 CUSTOM MOTORCYCLE CHOPPER, BUILT BY LAKE NORMAN V TWIN, 124 S&S POLISHED MOTOR, 6 SPEED TRANSMISSION PRO 1, DAYTECH ,SOFT TAIL CHASSIS, CAROLINA CUSTOM CHROME WHEELS,250 rear tire, EEL SKIN SEAT, 5600 miles, This bike not only looks good it rides good, and is definitly a head turner! $17,000.00 or best offer.In Mooresville, NC areabuyer to arrange delivery2016-07-06 04:51:47Mooresville, North Carolina, United States517,500.00 -
2010 Custom Built Motorcycles Chopper (2010)
Custom Chopper! Strong 110ci Revtech motor back with a 6spd and right side drive! This thing is awesome to ride!2016-06-27 04:51:56High Point, North Carolina, United States9917000 -
2006 Custom Built Motorcycles Chopper (2006)
2005 custom built chopper 113 cubic in motor and built with all of the best..open primary, Arlen ness heads , Diamond cut motor , custom fabrication on frame2016-06-25 04:49:29Whitsett, North Carolina, United States15049000 -
2010 Custom Built Motorcycles Chopper (2010)
89 HP Rigid MINT On Jun-13-16 at 14:00:33 PDT, seller added the following information: Some recent damage, will fix!!2016-06-15 05:11:29Raleigh, North Carolina, United States112,000.00 -
1999 Custom Built Motorcycles Chopper (1999)
An American Eagle (STM-C) soft-tail custom chopper manufactured in 1999 with lots of chrome, beautiful custom paint with low miles (15,438). This custom chopper was featured in a Montgomery Gentry video starring Eddie Montgomery and Troy Gentry. This bike has been well maintained and always been garage kept.2016-06-14 15:19:43Durham, North Carolina, United States156100 -
Redneck Rocket from Redneck Engineering -+ (2004)
Everything Chrome or Billeted S&S Super Sidewinder polished Pro one transmission billeted polished,3" Primary Drive Polished, hydraulic polished hand controls, billeted JB forward controls one off front and rear billeted wheels Avon 18' front Avon 21 250X40 rear Billeted clappers front rear, Grandur Stall clutch ECT.ECT. and Ect its has got the best!2014-04-04 05:39:12Mount Airy, North Carolina, United States5,0001500000 -
Black Beauty (2010)
2010 War Eagle chopper, Red Neck frame, leather seat, This chopper is configured with a 38 degree rake, 8" up and 8" back bone stretch, powdercoat frame, hardtail, Ultima El Bruto special "BLACK KNIGHT" 127 ci engine, complete Ultima driveline, 6 speed transmission , drag style open primary, 300 rear?tire. Call Chris at 336-362-449eight. It is a work number but ok to leave messages2013-12-05 23:55:01high point, North Carolina, United States1,50015900 -
CLARK CUSTOM CHOPPER ORANGE & CHROME PINSTRIPED 2007 EXCELLENT CONDITION (2007)
CLARK CUSTOM CHOPPER ORANGE & CHROME PINSTRIPED 2007 EXCELLENT CONDITION Check out our other eBay auctions! Item Description: You Are Bidding On CLARK CUSTOM CHOPPER ORANGE & CHROME PINSTRIPED 2007 EXCELLENT CONDITION This CLARK CUSTOM CHOPPER ORANGE & CHROME PINSTRIPED 2007 EXCELLENT CONDITION is in Excellent Condition!! Includes: CLARK CUSTOM CHOPPER ORANGE & CHROME PINSTRIPED 2007 EXCELLENT CONDITION CLARK CUSTOM CHOPPER ORANGE & CHROME PINSTRIPED 2007 EXCELLENT CONDITION! WOW!2013-10-22 00:38:25Asheville, North Carolina, US50014,999.95 -
Swift Punisher RF Motorcycle 2004-In Excellent condition (2004)
Swift Custom Rigid Frame, American made chopper. S & S Super Sidewinder 113 cubic inch Engine. Baker Transmission. Performance Brakes. Chromed out. 240 back tire/ chrome rims and accessories. 2 inch frame. Mechanically sound and well maintained. Only issue is a few nicks/chips on paint.2013-10-22 00:36:53Mount Olive, North Carolina, US13,00011,950.00 -
2001 Boar Chopper! Rigid, springer, 107Cu.In! (2001)
I have limited info as the previous owner knew little about it: 2001 Custom chopper with a springer front end, rigid rear, TP Performance 107Cu.In. engine, not sure about brand on the transmission but I will say it is silky smooth! It has around 4500 miles on it and I actually road it from Columbia,SC to Charlotte when I picked it up.2013-10-22 00:40:31Charlotte, North Carolina, US4,5003,550.00 -
2007 RPM CUSTOM CHOPPER (FLYING PURPLE MOTHERSUCKER) (2007)
2007 RPM custom chopper ( FLYING PURPLE MOTHERSUCKER) is a one off custom built high end chopper that was featured in Barnett's magazine back in 2007 when it was built. It's a Carolina customs frame with a Jerry's springer custom tribal front end, 120 inch Ultima El Bruto motor with 138 horsepower and a Slick shift 5 speed tranny with a BDL 31/2 inch top fuel open primary with a chain final drive. This bike was custom painted by Justine Barnes who was the original painter for OCC on all there original theme bikes from the American chopper TV show on the discovery channel.2013-10-17 00:48:28Jacksonville, North Carolina, US1,29023,999.00 -
Custom Built Chopper 114ci V-Twin 6 Speed "Money" (2005)
information@RKMotorsCharlotte.com 5527 Lakeview Road, Charlotte, NC, 28269, US 2005 Custom Chopper Custom Built Chopper 114ci V-Twin 6 Speed "Money" Year: 2005 Type of vehicle title: Clear Primary color: Green Mileage: 3000 Transmission type: 6 Speed Manual Engine: 114ci V-Twin Interior color: Black Vehicle info Biker Build-Off went off the air in 2007, West Coast Choppers shut down in October 2010, and American Chopper is more focused on family drama than bikes. Does that mean the chopper scene is dead? Of course not.2013-10-20 00:09:27Charlotte, North Carolina, US3,0006,100.00 -
HARLEY CUSTOM CHOPPER (2013)
REDMAN IS FOR SELL****CUSTOM BUILT CHOPPER. '76 HARLEY SHOVELHEAD MOTOR COMPLETELY REBUILT TO 80" BY LOCAL HD STEALERSHIP. EVERYTHING IN ENGINE IS NEW.2013-10-03 01:00:05Roanoke Rapids, North Carolina, US5008,000.00 -
2010 Custom Built Harley Davidson (2010)
2010 Custom Built Harley Davidson This Custom Built Harley Davidson has just been released to sell, it was tied up in an estate matter. The person who commissioned this build passed away before a title was issued. The executor of the estate obtained the title from NC DMV in 2010 and the bike was titled as a 2010 model. The clear title states "specially constructed" and "reconstructed" with 000001 miles. The bike has an 80 cu in engine with belt drive. The carburetor has been rebuilt, gas tank and lines cleaned or replaced, new fuel filter and petcock. A new battery has been recently installed. Paperwork indicates a 2003 Super Stock crankcase, and a 2004 Super Stock transmission case, and an FLHT engine. The bike was assembled on a 2003 Rigid Wide Tire Frame. The paperwork indicates the build was commissioned in 2005 and cost $8,814 using the owner's parts. The bike does not have an odometer so mileage is unknown. The previous owner obviously did not ride it often as it was not titled and had no plates. After the executor got the bike titled, plates were issued and I drove the bike about 5 miles or so, once a month to keep the battery up and the fuel fresh.2013-10-02 10:39:13Fayetteville, North Carolina, US1002,203.78 -
2007 RPM custom Chopper (FLYING PURPLE MOTHERSUCKER) (2007)
2007 rpm custom chopper (FLYING PURPLE MOTHERSUCKER) featured in Barnett's magazine in 2007. This is a high end custom built chopper with a 120 inch ultima el bruto engine and a slick shift 5 speed tranny with a BDL 31/2 inch top fuel open primary and a chain final drive. It has a custom paint job done by the famous Justine Barnes from the American chopper series on TV.2013-10-02 02:14:47Jacksonville, North Carolina, US1,28025,000.00 -
2006 Saxon Chopper for sale. (2006)
Saxon Firestorm hot rod pro-street, excellent handling and peerless performance in a package that will turn heads at every corner. The Firestorm is a powerful long and low pro-street chopper. It is raked out at 45 degree and dropped for those who prefer an aggressive hot rod look.2013-09-27 00:00:29Fayetteville, North Carolina, US4,40013,000.00 -
ONE OF A KIND!!!! 2004 Big Mike Choppers Custom "Hooligan" Hardtail (2004)
I am the third owner of this rare BMC "Hooligan" hard tail chopper, which has 9,046 miles and a custom paint job. I bought this bike from it's second owner who was a private seller in North Carolina. This bike has been garage kept & has never been dropped. The one of a kind custom paint job is black with blue & white lighting strikes. The wheels are chrome stainless steel. A brand new 240 rear tire and bearings were put on in April 2013.2013-09-05 08:42:03Apex, North Carolina, US9,0466,500.00 -
2013 custom chopper "Fatvo" (2013)
2013 Custom built chopper. The frame is a "Wrench" 4 up hardtail with a 250 rear wheel. The frame has a integrated oil tank and rear fender with a 21" front wheel and chrome springer front end. Jesse James gas tank with a springer seat. The motor is a "Fatvo", twin cam top end and evo bottom end. The heads were sent to P.A. to be worked. Bike runs strong. The bike is a one off custom with lots of high end parts, S&S carb, primo open primary, accutronix controls etc... no short cuts. Have plenty of pictures let me know if you want more. The bike is for sale locally.2013-10-03 00:52:34Rocky Point, North Carolina, US1,50018,500.00 -
2008 Thunder Mountain Keystone Chopper (2008)
2008 Thunder Mountain Keystone Chopper Tax issues forcing me to liquidate some of my toys. Time to pay the Tax man. My loss is your gain.2013-09-04 07:43:54Charlotte, North Carolina, US2,18815,500.00 -
HOT ROD CHOPPER, BOBBER, CUSTOM MOTORCYCLE, AWESOME (2009)
BEAUTIFUL HOT ROD! CHOPPER. THIS BIKE WAS ORIGINALLY BUILT BY VOODOO CHOPPERS FOR THE 2009 CRAZY HORSE MEMORIAL CHARITY GIVE AWAY TO RAISE MONEY FOR THE MEMORIAL. SINCE THE MEMORIAL GIVEAWAY, THE ORIGINAL OWNER ONLY PUT ABOUT 500 MILES ON THIS BIKE AND DECIDED TO SELL IT (HE WAS A SPORT BIKE RIDER). I PURCHASED THE BIKE FROM HIM AND WE TURNED IT INTO THE HOT ROD IT WAS MEANT TO ME. THIS BIKE IS AWESOME FROM THE CUSTOM SHEET METAL, TO ALL OF CUSTOM COMPONENTS, WHICH I CONSIDER TO BE SOME OF THE BEST AVAILABLE ANYWHERE. I SENT THIS BIKE TO T-MAN PERFORMANCE IN NC FOR THE ENGINE AND TRANSMISSION BUILD, AND FOR MOST OF YOU WHO HAVE HEARD OF T-MAN, HE IS ONE OF THE BEST IN THE BUSINESS.2013-09-03 13:05:09Charlotte, North Carolina, US1,5005,001.00 -
2004 Hellbound Hellion Chopper, SOFTAIL, only 5298 miles. Excellent Condition (2004)
Beautiful Hellbound Hellion SOFTAIL chopper with 107 S&S, 6 speed, 3" belt drive primary, kevlar final drive belt, and 250 rear tire. Has a Super Sucker intake (plus stock intake), extra set of baffles, and passenger pegs. Bike has just been serviced and is ready to ride.2013-09-03 11:30:09Holly Springs, North Carolina, US5,29810,500.00 -
Custom Chopper with El Bruto Ultima 113" motor (2004)
113cu in, 240 tire, softail, 6 spd, open primary, chrome front end, high output battery and starter, both compression releases, black primer paint, looks good this way, or ready to paint whatever your paint would be. 700 miles on bike----this took a few years to build piece by piece. Bike is in Charlotte, NC Available to show ---loud pipes2013-09-27 00:28:36Charlotte, North Carolina, US7008,900.00 -
Custom Chopper (2006)
Absolutely one of a kind custom built chopper. Excellent Condition. Less than 1,500 original miles.2013-09-03 09:42:51Matthews, North Carolina, US1,50010,000.00 -
Custom Chopper, revTech Vtwin motor, Harley Davidson motorcycle (2001)
Hello, Up for auction is a 2001 custom chopper, here's what it has: -First off it's an awesome bike!!-3" BDL belt drive-200mm rear tire-hidden horn-Revtech 100 Engine-RevTech Transmission-Hydrolic Clutch-Mikuni carb-K&N filter in a velocity stack-Oil pressure guage-clear title-Obsesively maintained...-No Speedo, so the miles are an estimate This bike is built solid as a rock! Super fast and agile... If you have any questions please ask..2013-09-05 08:25:40Hope Mills, North Carolina, US4,0004,149.99 -
indepentent cycles inc low life playboy bike (2014)
this is on bad chopper, it has the best of everything and built by the best. shannon davidson at the chop shopp put the bike together, gasoline arts the painter for jesse james done all the air brushing. the bike has been rode around for some photos which it has about 14 miles on it.2013-09-03 03:58:52Fayetteville, North Carolina, US1410,000.00 -
CUSTOM CHOPPER MOTORCYCLE 2003 (2003)
2003 CUSTOM MOTORCYCLE CHOPPER BUILT BY LAKE NORMAN V -TWIN 124 S&S POLISHED MOTOR 6 SPEED TRANSMISSION PRO 1 DAYTECH ,SOFT TAIL CHASSIS CAROLINA CUSTOM CHROME WHEELS, 250 REAR TIRE EEL SKIN SEAT, 5400 MILES This bike cost $ 52,000.00 new! Show winner at Bike Shows! This bike not only looks good it rides good, and is definitly a head turner!2013-09-03 03:57:12Mooresville, North Carolina, US5,4005,000.00
Harley-Davidson VRSC Price Analytics
Moto blog
5 Things You Need To Know About The Harley-Davidson Street Glide
Thu, 14 Nov 2024Photo by Francis Jun. Recently, the Motorcycle.com staff had the chance to tour the beautiful Ontario countryside to experience the fall colors and to get a taste of what Northern Ontario has to offer. It’s a stunning place, and we thank our friends at Destination Ontario for making it all possible.
2024 Harley-Davidson Hydra-Glide Revival Review
Tue, 03 Sep 2024A double dose of nostalgia Photos by Edward Narraca; Harley-Davidson Museum Archives I love classic Americana. Hot rods, choppers, you name it. It’s one of the things that make me proud to be from the place that this aesthetic was born.
2024 Harley-Davidson Hydra-Glide Revival Review Gallery
Tue, 03 Sep 20242024 Harley-Davidson Hydra-Glide Revival Review Gallery | Motorcycle.com Join Now My History Account Settings Log out Specs Classifieds Bike Reviews Product Reviews Best Motorcycle Cameras Best Motorcycle Earplugs Best Motorcycle Oil Best Leather Jackets Best Winter Gloves Best Sportbike Tires GPS Buyers Guide Gear Deals Types Adventure Touring Cruiser Electric Off-Road On-Off-Road Other Scooter Sport-Touring Sportbikes Standard Touring Touring Scooter Track Youth Brands Aprilia BMW CFMoto Ducati Energica Gas-Gas Harley-Davidson Honda Husqvarna Indian Kawasaki KTM Kymco Moto Guzzi MV Agusta Piaggio Royal Enfield Suzuki Triumph Vespa Yamaha Zero Resources New Rider's Hub Dealers Safety Forums Videos Insurance Specs Classifieds Bike Reviews Product Reviews Best Motorcycle Cameras Best Motorcycle Earplugs Best Motorcycle Oil Best Leather Jackets Best Winter Gloves Best Sportbike Tires GPS Buyers Guide Gear Deals Types Adventure Touring Cruiser Electric Off-Road On-Off-Road Other Scooter Sport-Touring Sportbikes Standard Touring Touring Scooter Track Youth Brands Aprilia BMW CFMoto Ducati Energica Gas-Gas Harley-Davidson Honda Husqvarna Indian Kawasaki KTM Kymco Moto Guzzi MV Agusta Piaggio Royal Enfield Suzuki Triumph Vespa Yamaha Zero Resources New Rider's Hub Dealers Safety Forums Videos Insurance Join Now My History Account Settings Log out Edit & Post 2024 Harley-Davidson Hydra-Glide Revival Review Gallery The latest addition to Harley-Davidson's Icons collection is actually a nod to two prior motorcycles. The Hydra-Glide name celebrates its 75th anniversary, dating back to the first hydraulic fork that was equipped to a Harley-Davidson, replacing the springer front end in 1949, while the “slash” fuel tank design, emblem, classic round air filter cover, two-toned windshield, seat, and cases, are all nods to the 1956 FLH. Read the full story here.
2024 Harley-Davidson Road Glide and Street Glide Review – First Ride
Thu, 22 Feb 2024New and improved and yet still the same. Everything’s going to plan. Photos: Brian J.
2024 Harley-Davidson CVO Road Glide ST Review – First Ride
Thu, 08 Feb 2024When racing improves the breed Photos by Brian J. Nelson You know the Harley CVO story by now. It starts with the highest-performing production bike The Motor Company can make, and then we see bits and pieces make their way down the standard production line in the years to come.
Hero Motocorp Teases Harley-Davidson-branded Model for India
Wed, 05 Apr 2023An Indian-made air-cooled Single-cylinder Sportster? Harley-Davidson and Hero Motocorp announced a partnership back in 2020 for the distribution of existing Harley motorcycles and the development of a new range of models for the Indian market. We haven’t heard much from that arrangement… until now, when a selection of “spy photos” of a Harley-Davidson-branded motorcycle with a 400-ish cc Single landed in the hands of the Indian press.
Harley-Davidson's New 121ci CVO Engine Has VVT
Thu, 16 Mar 2023Another leaked image reveals more secrets A couple of days ago, we were tipped off by Harley-Davidson blogger Dr. Dan Morel about photos of an alleged new CVO Road Glide and CVO Street Glide taken from the factory floor. Morel has since sent us another photo, offering a clear look at the CVO Road Glide’s right side, including evidence that the new 121ci engine uses variable valve timing.
2023 Harley-Davidson CVO Road Glide and CVO Street Glide Leaked
Tue, 14 Mar 2023CVOs receive 121ci engine, new fairings and inverted forks Harley-Davidson released the bulk of its 2023 lineup about two months ago, but we’re still waiting to here about more models, such as the Custom Vehicle Operations models that will be joining the CVO Road Glide Limited Anniversary. We may not have much longer to wait, as videos of a new CVO Road Glide and CVO Street Glide have popped up on line, revealing some big changes to the CVO models, and perhaps a sign of what to expect for the 2024 lineup. Blogger Dr.
2023 Harley-Davidson X 350 Revealed for China
Fri, 10 Mar 2023H-D/QJ Motor connection finally bears fruit Harley-Davidson has officially revealed the X 350 for the Chinese market, a small displacement flat track-inspired roadster produced with Qianjiang Motor (QJ Motor). As of this writing, the X 350 is only confirmed for China, though a modified variant known as the X350RA will be used in Harley-Davidson Rider Academy programs in the U.S. QJ and Harley-Davidson have been working on the X 350 since 2019, though the motorcycle traces its lineage a little earlier to the TNT300 from QJ-owned Benelli.
Five Takeaways from Harley-Davidson's Q4 2022 Results
Thu, 02 Feb 2023Del Mar delays, Project Fuel and the X350RA Harley-Davidson presented its fourth quarter 2022 financial results, and the results were generally strong, but not without a few hiccups. The quarter was strong, compared to the previous year, with revenues ($1.14 billion vs $1.02 billion), operating income (profit of $4 million vs loss of $7 million) diluted earnings per share ($0.28 versus $0.14) showing increases in 2022. For the year, Harley-Davidson reported revenues of $5.76 billion compared to $5.34 billion in 2021, and an operating income of $909 million compared to $823 million in the previous year.