2006 Bmw R 1200 Gs Dual Sport on 2040-motos

BMW Other tech info

Type:Dual Sport Stock Number:UB0367 Phone:8663510902

Moto blog

Need more from your S1000RR?

BMW has launched an HP Race Power Kit for the S1000 RR costing £2,850 including VAT.For trackday riders and racers, the kit - a new ECU and an Akrapovic exhaust system - increases peak power and torque, while optimising the bike’s engine, braking and power management systems, claim BMW, for short circuit riding and racing.Ayrton Badovini’s 2010 FIM Superstock 1000 championship-winning bike uses the HP Race Power Kit. It can also be found on the Jentin Racing-BMW Motorrad S 1000 RR being raced by Richard Cooper in the British National Superstock championship.• Maximum engine output increased by 4bhp and 6lb.ft to 197bhp (147kW) and 88.5 lb.ft (120 Nm) with power and torque significantly bolstered throughout the key 5000 to 9000 rpm midrange• Once installed, the power mapping for the four engine management riding modes (‘Rain’, ‘Sport’, ‘Race’ and ‘Slick’) is identical and the S 1000 RR delivers the full 197bhp across all four modes• The different modes instead alter the electronic rider aids with the Race ABS reducing input and the Dynamic Traction Control allowing full power at greater lean angles as the modes move from ‘Rain’ through to ‘Slick’• Engine braking on overrun is reduced giving more balanced corner entry• Pit-lane limiter activated when the start button is held down in first gear (actual speed maintained may vary with the bike’s gearing)• Akrapovic titanium and carbon-fibre full exhaust system saves 6.8kg over stock and includes a baffle which allows the exhaust to meet noise regulations in place at some circuits

Provisional 2012 World Superbike Championship Entry List Released

The International Motorcycling Federation has released a preliminary entry list for the 2012 World Superbike Championship. The preliminary list includes 24 entries representing six manufacturers: Aprilia, BMW, Ducati, Honda, Kawasaki and Suzuki. Noticeably absent is Yamaha which announced last summer it would pull out of WSBK racing.

FIM to Revise WSBK Homologation Requirements

The International Motorcycling Federation is considering modifying its homologation requirements for the World Superbike Championship following Bimota‘s somewhat surprising plans to re-enter the series. Under current regulations, manufacturers must produce a minimum number of motorcycles for it to be eligible to compete in the production-based WSBK championship. The official regulations currently require a minimum of 125 units produced for an initial homologation inspection, 500 units produced by June 30 of the current year, 1,000 units by the end of the current year and 2,000 units by the end of the following year.