Custom HD Forty Eight XL1200X 7200 miles

Reserve is $1000


Please text me if you have any further questions (Serious Buyers)


Invested about $10k+ just in parts


Performance Enhancement:

1. Vance & Hines (short shots ) Exhaust.

2. Power Commander-V (Dyno Tuned ) 84.5hp Torque=84

3. XLFLOW-C K&N Screamin Eagle Air Cleaner

4. Black Rocker Arm Cover

5. 4.5 gallon fuel tank with vivid black paint. 

6. Changed all aluminum screws to black screws


Custom Bike Dynamics:

1. Progressive front Springs + front fork lowering kit

2. Progressive 444-4049B 13" BLK Rear shocks + Shock Risers.

3. Le Pera Daytona seat (Pleated Seating).

4. Wide tire kit, which involves 18x5.5 Custom wide wheel powder coated and mounted with Metzeler ME880 Marathon 200/50R18 Rear Tire, axle, swing arm, pully, spacers - Possible to install 240mm wide tire.

5. Custom designed fender for rear tire

6. 2" LA Choppers Extension Risers for front handle 

7. Harley Davidson Narrow Band Billet Hand Grips (56443-00A)

8. Coil & Key relocation and Tank 2-1/2 inch lift kit

9. Harley Drag handlebars

10. Ram - X phone holder (optional)


Steering, cornering and ground clearance and dynamics have been completely optimized. Bike handles much better in slow sharp turns and high speeds. Since the ground clearance is increased, there is no rubbing against the speed breakers.


Custom Looks:

0. Roland sands Derby cover

1. Headlight grill Cover

2. Custom battery cover

3. Custom oil cover

4. Red rear light covers

5. Harley Diamond Black Footpegs (50113-10)

6. Roland Sands fuel cap cover

7. License plate relocating kit

8. Extremely Rare 1982 Round Harley Davidson Bar & Shield Decal/Sticker 

9. Switch provision for any additional lighting, phone charger, etc.

10. Cleaned up wiring


Additional Items that will come along with the bike.

1. Dyno tuned chart.



SPECIFICATIONS


2012 Harley-Davidson Sportster Forty Eight

Dimensions:

Length 88.6 in. (2250 mm)

Overall Width 32.7 in. (831 mm)

Overall Height 42.0 in. (1067 mm)

Seat Height:

-- Laden2 26.0 in. (660 mm)

-- Unladen 26.8 in. (681 mm)

Ground Clearance 3.9 in. (99 mm)

Rake (steering head) 30°

Fork Angle 30°

Trail 4.2 in. (107 mm)

Wheelbase 59.8 in. (1519 mm)

Tires (Michelin® Scorcher® "31" front and rear):

-- Front -- Scorcher® "31" 130/90B16 73H

-- Rear -- Scorcher® "31" 150/80B16 77H

Fuel Capacity 2.1 gal. (7.9 L) (warning light at approximately 0.65 gal.)

Oil Capacity (w/filter) 2.8 qts. (2.6 L)

Transmission Capacity 1.0 qt. (.95 L)


Engine:

Air-cooled, Evolution®

Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder

Bore x Stroke 3.5 in. x 3.812 in. (88.9 mm x 96.8 mm)

Displacement 73.3 cu. in. (1200 cc)

Compression Ratio 9.7:1

Fuel System3 Electronic Sequential Port Fuel Injection (ESPFI)

Air Cleaner Paper cartridge type

Lubrication System Dry-sump

Drivetrain

Primary Drive Chain, 57/38 ratio

Final Drive Belt, 68/29 ratio

Clutch Multi-plate, wet

Transmission 5-speed

Black Steel Laced

-- Front 16 in. x 3 in. (406 mm x 76 mm)

-- Rear 16 in. x 5.5 in. (406 mm x 140 mm)

Brakes:

-- Caliper Type Dual-piston front, single-piston rear

-- Rotor Type (diameter x width): Patented, uniform expansion rotors

-- Front 11.5 in. x .2 in. (292.1 mm x 5.1 mm)

-- Rear 10.24 in. x .28 in. (260.1 mm x 7.1 mm)


Suspension Travel:

-- Front Wheel 3.62 in. (92 mm)

-- Rear Wheel 1.63 in. (41 mm)


Fuel Economy

(EPA urban/highway test) 48 mpg (4.9 L/100 km)


I also have most of stock parts, Bike has a personality and runs awesome. Always parked in the garage. The original peanut tank is not available but it's available online.