Ducati Superbike tech info
Ducati Superbike description
This 2012 Ducati 1199 Panigale S - it is quite literally "as new" - is in beautiful condition having been
recently serviced by an ex-Ducati Minneapolis certified tech with
recalls covered by official Ducati dealer Moon Motors, Monticello, Minnesota. It starts and
runs out superbly, just as it should. It is to-near-stock specification
except for its heat-wrapped Termignoni exhaust system, suede seat and
factory "competition" rear-set foot pegs and levers. It has a battery tender hook-up, tender supplied. The vast majority of its 4226 miles were ridden on the street. The bike has been "babied", always garaged and ridden with sanity. Both tires have good life left. The seller has to stop riding motorcycles even though he doesn't want to.
The numbers quoted by Ducati for this S-with-ABS model are: 195 horsepower at 10,750rpm, near 100lb-ft of torque at 9000rpm for a dry weight of 414lb. Think 175mph, 35mpg and zero-to-60mph in 2.98 seconds. And arguably the most handsome motorcycle bodywork of 2012. The Panigale "bolts" the steering head and fork to the engine at the front, the rear suspension to the engine's rear, to provide benchmark handling with its top-of-the-line electronic Ohlins suspension, Brembo radial mono bloc front brakes and Marchesini wheels. Arguably this is one of the finest 2012 Panigale S with ABS available. |
Ducati Superbike for Sale
- 2008 ducati superbike(US $10,450.00)
- 2015 ducati superbike(US $10,500.00)
- 1999 ducati superbike(US $41000)
- 2011 ducati superbike(US $10,600.00)
- 2003 ducati superbike(US $18000)
- 2013 ducati superbike(US $8,200.00)
Moto blog
Ex-Rutter Ducati 888 on eBay
Wed, 09 Jun 2010WANT TO stand out from the crowd on a piece of 90s retro trackday cool?An ex-Michael Rutter 1992 Ducati 888 SPS is up for grabs in eBay, ridden by the man himself in the 1992 season.Imported by Hoss Elm (now there's a name I've not seen for a while) boss of former Ducati UK Importers Moto Cinelli, the bike's fitted with all of the factory Corse parts that were available at the time, including full Termignoni exhaust system, lightweight flywheel, titanium rods, Magnetti Marelli ECU with Eprom race chip.Other stuff:Brembo 320 mm brakes upgraded to machined from solid calipersOhlins supension rebuilt and set-up by Ohlins factory. Ohlins steering damper.Corse close ratio gearbox.Magnesium cases.Marvic mag wheelsMichelin intermediatesFull carbon kevlar bodywork, recently repaintedCarbon Corse tankCarbon Corse wishbone intake system and airbox.Carbon HandlebarsMagnesium yokesCarbon rear discSpares include, complete carbon bodywork set, sprockets, electric start, standard flywheel set, ally selector drum, track stands, plus loads more.It's road registered, too!The downside? It's £25,500, but the seller's open to offers.
Lorenzo Wants to Race at Assen Despite Breaking Collarbone in Three Places
Fri, 28 Jun 2013Jorge Lorenzo underwent two hours of surgery earlier this morning in Barcelona, Spain, to insert eight screws and a titanium plate to secure his fractured collarbone. By the afternoon, the Yamaha rider was back in the Netherlands to prove he is healthy enough to race in tomorrow’s TT Assen. The reigning MotoGP champion broke his collarbone in three places after high-siding in a wet practice session Thursday.
Leo Vince Ducati Multistrada 1200 exhaust
Thu, 15 Dec 2011Leo Vince have released this exhaust and decat kit for the Ducati Multistrada 1200. Rather than just a plain old link pipe to replace the cat, Leo Vince's decat replacement includes a silencer to cut noise. The exhaust can be fitted to the standard cat, or you could fit the stock exhaust to the Leo Vince decat, or run both.
Ducati Superbike by State
| Ducati Superbike by City
| Ducati Superbike by Color
|