Find or Sell Motorcycles & Scooters in USA
  • 2024 Custom Built Motorcycles Bobber2024 Custom Built Motorcycles Bobber (2024)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE E-MAIL US FOR A QUOTE  WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD  HOLY GRAIL 26,26 BOARDTRACK RACER 2024 MMW HOLY GRAIL  26,26 BOARDTRACK RACER     .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS . RIGID  ROLLING CHASSIS  SET UP FOR CHAIN    ,MMW SPECED FRAME  ,, LEFT SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   26 INCH   MMW  WHEELS ,YOU CAN  SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR     TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,   ,  RISER,MMW  BARS ,  , KICK STAND,  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2024-06-22 11:57:21
    Thousand Oaks, California, United States
    0
    10,000.00
  • 2024 Custom Built Motorcycles Bobber2024 Custom Built Motorcycles Bobber (2024)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE EMAIL US FOR A QUOTE  WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD ,KNUCKLEHEAD 2024 MMW WISHBONE HOT ROD OG 180 TIRE BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5, 21X 2.15 MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR WHITEWALL    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND, NECK CUPS , RACES  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2024-06-22 09:57:54
    Thousand Oaks, California, United States
    0
    5,500.00
  • 2024 Custom Built Motorcycles Bobber2024 Custom Built Motorcycles Bobber (2024)
    MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2024 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2024 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE deposit is non-refundable 
    2024-06-22 09:02:22
    Thousand Oaks, California, United States
    0
    9,500.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SCHWINN STYLE 23,23     BOARDTRACK RACER WITH HOOP  SPRINGER    SCHWINN STYLE    2016 MMW  SCHWINN  STYLE BOARDTRACK   23'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)23X3.75 , 23X3.75 WIRE   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2016-12-17 04:40:57
    Thousand Oaks, California, United States
    0
    5,700.00
  • 2003 Custom Built Motorcycles Bobber2003 Custom Built Motorcycles Bobber (2003)
    Hello Folks! What you have here is a 2003 Honda Shadow Spirit customized as one "badass midnight bobber". This bike is a beast.
    2016-12-09 04:40:40
    South Lake Tahoe, California, United States
    8
    35000
  • 1991 Custom Built Motorcycles Bobber1991 Custom Built Motorcycles Bobber (1991)
    This build was just completed and road tested.  This started out as a 91 HD FXSTS, everything has been redone to make it a vintage looking bobber.  Have a lot of custom fabrication done to it.
    2016-12-01 04:44:11
    Sun City, California, United States
    0
    26000
  • 2010 Custom Built Motorcycles Bobber2010 Custom Built Motorcycles Bobber (2010)
    DYNO TUNED (WITH DYNO SHEET) ULTIMA EL BRUTO ENGINE I JUST GOT IT OUT OF THE SHOP A FEW DAYS AGO 2500$ WORTH OF WORK DONE IT IS AN ABSOLUTE MONSTER NEW TIRES NEW FORWARD CONTROLS NEW NEW LITHIUM ION BATT AND BATT BOX CARB JUST CLEANED NEW OIL NEW FRONT AND REAR ROTORS NEW CHAIN THIS BIKE HAS NOT EVEN BEEN RIDDEN YET ON THE STREET SINCE BEING BUILT ITS BASICALLY BRAND NEW
    2016-11-03 04:41:37
    San Marcos, California, United States
    10
    34000
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
        MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2016 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2016 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:
    2016-10-11 04:45:24
    Thousand Oaks, California, United States
    0
    7,500.00
  • 1973 Custom Built Motorcycles Bobber1973 Custom Built Motorcycles Bobber (1973)
    Up for grabs is a 1973 ironhead chopper. Over 8.5K Invested in it.  1973 1000/Bored to 1100 Ironhead motor in a 2003 Harley sportster hard tail frame and a springer front end. This is a bad ass one of a kind bike.
    2016-10-06 04:44:17
    Long Beach, California, United States
    1
    6,300.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2016 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 150 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .
    2016-07-19 04:50:22
    Thousand Oaks, California, United States
    0
    3,900.00
  • 1979 Custom Built Motorcycles Bobber1979 Custom Built Motorcycles Bobber (1979)
    ESTATE DEAL, clear california title,been stored for less than a year,the bike was jump started,added fuel,Fired right up,idle fine,drag exhaust has nice sound,New engine was replaced less than 50 miles,owner was building the bike,needs some minor items for completion,battery may need replacing or completed charging,seat has small rip...needs complete servicing and safety check before highway riding,,,being sold as is.Being sold for much less than has been invested into the bike...International buyers are welcome, we will work with all shippers and can provide shipping quotes 
    2016-07-16 04:54:32
    Yuba City, California, United States
    50
    3,500.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    I'm listing this motorcycle for a friend, and storing/showing in our showroom.  Concord Trailer World -Polaris 1124 Caven Way Concord Concord, CA 94520 and/or Concord Garden Equipment 2451 Monument Blvd Concord, CA 94520 925-682-9777 Call and talk to Kevin or Mike  Originally Featured in Easy Rider Magazine in 2007 as well. If it's not painted or powder coated than it's been nickle or brass plated. Every single piece of this motorcycle was meticulously though after and kept up.
    2016-07-01 04:57:37
    Concord, California, United States
    4
    16,990.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
              MALIBU MOTORCYCLE WORKS 818-300-4299 ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 70 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS 1977-2003 SPORTY , OR 1990-2002 BUELL ( NOT BLAST MODELS )  2015  SUPER FUNK   250 SPORTSTER / BUELL BOBBER   RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 40 DEGREE RAKE   ,4  INCH BACK BONE STRETCH, 0 UP STRETCH ,, 250 RIGHT  SIDE DRIVE, ,, , OIL TANK UNDER MOTOR   ,SPRINGER   FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   18X8.5,26X3.5  FAT SPOKES  WHEELS WITH BILLET HUBS    . AVON    FRONT AND REAR TIRE  , REAR FENDER (REAR FENDER SUPPORT ALSO INCLUDED ,)     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,   RAPED APES  BARS,NECK CUPS , RACES , WHEEL SPACERS      NOTE :THE SHEET METAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .
    2016-06-28 04:59:50
    Thousand Oaks, California, United States
    0
    4,800.00
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
     Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.
    2016-06-14 16:00:49
    Petaluma, California, United States
    1
    9,900.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW HOT ROD LEAF SPRING , 200 TIRE BOARDTRACK RACER , WHITEWALLS    HOT ROD BOARDTRACK RACER   2015 MMW  HOT ROD  BOARDTRACK  RACER  200 REAR , 21 FRONT  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 36 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  LEAF SPRING      FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)18X5.5 , 21X 2.15 RED WIRE WHEELS    WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2016-06-14 16:00:25
    Thousand Oaks, California, United States
    0
    5,400.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS EVO , SHOVELHEAD  , PANHEAD MOTORS  2016 MMW OG OLD SCHOOL STOCK TIRE WHITEWALL     RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,LEFT   SIDE DRIVE, ,, ,BARREL OIL TANK  ,SPRINGER    FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16X3.5   ,21X2.15   CHROME   WIRE WHEELS (CHROME ,BLACK , RED AND ORANGE ALSO AVAILABLE).  TIRES  ,  CUSTOM REAR FENDER      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM    STYLE GAS TANK  (SEVERAL TO CHOOSE FROM) ,    CUSTOM  BARS WITH  RISER , WE ALSO HAVE CHROME APES, KICK STAND    NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       .
    2016-06-14 16:00:15
    Thousand Oaks, California, United States
    0
    3,300.00
  • Harley 48 Custom -Pro BuiltHarley 48 Custom -Pro Built (2010)
     Pro-built custom 48 Bobber
    2013-10-23 00:19:09
    Redondo Beach, California, US
    22,000
    1.00
  • Exile fatbob harley night train twin cam Brand NEW buildExile fatbob harley night train twin cam Brand NEW build (2013)
     Exile fatbob harley night train Real exile bike brand new build using a Harley 2001 Night train. has a Harley title so no issue on registering. Brand new bike has less than 700 miles on it since new build.
    2013-10-23 00:17:12
    Los Angeles, California, US
    8,000
    26,000.00
  • L/RSV SANTEE CUSTOM SOFT TAIL REV TECH DRIVETRAIN 2004 1700 miles $25k PERFECTL/RSV SANTEE CUSTOM SOFT TAIL REV TECH DRIVETRAIN 2004 1700 miles $25k PERFECT (2004)
    CLEAN TITLED 2004 CUSTOM ON A SANTEE FRAME. REV TECH 100 MOTOR. BIKE WAS $25000 NEW IN 2004.
    2013-10-22 00:56:16
    El Dorado, California, US
    1,700
    710.00
  • 2012 Custom Built Motorcycle Bobber2012 Custom Built Motorcycle Bobber (2011)
    One of a kind Special Construction Hardtail Old School Bobber - completed 2011. Have tons more pictures here:https://plus.google.com/photos/110483167355382798606/albums/5815749539318629361 Freddies Frames custom frame and springer front end, one off unique design. Paint by Hellbound Custom, Reno Air Race themed bike, with airspeed indicator for speedo.
    2013-10-19 00:38:30
    Riverside, California, US
    50
    15,995.00
  • custom bobbercustom bobber (2012)
    Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.
    2013-10-20 00:01:43
    North Hollywood, California, US
    500
    3,000.00
  • MMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REARMMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REAR (2013)
        MALIBU MOTORCYCLE WORKS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE  PLEASE CALL ME  818-300-4299 OR E-MAIL ME  FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO JUST FINISHED  MMW HOLESHOT NEW SCHOOL BOBBER   2013 MMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REAR   ,    ROLLING CHASSIS LEFT SIDE DRIVE   ,   , , RIGID ,35 DEGREE RAKE  ,2  INCH BACK BONE STRETCH 0 UP STRETCH, BLACK    FRONT END WITH    18X5.5 , 26 FRONT MOTO MAGS      WHEELS WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BLACK ,POLISHED OR CHROME FINISH .) .  BRAND NEW 200 ,26 FRONT TIRE  , 9 INCH WIDE   REAR FENDER , CAN BE SET UP FOR PASSENGERS, INTERNAL STRUTS , , NEW BEARINGS AND WHEEL SPACERS, SPECIAL MMW CUSTOM   GAS TANK ,,  , MMW   BARS    , RISERS , CHROME KICKSTAND WITH HIDDEN SPRING . OIL TANK , MOUNTAIN BIKE SPRING SEAT  NOTE : SHEET METAL HAS NOT BEEN MOUNTED    THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     .
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    6,600.00
  • WEST COAST CHOPPERS OG 4 UP CFL 200 ROLLING CHASSISWEST COAST CHOPPERS OG 4 UP CFL 200 ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA BACK IN STOCK !!! WEST COAST CHOPPERS CFL !!!!
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    6,500.00
  • Custom chopper/bobber RIGID 100 IN MOTOR 6 SPEED TRANSCustom chopper/bobber RIGID 100 IN MOTOR 6 SPEED TRANS (2007)
    CHASSIS DESIGN COMPANY 100 IN ULTIMA MOTOR 6 SPEED TRANS 200 REAR 21 IN FRONT BIKE IS FAST AND HANDLES REALLY GOOD RUNS GREAT 3 IN BDL BIKE HAS REALLY LOW MILES BEEN GARAGED FOR YEARS  
    2013-10-14 00:04:54
    Riverside, California, US
    3,000
    4,550.00
  • BSA CUSTOM SHOW WINNING BOBBER VINTAGE CHOPPER TRIUMPH NORTON HarleyBSA CUSTOM SHOW WINNING BOBBER VINTAGE CHOPPER TRIUMPH NORTON Harley (1968)
     Here for your viewing is my BEAUTIFUL BSA Chopper!  This is an absolutely stunning custom built motorcycle. The engine built by legend brit bike specialist John York is from a 1968 Thunderbolt completely rebuilt, polished, and tuned to perfection!  The bike project was overseen and assembled with "Master Custom" builder Denny Berg in Southern California! The bike has snagged several awards and trophies at every show the most prestigious being "Best Rigid" honors at the Del Mar Concours!
    2013-10-03 22:34:25
    Atascadero, California, US
    1,500
    5,100.00
  • Lucky 7 Choppers - Custom chopper/bobber - 96 S&SLucky 7 Choppers - Custom chopper/bobber - 96 S&S (2007)
    THIS MOTORCYCLE WAS CUSTOM BUILT BY A PROFESSIONAL BUILDER AT LUCKY 7 CHOPPERS, CA. BEAUTIFUL PAINT JOB, 4K INVESTED! FEEL FREE TO STOP BY AND CHECK IT.
    2013-09-28 01:24:35
    La Jolla, California, US
    3,000
    12,666.00
  • 2012 CUSTOM CHOPPER / BOBBER2012 CUSTOM CHOPPER / BOBBER (2012)
    2012 COMPLETE CUSTOM BOBBER 113 S&S MOTOR MOTOR IS BUILT WITH ALL S&S PARTS. S&S SUPER G CARBURETOR ULTIMA 6 SPEED TRANS ULTIMA IGNITION SYSTEM. THE BIKE WAS JUST COMPLETED IN OCTOBER 2012.
    2013-09-27 13:10:55
    Rancho Cucamonga, California, US
    20
    10,900.00
  • MMW OLD SCHOOL OG 200 BOBBER RIGID ROLLING CHASSISMMW OLD SCHOOL OG 200 BOBBER RIGID ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD  2013 MMW OLD SCHOOL OG 200 TIRE BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X8.5 , 21X2.15   MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2013-09-26 23:59:33
    Thousand Oaks, California, US
    0
    3,600.00
  • MMW SUPER MOTO MAG 26,26 BOARDTRACK RACERMMW SUPER MOTO MAG 26,26 BOARDTRACK RACER (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SUPER MOTO MAGS  26,26     BOARDTRACK RACER   .   2013 MMW  SUPER    BOARDTRACK   26'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .
    2013-09-26 22:20:12
    Thousand Oaks, California, US
    0
    6,500.00
  • MMW TRIKE SOFTAIL CHOPPER , HOT ROD STYLEMMW TRIKE SOFTAIL CHOPPER , HOT ROD STYLE (2013)
        MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO AFTER EVERYONE WAS BEGGING ....WE FINALLY DECIDED TO BUILD SOME TRIKES ...SO HERE YOU GO   2013 MMW  TRIKE HOD ROD STYLE  ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,34 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,2 INCH UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,CHROME 41MM  FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X7 VINTAGE   WHEELS RED POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,21 FRONT RED WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTIBLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:
    2013-09-26 22:11:30
    Thousand Oaks, California, US
    0
    6,500.00
  • MMW 23,23 SCHWINN STYLE BOARDTRACK RACERMMW 23,23 SCHWINN STYLE BOARDTRACK RACER (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA  BACK BY POPULAR DEMAND !!!! SET UP FOR BIG TWIN EVO OR TWIN CAM HARLEY OR AFTERMARKET MOTORS ( WE CAN ALSO MAKE THIS FOR SPORTY/ SOME BUELL ) 2013 SCHWINN STYLE   BOARDTRACK RACER  23 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .
    2013-09-25 22:45:24
    Thousand Oaks, California, US
    0
    4,975.00
  • 2012 Bobber bobber Custom 2012 Bobber bobber Custom (2012)
    2012 Bobber bobber, Just built. 113ci S&S motor and much more!
    2013-09-05 07:57:40
    Montclair, CA, US
    0
    18,900.00
  • MMW MALIBU CRUISER 23 FRONT , 20 X 200 REAR ROOKE STYLEMMW MALIBU CRUISER 23 FRONT , 20 X 200 REAR ROOKE STYLE (2013)
        MALIBU MOTORCYCLE WORKS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE  PLEASE CALL ME  818-300-4299 OR E-MAIL ME  FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO JUST FINISHED  MMW MALIBU CRUISER  ( ROOKE STYLE )   2013 MMW  MALIBU CRUISER  23 FRONT  ,20X 200 REAR    ,    ROLLING CHASSIS LEFT SIDE DRIVE   ,   , , RIGID ,  ,2  INCH BACK BONE STRETCH , SPECIAL DOWN STRETCH , GIRDER    FRONT END WITH    AIR SHOCK ,20X7  REAR , 23 FRONT NITRO      WHEELS WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BLACK ,POLISHED OR CHROME FINISH .) .  BRAND NEW 200 ,23 FRONT TIRE  , 9 INCH WIDE   REAR FENDER , , , , NEW BEARINGS AND WHEEL SPACERS, SPECIAL MMW HAND MADE  GAS TANK UNDER SEAT  ,,  , MMW   BARS   , RISERS , BILLET  KICKSTAND WITH HIDDEN SPRING, UNDER TRANNY OIL TANK    THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:
    2013-09-05 20:05:12
    Thousand Oaks, California, US
    0
    8,600.00
  • MMW OG OLD SCHOOL STOCK TIRE WHITEWALL BOBBERMMW OG OLD SCHOOL STOCK TIRE WHITEWALL BOBBER (2013)
    MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS EVO , SHOVELHEAD  , PANHEAD MOTORS  2013 MMW OG OLD SCHOOL STOCK TIRE WHITEWALL     RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,LEFT   SIDE DRIVE, ,, ,BARREL OIL TANK  ,SPRINGER    FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16X3.5   ,21X2.15   CHROME   WIRE WHEELS (CHROME ,BLACK , RED AND ORANGE ALSO AVAILABLE).  TIRES  ,  CUSTOM REAR FENDER      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM    STYLE GAS TANK  (SEVERAL TO CHOOSE FROM) ,    CUSTOM  BARS WITH  RISER , WE ALSO HAVE CHROME APES, KICK STAND    NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       .
    2013-09-26 22:20:08
    Thousand Oaks, California, US
    0
    3,300.00
  • MMW OG HOTROD FAT TIRE WHITEWALL BOBBER ROLLING CHASSIS ,MMW OG HOTROD FAT TIRE WHITEWALL BOBBER ROLLING CHASSIS , (2013)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA OG HOTROD FAT TIRE BOBBER    2013 MMW OG HOTROD FAT TIRE ROLLING CHASSIS,  BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO , SHOVEL HEAD , PAH HEAD  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  CHROME    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 INCH WHEELS FRONT AND REAR WITH VINTAGE STYLE WHITEWALLS , FAT SPOKE  WHEELS WITH BILLET HUBS AND CHROME    SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).    , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, 1.25 BEACH  BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   .
    2013-09-04 16:13:22
    Thousand Oaks, California, US
    0
    4,000.00
  • MMW NEW SCHOOL OG 23 FRONT 200 REAR BOBBER RIGID ROLLING CHASSISMMW NEW SCHOOL OG 23 FRONT 200 REAR BOBBER RIGID ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD ,SPORTSTER AND SOME BUELLS  2013 MMW NEW SCHOOL OG 200 TIRE BOBBER, 23 FRONT     .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,35 DEGREE RAKE   ,2 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  NEW HOOP SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5 , 23X3.5  MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,GIMP  APES BARS ,  , KICK STAND NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2013-09-04 16:13:22
    Thousand Oaks, California, US
    0
    5,900.00
  • MMW FATSO ROLLING CHASSIS , EXILE STYLE FAT FRONT TIREMMW FATSO ROLLING CHASSIS , EXILE STYLE FAT FRONT TIRE (2013)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2013 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 160 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .
    2013-09-26 22:20:14
    Thousand Oaks, California, US
    0
    3,900.00
  • MMW 23,23 SUPER SCHWINN STYLE TRACKER WITH WISHBONE SPRINGER AND WHITEWALLSMMW 23,23 SUPER SCHWINN STYLE TRACKER WITH WISHBONE SPRINGER AND WHITEWALLS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA  BACK BY POPULAR DEMAND !!!! SET UP FOR BIG TWIN EVO OR TWIN CAM HARLEY OR AFTERMARKET MOTORS ( WE CAN ALSO MAKE THIS FOR SPORTY/ SOME BUELL ) 2013 SUPER SCHWINN STYLE   TRACKER 23 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    5,900.00
  • MMW 26,26 HEATHEN SUPER BOARDTRACK RACERMMW 26,26 HEATHEN SUPER BOARDTRACK RACER (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW   26,26 HEATHEN SUPER  BOARDTRACK RACER    .   2013  MMW  26,26 SUPER  BOARDTRACK RACER , 26 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .
    2013-09-26 22:44:53
    Thousand Oaks, California, US
    0
    7,000.00
  • MMW OG FAT TIRE BOBBER ROLLING CHASSIS ,MMW OG FAT TIRE BOBBER ROLLING CHASSIS , (2013)
                MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA OG  FAT TIRE BOBBER    2013 MMW OG  FAT TIRE ROLLING CHASSIS,  BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO , SHOVEL HEAD , PAH HEAD  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  CHROME    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 INCH WHEELS FRONT AND REAR WITH VINTAGE STYLE TIRES , FAT SPOKE  WHEELS WITH BILLET HUBS AND CHROME    SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).    , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, 1  BARS  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   .
    2013-09-04 16:13:21
    Thousand Oaks, California, US
    0
    4,000.00
  • Luck 7 Choppers - Custom chopper/bobber - 96 S&SLuck 7 Choppers - Custom chopper/bobber - 96 S&S (2007)
    THIS MOTORCYCLE WAS CUSTOM BUILT BY A PROFESSIONAL BUILDER AT LUCKY 7 CHOPPERS, CA. BEAUTIFUL PAINT JOB!  FEEL FREE TO STOP BY AND CHECK IT. EVERYTHING WORKS AND RUNS PERFECTLY.
    2013-09-26 23:37:22
    La Jolla, California, US
    3,000
    14,999.00
  • 2012 Harley Rat Rod Bobber2012 Harley Rat Rod Bobber (2012)
     THIS Bobber built for advertisment and promotion af a famous clothing company. " TRUE RELIGION SPRING 2012 - THE REBEL " Check this web site ! http://www.youtube.com/watch?v=kkXdqguDYxU AND IT IS LOUD, FAST, AND FUN TO RIDE.
    2013-09-03 03:57:18
    Gardena, California, US
    500
    8,900.00

Beta All Price Analytics

Moto blog

Webb Wins Salt Lake City EnduroCross

Mon, 13 Oct 2014

From an EnduroCross press release: Factory Beta and Stillwell Performance-backed Cody Webb took a decisive win tonight in Salt Lake City’s inaugural AMA GEICO EnduroCross event. The win was Webb’s second after taking the first round victory in Las Vegas and puts him and his Beta two-stroke 300 into the points lead. The race fans in attendance at the Energy Solutions Arena saw a night go almost perfectly for GEICO-supported Webb.

Photos Of This Weekend’s Denver Endurocross Track

Fri, 03 Oct 2014

This weekend the EnduroCross championship makes its way to Denver and the National Events Center for the fifth round of the nine-round series. Truckloads of dirt, mountains of rock and piles of logs are coming together to create an EnduroCross course that’s sure to challenge racers and entertain fans.  Excitement will be a mile-high this weekend as the EnduroCross Championship puts three different race winners into an epic battle for valuable points before the halfway point in the series. Beta/GEICO-backed Cody Webb has led since his first round victory in Las Vegas, but KTM’s five-time champion Taddy Blazusiak is hot on his heels after a big win at the last round in Atlanta and at X-Games. And don’t count out Colton Haaker.

Skully AR-1 Augmented Reality Helmet Now Ready For Preorder + Video

Mon, 11 Aug 2014

Skully (www.skullysystems.com) today announced the company has begun production of its highly anticipated AR-1 motorcycle helmet, the first vertically integrated smart HUD helmet for consumers. In addition to a revolutionary Heads Up Display system that displays information approximately 10 feet in front of the rider, the AR-1 helmet features a near 180-degree rearview camera, turn-by-turn GPS navigation, smartphone pairing and voice control, making it the world’s smartest motorcycle helmet. The AR-1 was introduced in late 2013 to worldwide acclaim, resulting in more than 100,000 beta tester applications. Skully is taking pre-orders for the AR-1 helmet exclusively on Indiegogo. The 30-day campaign will feature limited time, special pricing on the AR-1 and will be the only opportunity to ensure they will receive early shipping.

2015 Beta Lineup Revealed

Tue, 24 Jun 2014

Beta USA has revealed its 2015 models including updates to its entire four-stroke engine range and minor tweaks to its two-stroke lineup. The biggest changes are smaller displacements for most of the four-stroke lineup and the adoption of features previously offered on the Factory-edition variants. Apart from the engines, the two-stroke and four-stroke Beta RR models receive the same chassis updates.

Saddlemen Launches New Interactive Website

Tue, 17 Jun 2014

Saddlemen, a well-known name in high-quality aftermarket seats, luggage and accessories for all types of motorcycles, announced today the launch of its new and improved website, providing consumers with a more custom and interactive experience. The new Saddlemen website includes the following site enhancements: Improved Navigation: Users can now search for products based on the year, make and model of their motorcycle using the new drop down menu feature, allowing for increased accuracy when shopping for products. Enhanced Technology: The new site is formatted for both mobile and desktop use, whether you’re out on the road or relaxing at home, customers can now shop for their favorite Saddlemen products whenever and wherever they like.

2014 GEICO EnduroCross Series Kicks Off May 2

Tue, 01 Apr 2014

Fans of EnduroCross will be excited to know the 2014 season is set to get underway on May 2. Entering its 11th season of competition, two new venues will be joining the calendar, allowing more people to witness this exciting indoor off-road racing action. If you’re not familiar with it, EnduroCross tracks incorporate various elements of extreme off road racing into a Supercross-style setting, including rocks, boulders, logs, sand, mud, a water-hole…and even a few special obstacles like giant tires thrown in!  Known as the “toughest racing on two wheels,” this indoor off road racing is sometimes described as carnage on two wheels, and will certainly keep you on your feet.

Sway: An All-Electric, Leaning Three-Wheeler – Video

Thu, 16 Jan 2014

Whatever you do, don’t call the Sway an electric version of the Piaggio MP3. While it’s true the Sway does have two forward wheels and one trailing behind, the similarities end there. Oh, and unlike the MP3, the Sway is still in Beta testing.

2040Motos.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Motos User Agreement and Privacy Policy.

0.103 s, 5365 u