Bultaco All Motorcycles

Up for auction is a 1971 Bultaco Matador 250cc enduro motorcycle. I purchased this bike in a package deal with a few other motorcycles. There is no title for this bike, a bill of sale will be provided to the winning bidder.

1977 Bultaco Sherpat model 183 trials bike runs and rides as it should. Payment do in seven days email with questions or text or call 585 590 9090. Thanks for looking.

1979 Bultaco MK 11   370 cc Frontera.     Stored in a heated Museum.  Runs and Looks Fantastic   560 miles.

1965  Sammy Miller Design  Sherpa T 250  M-10   The first Sherpa  T   designed and built by world Champion Sammy Miller.   Stored in a heated Museum. 100 % original including the handlebars with the welded perches, speedometr, lights....

1969 Bultaco 250 Sherpa T Not currently running, been in storage for many years Engine has compression Number match - 4901684 Original VDO speedo shows 834 miles   NO TITLE Pictures sell! Auctiva Free Image Hosting. Auctiva, THE simple solution for eBay sellers.

Bultaco motorcycle. Not running.  Has been parked in garage for several years.Plastic is cracked.

RUNNING BIKE, DOES EVERYTHING IT IS SUPPOSED TO DO.   HAS BEEN GETTING ALITTLE HARD TO START BUT ONCE STARTED RUNS OUT WELL.. ,,,,,,,,,,,,,, IDLE IS GETTING ABIT DODGEY SO CRANK SEALS ARE IN THE FUTURE.,,,,,,,,,,,,,  NICE THING ABOUT THOSE IS THEY CAN BE CHANGED WITHOUT BREAKING THE CASES.   RECENT PRIMARY CHAIN ..........   KEY FOR TOOLBOX,,, ******TITLE,,,,,,,,,, GREAT BIKE FOR A RESTORATION;  VERY ORIGINAL & UNFUTTERED WITH...  STORAGE FOR A REASONABLE PERIOD IS FINE , PAYMENT VIA CASH OR POSTAL MONEY ORDERS ONLY

Here is a happy specimen of a twin shocks old school trials bike. A 1980 Bultaco 350 cc Sherpa-T with matching numbers and in quite good condition. I think the bike has seen its share of usage but was lucky enough to have caring owners.

Show condition with new $1,200 tank. New exhaust and seat too.  Text for questions- 941-275-0206

RUBBER Bultaco Sherpa handguards, frontera, Pursang, alpina, lobito... WE HAVE NEW PARTS FOR THIS BIKE BULTACO SPARK. We have over 4000 motorcycle parts SPANISH.

This tank is in very good condition. The paint is pretty faded.  And there is some duct tape residue where someone taped the seat back together.

The Buzzard continues to try and offer parts for bikes the others either don't have or don't care about! A new set of REAR Wheel bearings to fit most of the Bultaco models with drum brakes 1967-81.....you will get one set - enough to do one wheel...I also offer all kinds of other Bultaco & Vintage Bike Stuff...... shipping in the USA will be $3 - other Countries would be $8 thru the USA Mail Unlike Others - the Buzzard DOES consider himself an Expert in this area after working on Motorcycles / ATV's / Snowmobiles / Watercraft since the early 1970's - and his opinions are based on years of Professional and personal knowledge of what happens in Real World Use - so PLEASE Contact me with any questions you may have!....

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. Hub had some corrosion.

BULTACO FRONTERA, ALPINA, MATADOR, SHERPA, LOBITO, speedometerSOPORTE METALICO chrome speedometer FOR CON GOMA, 80 mm in diameter.IS NEW, OF VERY GOOD QUALITY !!! We have new and used parts Bultaco OSSA Montesa, Ducati, ETC ...SHIPPING SHIPPING share several pieces, cheaper with several pieces in one package !!!!!!Spanish specialists as BULTACO, MONTESA, OSSA, Mototrans Ducati, Vespa MADRID, trademark Lambretta Eibar. OUR EBAY STORE IS: http://stores.shop.ebay.com/cienmotos MOTOR BIKE IS A DEDICATED TO THE SECTOR OF MOTORCYCLE PARTS COMPANY AND SPANISH CLASSIC 1986 !!!!!

 Bultaco Exhaust Gasket...square...new   NOS OEM.  49mm diameter.  Old dealer stock.  I believe the part # is 11-17-001.  Kindly check photos.

Bultaco Alpina frame/swing arm 1973 250    I take PayPal  or a check (which would have to clear first.) Bid with confidence by checking my feedback out just click on the # next to kev_uk_usa

Description: Rusty but solid. Not sure of year. Pictures are part of the description please look at them closely and if you have questions or need more pics, let me know.

I have not used or tested this tank, Has been on the shelf as a display , seems to have been sealed. looks good inside has a cap and petcock, Fixed shipping in lower 48 states is 20.00

Please Click Here to See My Other Items! Up for Bids is a 1971 Bultaco Alpina 250 Crankshaft Crank Shaft   Shipping is $12.99 in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

Part #  81-21-217.  Good condition.  Markings Femsa RSA1X-7.Kindly check photos.

Please Click Here to See My Other Items! Up for Bids is a 1967-1970 Bultaco Matador MK3 250 Crankshaft Crank Shaft   Shipping is $12.99 in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

Please Click Here to Check out My Other Items Up For your consideration is a 1972 Bultaco Alpina 350 AHRMA Vintage Front Axle Bolt All Parts were removed from 1972 Bultaco Alpina 350 AHRMA Vintage Frame #9900718 I am not a Bultaaco expert and can not guarantee all these parts to be original to this bike. Shipping in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

 BULTACO SHERPA, PURSANG, METRALLA, MATADOR, ALPINA, FRONTERA, LOBITO, KICK START STRAIGHT IS NEW, PERFECT. WE HAVE ALL KINDS OF SPARE PARTS FOR SPANISH MOTO BULTACO, MONTESA, OSSA, we specialize SPANISH motorcycle brands. WE SHIP WORLDWIDE.

BULTACO CAMPERA MK2 175  FOR PARTS OR REBUILD, BILL OF SALE, SOLD AS IS. 1969-72 M2800300

LIGHTHOUSE FOR BULTACO SHERPA, LOBITO, ALPINA, MATADOR, ETC ... IS BRAND NEW, WITH CHROME bangs. WE HAVE MORE THAN 5000 PARTS FOR SPANISH BRANDS MOTO BULTACO, MONTESA, OSSA, Merlin ...

Up for auction are 4 vintage handlebars. Most likely from a Maico but could be from an AJS or Husky. I'm selling altogether because it's somewhat of a pain to find boxes to ship.

NEW REAR FENDER BULTACO IN PERFECT COSMETIC CONDITIONS ALUMINIUM POLISH SAME TO MIRROW. THIS AUCTION ITS ONLY FOR THE REAR FENDER, IF YOU LOOKING THE FRONT FENDER PLS CHEEK IN MY STORE. MODELS BULTACO: ALPINA, AGRICULTURA, JUNIOR, SHERPA,LOBITO,PURSANG,MATADOR, CAMPERA,  PLS IF YOU NEED MORE PARTS FOR YOUR BIKE PLS VISIT MY STORE OR LET ME KNOW, WE ARE AVAIABLE ALL PRARTS FOR  MONTESA - BULTACO - OSSA MANY MANY PARTS.

Complete decal set collection for a Bultaco Metralla Mk2 includes tank decals, oil and storage tank, "made in spain" for fuel tank ( not shown), Betor decals, Akront decals, Oil stroke cards, Oil cc decals, etc. Some very hard to find. Includes all shown plus the Made in Spain one mentioned.

Sherpa t 250 series 150 owners manual. Printed Spain 1976 Very nice but not perfect . See photos.

This Fiberglass gas tank came off a 1970 bultaco 250 m68 pursing,I am not sure how much it holds,abit more than stock,,has the cap ,both fuel valves,DG sticker,e mail any questions thks.

BULTACO PURSANG, FRONTERA N ALPINA, MATADOR AIR BOX TO CARBURETOR IF YOU NEED ADITIONAL PARTS PLS BELOW MY OTHER AUCTIONS, IF NOT CAN SEE PLS SEND A EMAIL. PLS VISIT MY STORE FOR COMBINED SHIPMTS. VINTAGE CLASSIC BIKES PLS SEND A MESSAGE BY PAYPAL N CONFIRM THE MODEL THAT YOU NEED, PHOTO 1 OR PHOTO 2

This Dunlop tire and 3 more are one I took off when new and are in like new condition.  No dry rot or cracking they have been stored properly for over 40 years. I have 4 total but one I will keep to go on my Bultaco Sammy Miller Replica.

BRAND NEW TAILLIGHT ORIGINAL PILOT BULTACO LOGO FOR ALL ROAD BIKES BULTACO MERCURIO, METRALLA, METRALLA MK2,TRALLA, METRALLA MK2, CAMPERA, ALPINA, ETC. BULBS NOT ARE INCLUIDED !!! YOU CAN FIND OTHERS PARTS BULTACO IN MY STORE: LIGHTS, ELECTRIC PARTS, LEVERS N PEDALS, AIR FILTER ELEMENTS, BODY PARTS, KIT DECALS, SHOCKS, EXHAUST PARTS, SPOKES N NIPPLES,CHAIN GUARD, KIT FENDERS, RUBBER PARTS ALL, ETC ETC.

This is a brand new Wiseco piston. This is listed to fit 125cc Bultaco models. This includes the piston, piston rings, circlips and instruction sheet.

BULTACO SEAT PURSANG MK 7 NEW, WELL MADE WITH EMBEDDED ANAGRAMA BEHIND THE PAINTED IN ALUMINUM. We are specialized in BULTACO MOTORCYCLES AND PARTS, AND OSSA MONTESA. MORE THAN 25 YEARS OF EXPERIENCE IN THE CLASSIC.

I believe it is a MK3 or MK4 Matador tank or possibly Pursang. I got it on an older Matador and since have put correct tank on. No leaks, good threads, very restorable.

BULTACO SHERPA, MATADOR, ALPINA, CHAIN SPROCKET REAR ALUMINIUM ES, DE 52 Z, EARLY MODEL OF BULTACO. MEASURES CM, PLEASE CHECK THE WHEEL BEFORE PURCHASING. WORLDWIDE SHIPPING dispatched to combine With Other elements SEE OUR EBAY STORE: http://stores.shop.ebay.com/cienmotos THANKS FOR YOUR INTEREST.

Please Click Here to Check out My Other Items Up For your consideration is a 1973 Bultaco Alpina 350 AHRMA Vintage Engine Crank Case Crankcase All Parts were removed from Engine #JM-11600381 Frame # I am not a bultaco expert and can not guarantee all these parts to be original to this bike. Shipping in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

Used OEM Chain Tensioner.  Kindly check photos.

NOS  OEM.  Only wear is from shelf life.  275mm long..  17mm diameter.14mm thread.  Could fit other models.  Kindly check photos.

You are bidding  on a used clutch cover   for a Bultaco Sherpa T 250.  Looks to be in ok used condition and  has some scratches see pictures.  Comes with everything you see in pictures. Please look at all pictures for more details.  These are used parts and I strive to describe as best of my ability if I miss something it is an honest mistake and will make it right.  Please email me with questions as soon as you can for I am on call for work and can go out of town at any time so I do not get to a PC everyday.   Payment must be received in full within 7 days of the end of the auction unless otherwise agreed upon. Please read entire description and ask any questions before bidding.

SWITCH LIGHTS  BRAND NEW THIS IS USED BULTACO ALL MODELS YEARS 60,70,80,  CLASSIC BIKES BY DIFERENTS AREAS TRIAL, MATADOR, ALPINA, LOBITO,  ROAD. CONDITION IS BRAND NEW IN PERFECT CONDITION.    MONTESA COTA, COTA 74, 123, 172, 247, TEXAS, SCORPION, IMPALA OSSA MAR, EXPLORER, ENDURO BULTACO; SHERPA, LOBITO, ALPINA, METRALLA, TRALLA, MATADOR,

Up for bid is a Volcano head Bultaco Metisse. Frame and motor have matching numbers. Frame B1101133, motor M1101133.

I believe this is a 1968 Bultaco Matador. It is a radical 250cc two-stroke monster. Very fast.

  SHAMROCK CYCLES SOURCE 1975 BULTACO PURSANG MK8 250CC HELLO!  Shamrock Cycle Salvage is proud to present for your bidding pleasure a 1975 Bultaco Pursang 250cc motocross racer. This bike was raced shortly in the 1970s before being stored for many years. Bike has very strong compression but no spark.

THERE IS NO TITLE.  WILL PROVIDE BILL OF SALE. **** THE GOOD,   BIKE STARTS, IDLES, REV'S THRU THE RANGE & THE GEARBOX WORKS AS DESIGNED.  NO FUNNY NOISES....    *** THE BAD ; EVERYTHING ELSE I GUESS  !  ---------------------------------------------------------------------------------------  NO BROKEN FINS , MATCHING NUMBERS, TANK IS IN GOOD SHAPE,,  FORKS ARE STRAIGHT & WORK PROPERLY,,   RIMS LOOK VERY STRAIGHT ,  CHAIN & SPROCKETS ARE NOT WORN DOWN TO A NUB IF THAT MEANS  ANYTHING...  SEAT IS IN GOOD SHAPE & WILL TAKE A RE-COVER,    STORAGE FOR A REASONABLE PERIOD IS FINE.    PICK UP IN PERSON IF IN FLORIDA OVER THE WINTER OR BIKE WEEK..,,,,,HELP WITH SHIPPING IS AVAILABLE FOR BUYER..     PLEASE OBSERVE OUR PAYMENT DETAILS, THANKS   

You are bidding on one 1972 73 BULTACO PURSANG MK6 125 IS IN GOOD SHAPE WILL NEED TO BE GONE THROUGH, kicks freely, please look at all of the photos, bill of sale only, thank you.

1967 MATODOR MK2 MODEL 16 250cc 4-SPEED. It has been totally re-built. Every Seal, Gasket and most Bearings have been re-placed.

1974 Bultaco Alpina runs and looks great. I am weeding out my collection of vintage bikes this bike runs and looks great for the year no damage everything works as it should no disappointments any questions please ask I can assist with shipping I am located in Amherst New Hampshire $300 deposit due immediately at auctions and balance due within five days

there is no title,,  very low miles and the condition of the  bike overall and motor seems to bear that out..  SOUNDS GREAT,,   this bike still has the original femsa battery under the side cover,,   tires are crap,, some rust peppering above the sliders but not bad..  tank is solid    original controls apart from the new throttle cable I made..     even has the oem ( plastic) brake switch for the front brake ..  great bike for a restoration..  looks to have stainless spokes up front with very large gauge spokes in zinc for the rear..   storage for a reasonable period is fine..  pick up in person if your coming to florida for the winter or bike week..   motor starts on a kick or two , settles in to  a easy idle..   gearbox & clutch work as designed..  

GOOD USED CONDITION . ALL FINS ARE GOOD . AS BEST I CAN MEASURE IT IS 83.20 MM BORE    INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

GOOD USED CONDITION .   WHAT IS IN THE PIS IS WHAT IS THERE  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

VINTAGE BULTACO EXHAUST SYSTEM WITH BOLT ON SILENCER. NOT SURE OF YEAR AND MODEL BULTACO THIS WILL FIT. 

GOOD USED CONDITION  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

GOOD USED CONDITION . ALL FINS ARE GOOD    INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

GOOD USED CONDITION  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

For your consideration is a nice used ignition cover from a Bultaco Frontera MK10 model 180. The cover is in good condition overall but does show a small amount of chain rash to the tail of the cover and the back side of the flywheel opening seen in the pictures. There are no cracks, breaks or repairs in the cover.