Chopper Chopper Motorcycles, page #21

2005 Custom built Captain America Motorcycle. A part of Americana

 Original chopper from 1967. T100. Starts sometimes on 1 kick but usually fires on 4th kick) runs good, geared to cruise @ 60 to 65 mph.  Top speed somewhere around 90 to 95 mph.  No smoke.

ALL AMERICAN CHOPPER 113 S&S WITH S&S CARB, 6 speed Baker transmission, 3 inch open belt drive all still breaded lines 21 inch custom front rim and a custom 18 inch back rim with a 300 rear tire new clutches. This Chopper only has 7,468 miles on it

 Carbureted, gauges are in mirrors, low mileage (3000) New tires 

Rigid frame, hydro-dipped paint job, 300 rear tire, forward controls, 5-speed transmission, belt drive, Ultima frame, motor and transmission. Runs great, nothing is wrong with it to my knowledge

This Hustler is a drop-seat cruiser Softail. The frame features 34 degrees rake in the neck and 3 degrees in the trees giving a total rake of 37 degrees. This is combined with a 3in stretch to create a 93in wheelbase.

rev tech 110 inch motor 6 speed trans spent 20k to build

--- CUSTOM CHOPPER MOTORCYCLE W/ HARLEY DAVIDSON IRONHEAD 1000 ENGINE --- Award winning custom chopper powered by a Harley Davidson Ironhead 1000. A sweet ride that turns heads every time. 1.

2006 BIG BEAR CHOPPER DEVILS ADVOCATE, Pristine condition, a lot of chrome, very low miles, a one of a kind motorcycle. New Battery and carburetor has been service and gas tank cleaned. Bid with confidence teh bike is in perfect condition.

Zacky's Wide Tire Custom Chopper / Pro Street Winner of 2 bike shows! Built in 2007 by Zacky's Custom Rods, award winning custom bike builder. This was custom 100% custom built from the frame up.

2003 Extreme Cycle Design Custom Chopper, 84 cu in V-twin 2 Cyl, 5 speed trans, unknown miles, (less than 2000 miles/ no speedo or odo) Silver w/copper graphics, Jesse James Villan Tank, Exile Sproder Billet Suicide shift, foot clutch, Arizona Performance Machine built 84 cu in V-twin, Joey Purse front end, Leo Deorio Belt Drive, 250x18 Rear tire (fatty!) Oil & Neutral Lights, kick start, Paint by True Color Customs, Henderson CO, 2003 Easy Rider National Show Winner!, Bike has won a number of Trophies at many venues. Over $60k invested.   This chopper looks amazing and runs perfectly.  $14,000 OBO LINK TO PICTURES http://s1222.photobucket.com/albums/dd485/TheRepoExchange/2003%20Custom%20Chopper/

Custom built from the ground up chopper,  Built 2008 Hard tail,All matte black body and frame with a custom springer front end. Jesse James custom tankHarley 96SS motor with open cam shafts, Engine was rebuilt just 3000 miles ago.320 on the rear and Custom mini pipessolo alligator skin seatPerfect amount of positive rake on the front end for a super stable ride without sacrificing the chopper design Everything about this machine is fully custom, beautiful detail small details throughout the whole bike. Definitely one of a kind!!  I will be uploading more pictures in the next day if you have any quesions feel free to email me. The bike is located in San Diego and can be shipped anywhere as long as wining bidder pays for all transport costs. 

2001 Special Construction Soft Tail.  This is an amazing looking and running bike. I'm the 3rd owner of this amazing custom bike built in 2001. This bike.

This bike is simply badass!  It's a fully custom Show Bike that recently took 1st place in its first and only show--the 2013 American Heroes Tribute Car and Motorcycle Show in San Jose.   It has a Paughco Frame, 36" rake, 107cubic inch S&S motor with cams, lifters and bore kit, Air drop Suspension, Ron Simms tank and sheet metal, Arlen Ness running gear, custom paint by Maurice Jasper.

Garage kept and only ridden about 15 times. I bought it brand new and have enjoyed playing with it but it's time for it to go. First and foremost it has a few spots that need some love, all are pictured.

Up for auction a one of a kind custom bike built by Hank Young from Young Choppers and Hot Rods Inc.. See Hank's various clips: http: radical.flat.twin.over-blog.com/article-motorcycles-builders-hank-young-young-choppers-hot-rods-inc-40036020.html https: www.pinterest.com/pin/448882287832399004/ https: www.youngchoppers.com http: www.cycleworld.com/2007/12/17/art-of-the-chopper-hank-young-first-look/ Overall condition of the bike is excellent (shown in pics). Less than 500 miles on it and always kept indoors and humidity controlled.

The ONLY Fitto painted Arlen Ness custom in the world. Fitto is arguably the most famous/best motorcycle artist in the world, today. You can buy chrome, but you CANNOT get art like this!

Registered as a 1971 Pan head. Custom built with a 1957 rigid frame, 1961 4 speed tranny rebuilt with all Andrews gears, Custom formed sportster pipes covered with jet hot(never discolor) $3000.00 springer front end, jay brakes front and back, new S&S carb and only has 4000 miles. Not for the soft at heart or bottom.

Used Big Dog Chopper for sale, only $11,999! Sharp 2004 used Big Dog Ridgeback chopper with 107 cubic inch S&S Super Sidewinder motor, 6 speed transmission, 21 inch chrome front wheel, super fat 250 mm rear tire, custom license plate mount and chrome everywhere! Sold for over $26,000 new, this Big Dog is a steal at only $11,999!

Used Big Dog Pitbull for sale only $10,999! SUPER SHARP! Only 8,615 miles!

2005 Bourget Fat Daddy Beach Cruiser 300 for sale!! Check this out! Top of the line, one of a kind.

Custom Chopper Fire Fighter Edition. This one is a must see! Pictures and videos do this chopper no justice.

Used Big Dog Chopper for sale, only $11,999! Sharp 2004 used Big Dog Ridgeback chopper with 107 cubic inch S&S Super Sidewinder motor, 6 speed transmission, 21 inch chrome front wheel, super fat 250 mm rear tire, custom license plate mount and chrome everywhere! Sold for over $26,000 new, this Big Dog is a steal at only $11,999!

2005 Bourget Fat Daddy Beach Cruiser 300 for sale!! Check this out! Top of the line, one of a kind.

Used 2006 Big Dog K9 for sale with only 2,699 miles! Check this one out! S&S 117 cubic inch motor, Baker 6 speed transmission, 300 rear tire, Vance & Hines Turn Down exhaust, polished wheels, polished controls, Custom Cone air filter and more!

Harley evo motor with over 100 hp.Wiesco high compression pistons, Andrews cams, S&S carb.six speed spyke transmission 3" open BDL belt drive250 fat avon tirehardtail 6"up 6" out, 41 degree rakemid USA 10" over front endmid USA +5 degree trees for correct trailstainless linesP M polished calipers front and rear.west coast choppers front and rear fendershigh end custom paintfast and loud..has a new battery.. I am an Illinois dealer, this is my personal ride, however tax and title fees will be due depending on the state your from.sold as is, please ask all questions and make all inspections before bidding.most importantly ASK YOUR WIFE FIRST.. bid to buy not to look, no excuses..Fair City Motors LLCSandwich il815-570-2584

NO RESERVE.Harley evo motor with over 100 hp.six speed3" open belt drivefat tirehardtailhigh end custom paintfast and loud..I am an Illinois dealer, this is my personal ride, however tax and title fees will be due depending on the state your from.sold as is, please ask all questions and make all inspections before bidding.most importantly ASK YOUR WIFE FIRST.. bid to buy not to look, no excuses..

custom chopper ..moving to canada need to sell fast

AMAZING 2016 CUSTOM BUILT MOTORCYCLE! This awesome build is powered by a 98" R&R Racing motor and can really get you down the highway! It is set in a custom built frame that has been stretched 4" and dropped 2".

***********   SINISTER CHOPPERS - RADIO FLYER   *********** ***********   AWESOME STURGIS BIKE WEEK - KILLER DEAL!!!!!!   *********** ***********   ROLL INTO STURGIS with ONE SICKASS CHOPPER!!!   ***********  Just Reduced $5k - From $45K to $40K Custom built chopper by SINISTER CHOPPERS out of Phonix, Arizona. This is a one of a kind chopper, it has won many awards and been profiled/freature in many bike magazines (Easyriders, Hot Bike, etc...)  and used for bike related advertisements worldwide. Why by a Harley-Davidson when you can own THE baddest chopper around, right on time for the riding season.

Up for auction is a 2013 Ultima Fat Bastard 200.lowered softail custom.Built to give you the true American swagger.Powered by a 88" Evolution Harley Davidson motor with a 5 speed transmission,Custom paint job,tons of chrome,billet forward controls,Vance & Hines short shots,Harley Davidson CV carburetor,Le Pera Silhouette seat.Metzler Marathon tires,Front ME88 80/90-21' & rear is a ME 880-200/50-18"and a Dakota Digital Dash.Included also is the original solo seat & a set of growler pipes.This bike is set up for a solo rider,no rear foot pegs,bracket on frame was ground off.The main issue with this bike is the Ultima wiring harness was not properly installed and needs to be rewired completely.It starts and runs but only has brake lights,no head light no tail light or blinkers,and the dash is not hooked up.The head light and tail light have been hooked up on a switch to work.The head light lens has a crack in the glass but still works,the paint job has several scratches and chips in it on the front fender,rear fender,gas tank & oil bag.So to sum this up All in All this would be a great bike if the wiring harness was be professionally installed.I can answer any other question you might have feel free to ask.Bike is being sold as is condition.Thanks for taking the time to look!     

custom built pro street softail chopper has high compression s&s 113 with auto compression release heads, s&s carb, 6 speed transmission, 3 inch primary drive. bike also has air ride, 240 rear tire. bike does need some tlc has dent in oil tank there are scratches in gas tank and rear fender air compressor little noisy .

Custom choppers from the late Ironworks Motorcycle Co. in Bradenton Florida Model number #29 out of 30 Testa Road with 212 miles.  Custom Yellow paint, 100 CC Revtech engine with less than 212 miles on it!  (Engine Value is $5000 alone big bore Revtech) Original front and rear tires (180/70R16 77H) with custom 2" Aluminum front wheel, and 16" Aluminum rear wheel with 180mm fat tire.  This high-priced custom motorcycles was over $35,000 new in 2000 and has been stored in an A/C climate garage with battery tender its entire life.

  2007 ASPT (assembled from parts) BOBBER Multiple Show Winner (40+/- local trophies)   I'm selling this bike because I was in a near-fatal accident on my other bike over a year and a half ago and I can't ride any longer. It was maintained meticulously and never abused. If not for the accident, it would not be for sale.

Big Bear Athena Chopper. 3000 Original miles, like new, 100 CU inch S&S motor, Baker 6 speed open planatary transmission, 3" belt, chain drive, 300 series rear tire, LED signal lights, chrome, chrome and more chrome. Rides and runs great, fully serviced with synthetic oil and transmission fluid.

Unfinished Custom Ultima 200 Wide Rigid Frame.  Ultima 140 Cubic Inch Black Engine.  Ultima Six Speed Transmission.  Ultima Inverted Wide Glide.  Sixty Spoke Front and Rear Wheels.  All M.S.O'S and Receipts to Title.  The Bike Needs to be Wired, Needs Brake Lines, Front Break Caliper and Coil.  All Parts are New on This Bike.

SCROLL DOWN FOR MANY MORE PHOTOS This one owner Custom Chopper is ready to tear up the road today!  Looking the bike over you will notice that no expense was spared in building this machine!  Featuring an S&S Motor that is sure to impress with its power!  A Primo 3” primary belt drive gets all the power to the rear wheel without worry of slippage or breakage.  The engine fires right up, has tons of power and the down and out exhaust sounds intoxicating.  The transmission shifts smooth and precise. The Inverted front forks along with softail rear end offer considerable comfort while riding!  The 250 Rear Tire, and 21” Front Tire with matching wheels are attention grabbers! The Custom Paint Is something to see in person, the photos don’t do it enough justice….This bike is a must see!  Call us TODAY as our Choppers never last long.  We can assist you with financing and we do accept trades!  We’ll help you anyway we can!

SCROLL DOWN FOR MANY MORE PHOTOS This is a true CUSTOM CHOPPER at a GREAT PRICE!! A Hard Tail Chopper with Custom Molded Rear Fender which houses a 280 FAT REAR TIRE wrapped around an 18” Chrome Wheel. The Chrome Inverted Front End features a 21” Chrome Front Wheel which matches the Rear!

SCROLL DOWN FOR MANY MORE PHOTOS This is a true rider’s machine for a GREAT PRICE!!  With good tires you won’t have to worry about that for quite a while!  The Motor runs Strong and the trans shifts tight.  The 121CI Motor with 650 Cams gives you all the power you will need!  All the Power of the 121CI Motor is pushed through a 3” Open Belt Drive that is all on the right side in order to keep the SHOW SIDE CLEAN!  Edelbrock Big Port Intake, Mikuni Carb and West Coast Air Intake all add a little extra to an already awesome Chopper!  You’ll find matching wheels with a 21” Front Wheel and a 18” Rear Wheel w/ a 12” Lip on the Rear that is wrapped in a 250 Tire.  The rotors are matching as well!  The Custom Red Metal Flake Paint w/ Black Devil Tail Flames looks AMAZING and is an attention grabber!  44 MAG Grips & Risers fit the scheme of the bike and look GREAT!  Just to finish this bike off Red & Blue LED Lights have been added with a wireless remote to control! We can assist you with shipping or pick you up at the Savannah International Airport if you’d like to fly in and ride it back!  Give us a call so we can put a deal together for you! Mileage: Exempt / Unknown Priced at: $11,990 Low Country Customs 912.964.4422  Warranty InformationThis vehicle is being sold as is, where is with no warranty, expressed written or implied.

This bike was built by a senior design engineer that worked with Jesse on Monster Garage. I was told that Jesse helped him build it, but I don't have anything to back that up. The bike was tuned by Kendall Johnson in North Carolina.

I have a 2008 2" up and 2" out cfl that was built by the senior design engineer at petty enterprises. He also worked with Jesse James on Monster Garage when they built the nascar street sweeper. I'm not sure how much Jesse had to do with the build, but I've been told he was there through out the build.

 The goal was to create an extremely clean show winner bike that is also road worthy. Sabbath Cycles of Toronto built the frame and meshed it with , 110incher punched to 140hp. They used their building skills to create a bike that is a show winner yet very comfortable to ride.

2005 getting high frame, 100 ci Altima motor, 5"primary belt, MP brakes, 6-speed tranny, WILL NEGOTIATE. Contact # 518-810-9732

Offered on Ebay right now is a pristine (2005) 200x Eddie Trotter Thunder Cycle Softail, one owner has kept this bike in showroom condition.  This bike has a 113 cu in s & s motor with a 6 speed right side drive transmission and a primo Rivera brute 4 belt drive.  The frame was built at Thunder Cycle with 44 degrees rake, it was built with plus 4 in the downtube and 5 inches in the top tube, it has a drop seat with progressive softail shocks, rear wheel holder, 300 mm Metzler tire.  The front forks are 63 mm inverted with the 21 inch front wheel.  Wheels were built by RC Components.  The Jeffrey Phipps seat was made out in a baby crocodile color is Conjac.  the brakes are Hawg halter 4 piston in chrome.  The bike has 4K miles.  Originally paid $95k. Contact with any questions as this is a unique chance to buy a Trotta bike at half the price.

1976 Kawasaki 900 Kz Custom Built Old School Style Chopper.  All original parts, custom paint on gas tank, runs great just needs new carburetor kit. Has Springer front end, Rigid Frame, Kick Start, Motor was rebuilt in 1999 so unknown miles.  Everything on motorcycle included. Buyer is responsible for all shipping costs. 

You are bidding on a 2006 Hardcore Custom Chopper. Over $30,000 invested. I just ran it through the shop and replaced both tires, battery, all fluids etc.

200 back tire

2003 AMERICAN IRONHORSE TEXAS CHOPPER POLISHED S&S 107 MOTOR S&S SUPER G CARB SPYKE AIR CLEANER SWINGARM FRAME  MATCHING RIMS AND ROTORS METZELER 240/40R18 IN REAR METZELER MH90-21 IN FRONT BLACK WITH SNAKE SKIN GRAPHICS I HAVE OWNED ALOT OF CHOPPERS THIS IS A VERY COMFORTABLE GOOD RIDING MOTORCYCLE 

BEAUTIFUL ONE OF A KIND CUSTOM BUILT IRON HORSE CHOPPER BUILT BY BIKERS DREAM OF ATLANTA CUSTOM FABRICATED SINGLE DOWNTUBE SWINGARM FRAME USING THE ORIGINAL NECK SO NOT TO AFFECT THE TITLE STATUS SPRINGER FRONTEND CUSTOM HEADLIGHTS AIR RIDE FRONT AND REAR BELOW THE TANK HANDLEBARS TANK FABRICATED TO WORK WITH HANDLEBARS 240/40R18 ON REAR 80/90-21 IN FRONT ON METEZELER TIRES CHROME SWINGARM CUSTOM CUT MATCHING RIMS AND ROTORS JB CONTROLS STRUTLESS FULL REAR FENDER WITH FRENCHED IN LIGHT AND PLATE POLISHED S&S 107 WITH PAINTED JUGS SUPER G CARB TWIN VELOCITY STACKS TWO INTO ONE EXHAUST FIVE THOUSAND DOLLAR FIVE INCH OPEN PRIMARY CUSTOM PAINTED PURPLE WITH GHOST FLAMES CUSTOM ONE OF A KIND SHOW STOPPER NOT ANOTHER ONE LIKE IT IT WAS A SIXTY THOUSAND DOLLAR BUILD RESERVE SET AT A FRICTION OF WHAT THE BIKE IS WORTH SO BID TO WIN THANKS FOR LOOKING 

2007 CUSTOM ONE OFF GATOR THEME MOTORCYCLE IT WAS BUILT AS A THEME BIKE FOR DISPLAY IN A RESTAURANT IT STARTS WITH A WAREAGLE DROPSEAT SINGLE DOWN TUBE SWING ARM FRAME STRUTLESS REAR FENDER 280 REAR TIRE INVERTED FRONTEND CUSTOM CUT ALLIGATOR RIMS BY ROWE MACHINE METZELER TIRES FRONT AND REAR LA CHOPPERS V BARS PM CONTROLS MOTOR IS A  POLISHED ULTIMA 135 EL BRUTO S&S SUPER G CARB HI 4 IGNITION WITH SPYKE COILS SPYKE 2.4 STARTER BDL OPEN PRIMARY CUSTOM CUT SPYKE 6 SPEED TRANNY EXILE REAR BRAKE SYSTEM SPOCKET REAVE CUSTOM DRAG CHAIN CUSTOM PAINT AND AIRBRUSHING BY TERRI LENN PICTURES DO NOT DO THE BIKE JUSTICE HIGH END BUILT 

2005 CUSTOM CHOPPER POLISHED 107 S&S OPEN BELT DRIVE 5 SPEED TRANS SWINGARM FRAME 240 REAR TIRE PULLEY AND BRAKE ON SAME SIDE LOOKS AND RUNS GREAT

Titled 2000 SPCN from the 113 S&S Evo. Build completed in 2008 by my Uncle. I've had the bike the last 2 years and now don't have time to ride it anymore.

2007 VERY DARK GREEN CHOPPER, SOFT TAIL, POLISHED 110 REVTEC,  BAKER 6 SPEED RIGHT SIDE DRIVE  , 3 INCH BDL OPEN PRIMARY,  CUSTOM DECO AIR CLEANER  , VERY COMFORTABLE ACTUALLY  TO RIDE LONG DISTANCE ,  RARE WITH CHOPPERS.  BARLEY RIDIN AND IN GREAT SHAPE ,CUSTOM EVERYTHING SHOW BIKE REALLY,.   STRETCHED AND LONG BUT FITS A 5'8" ME JUST FINE,AND IS ADJUSTABLE FOR A TALLER GUY.

2004 Ironworks Custom Chopper from Orlando, Fl.  Approx 10,000 miles.  1600 cc RevTech engine.

2006 Swift Bar Chopper Soft tail This bike was manufactured by Swift Motorcycles.. Not a custom build. It has a New York title. It has a S&S 117 with six speed tranny.300 series rear tire. With 4058 original miles.

2009 Custom Harley Davidson chopper, built for the sturgist motorcycle club.The bike has 200 miles on it, runs great. Really nice bike. The bike is in mint condition, no scratches, has been stored in my garageNeeds to go, I no longer ride Please email me with any questions

 2002 titled as a Harley replica, 100 cubic inch Revtech motor,  Paughco frame, primo  3"  belt drive, 2 over springer front end, House of Color paint, 21' front spoke wheel, 16" rear spoke wheel. custom seat, new battery, new electronic ignition, new rear brakes, gentleman ape hanger handle  bars. this bike does have some blemishes and has been rode but they are very minor.  This bike has won a 1st place  trophy in a custom builders category.

06 custom chopper ,100ci Rev Tech,Rev Tech 6 speed trans, DNA springer front ,250 rear tire, leaf spring soft tail rear suspension, custom paint job, beach comber bars, custom oil bag, frame powder coated to match paint, custom made exhaust, looks,rides and sounds great. This is a one of a kind custom. This chopper was featured in Barnetts magazine in Jan 09.

2005 VENGEANCE VENDETTA - CHOPPER PROSTREET - SOFT TAIL - S&S 113 - DAUL INTAKE - 250 REAR - NEW REAR TIRE - CLEAN - POLISHED - NO RUST - LIKE NEW

  2005 CUSTOM BMC “BIG DADDYâ€� READY FOR THE ROAD!!! Bike Rally Season is HERE! DON’T BE LEFT OUT!