Find or Sell Motorcycles & Scooters in USA
  • 2003 Honda CR2003 Honda CR (2003)
    STUNNING 2003 HONDA CR250 R, READY TO RACE Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] 2003 HONDA CR250R A Stunning World Class Full Custom  Looks & Runs Much Better Than New Purpose Built Machine The Pinnacle of Two Stroke Development Over $7,900,00 Invested In Full Build; 36 Hours Shop Labor Plus Parts  Frame Up Build Pro Polished Aluminum Frame Pro Polished Aluminum Swingarm Compression Tests Perfect at 215 PSI  Pro Polished Engine Covers New Cylinder New Piston & Rings Crank Rebuilt All New Gaskets & Seals VP T2 Non-Ethanol Fuel New Twin Air Filter  New Keihin Air Striker Carb Moto Tassinari V-Force III Reed Valve  Replacement OEM Power Valve Servo Motor RC Valve Rebuilt New FMF Gold Series Exhaust  New Polished FMF Silencer New Hinson Clutch Basket New Barnett Clutch Plates and Springs Kit New Boyesen Factory Racing Clutch Cover New Spark Plug New Spectro 10w40 Gearbox Oil New Engine Coolant New Head & Cylinder Nuts New Engine Hard Ware Pro Polished Aluminum Ignition Cover New Pro-Taper Sport Shifter  Custom Aluminum Radiators New GPI Radiator Hoses New Engine Coolant New Gear Lube New Brake Fluid Black Rims With Red Hubs Silver Spokes With Red Spoke Nipples New Hoosier 80/100/21 Front Tire & Tube New Front Rotor New Hoosier 110/90/19 Rear Tire & Tube  New Vortex Sprocket New Sprocket Mount Bolts New 520 Gold Heavy Duty Final Drive Chain Full TM Design Works Red Factory Kit  TM Design Works Red Factory  Chain Guide TM Design Works Red Factory  Chain Rollers TM Design Works Red Factory Chain Slider New Full Custom Staiger Designs Graphics Kit  Limited Edition (1 of 1 Made) #94 New Front Number Plate New Front Fender New Radiator Shrouds New Side Number Plates New Rear Fender New Seat Cover New Fork Guards  New Shock Guard Mud Flap New White Radiator Louvers New Renthal Twinwall RC High Handlebars New ODI Black Grips  New Whirlpool Throttle New OEM Honda Brake Lever  New Quick Adjust Clutch Perch & Lever  New Hardware  Custom Drilled Washers Factory Connection Suspension  Braided Stainless Brake LineAnodized Red Brake ClevisBlack Hammer Head Rear Brake Lever With Red TipAnodized Red Rear Master Cylinder CoverWay to Much To List It All!Less Than 1 Hour Test & Tune Ride Time Since The Build Was CompletedPlease Watch The Video and See The PicturesPlease Call Us With Any QuestionsM-F 9-5 860-454-7024 _________________________________________Sold on Q1 bill of sale. No title is available.
    2024-06-24 16:42:08
    Vernon-Rockville, Connecticut, United States
    100
    4,995.00
  • 2005 Honda CR2005 Honda CR (2005)
    WORLD CLASS NEW 2001 HONDA CR500 ENGINE / 2005 ALUMINUM FRAME CONVERSION Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] 1968 HARLEY-DAVIDSON FLH SHOVEL-HEAD 74 C.I. Video will open in a new window Using the eBay App?
    2024-06-23 22:42:24
    Vernon-Rockville, Connecticut, United States
    100
    10,500.00
  • 1997 Honda CR1997 Honda CR (1997)
    HONDA 1997 CR250R 2 STROKE TIME CAPSULE Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] 1997 Honda CR250R  Absolutely Gorgeous Full Frame-Off Restoration Looks & Runs Factory Fresh  An Iconic Classic Time Capsule  WIZARD BUILT & TUNED  Loaded With Upgrades VERY FAST & STUNNING *PLEASE WATCH THE VIDEO FOR A FULL DESCRIPTION* Just Invested Over $7,940.00 in New Parts & Shop Labor: Very Fast & Compression Tests Strong at 210 PSI  New Nikasil Plated Cylinder New Piston & Rings New O.E.M. Crank Rebuild With New Bearings & Seals New Seals & Gaskets New NGK Spark Plug   New Twin Air Filter New Keihin 38mm PWK Air Stryker Carburetor, Jetted + Tuned New Fuel Line & Carb Vent Lines  New Carb Air Boot Clamps  New Boyesen Reed Valve VP T2 Non-Ethanol Premix Fuel New FMF Gold Series Exhaust New FMF Power Core II Silencer New Spectro 10w40 Transmission Oil  New Engine Ice Coolant  New Water Pump Impeller  New Water Pump Kit  New Clutch Cover Gasket  New Boyesen Factory Racing Ignition Cover  New OEM Flywheel Nut  New Engine Hardware Fastener Kit New Rebuilt Kick Starter Assembly  New DP Front Brake Pads  Vapor Blasted Front Brake Caliper and Bracket  New Rebuilt Front Brake Caliper  New Motul Brake Fluid  New Front Brake Rotor Bolts  New OEM Front Brake Line Guide  New DP Rear Brake Pads  New OEM Rear Brake Caliper Guard  New OEM Rear Disc Guard  New Caliper Guard Bolts  New Regina 520 Gold Final Drive Chain  New Chain Rollers New OEM Chain Adjusters  New 13T Front Sprocket  New 51 Tooth Black Moose Rear Sprocket  New Rear Sprocket Bolts  Removed, Cleaned and Inspected Rear Shock  Painted Rear Shock Spring  New Shock Bushings New OEM Rear Shock Shaft Bumper  New Swing Arm Bearings New Linkage Bearings New OEM Swing Arm Guide/Clip  New OEM Swing Arm Guide  New OEM Hardware New Steering Head Bearings Forks Completely Rebuilt New Fork Seals  New 5wt Fork Oil  New Front Fork Pinch Bolts  New Showa Stickers  New Dunlop D952 Front Tire, Tube, and Rim Band New Dunlop D952 Rear Tire, Tube, and Rim Band New Wheel Bearings New OEM Fuel Tank Strap  New Front Number Plate  New Front Fender  New Side Panels  New Rear Fender  New Throttle Jockey Seat Cover  New Shrouds   New Plastic Hardware Fastener Kit  New Fork Guards  New Pro Taper Shift Lever  New Clutch Lever and Perch  New Clutch Cable  New Front Brake Lever  New Renthal Bars New Renthal Cross Bar Pad  New Odi Hand Grips  New Throttle Housing  New Throttle Tube  New Polished IMS Pro Series Stainless Steel Foot Pegs  New Throttle Jockey Shroud Graphics  New Graphics Kit  Sanded and Prepared Frame  Pro Polished Frame & Swing Arm New Polished Clutch Cover   Showa Dual Chamber Cartridge Fork with Multiple Adjustments  Showa Rear Shock with Pro Link Progressive Linkage Keeps the Power on the Ground   Fully Developed Water-Cooled Design    Factory Nikasil Cylinder Plating for Durability and Light Weight  This Race Bred Classic is Lightest in its Class   Rugged, Great Handling and Fast   Ready to Show, Ride or Race Today    *Call us with any questions 860-454-7024 M-F 9-5*  _________________________________________Sold on Q1 bill of sale.
    2024-06-23 09:41:29
    Vernon-Rockville, Connecticut, United States
    10
    4,250.00
  • 2005 Honda CR2005 Honda CR (2005)
    --------------------------------------------------------------------------------------------------------------------- Please check out our detailed video on this motorcycle:  CLICK THE LINK BELOW & WATCH IT! *May take a second to load if you are on mobile!* _________________________________________________________________ 2005 Honda CR105RB Big Wheel Super-Mini Expert The World’s Finest Honda Super-Mini! An Extremely Rare, Low Hour, Factory Caliber, Fully Custom Bike in Brand New Condition, Frame is in Showroom Condition!
    2016-08-17 04:44:35
    Vernon-Rockville, Connecticut, United States
    0
    3,950.00
  • 1973 Honda CR1973 Honda CR (1973)
    1973 Honda Elsinore CR250M The forefather of modern day motocross! A GREAT Candidate for a full frame-off restoration, TONS of potential! Original “Custom Silver Metallic/Expert Green” paint job is in good condition!
    2016-07-24 04:45:08
    Vernon-Rockville, Connecticut, United States
    0
    6900
  • 1986 Honda CR1986 Honda CR (1986)
    Up For sale is my 1986 CR125. Selling to fund other bikes. Last year a light refresh was done on the bike and it has very little ride time since then.
    2016-06-17 04:48:08
    Thomaston, Connecticut, United States
    1
    1,800.00
  • 2002 HONDA CR 125 2 stroke, This bike is basically brand new2002 HONDA CR 125 2 stroke, This bike is basically brand new (0)
    2 stroke, This bike is basically brand new, I put about $1800 into the bike then broke my ankle an decided its time to retire, It has a brand new wiseco crank and vertex piston, While it was apart I had the cylinder welded and replated, All work was done by chugs motoperformance in Woodbury, Only 0.6 hrs on new motor, - New sprockets and chain - New throttle cables and clutch cables, - New aluminum bearing throttle tube -New clutch plates (all these parts have 0.6hrs on them ) - Hinson clutch basket and pressure plate, - Fastway adjustable footpegs, - sdg tall seat and pro taper fat bars with mounts included, $2500 (203) 598-XXXX Woodbury, CT
    2014-01-23 02:33:41
    Woodbury, CT
    0
    2,500.00
  • (3) 1983 Honda CR 60 (VINTAGE) 3 AVAILABLE(3) 1983 Honda CR 60 (VINTAGE) 3 AVAILABLE (0)
    VINTAGE 1983 Honda CR 60 TERRIFIC CONDITIONRUNS PERFECT - NEEDS NOTHINGSTOCK VINTAGE BIKES (3) AVAILABLE AT $1,000.00 EachCall Chris.
    2014-01-22 04:44:40
    Hartford, CT
    0
    1,000.00
  • 2004 Honda Cr Series 85R 2004 Honda Cr Series 85R (2004)
    2004 Honda Cr Series 85R, Excellent condition many extras FMF pipe, Pro Cicuit silencer, Pro Taper bars, V-Force reeds. Works Connection glide plate and frame guard, Fresh tires $1,350.00
    2013-12-19 21:54:52
    Canterbury, CT
    0
    1,350.00
  • HONDA CR 500 in ALUMINUM FRAMEHONDA CR 500 in ALUMINUM FRAME (2002)
    CUSTOM FABRICATED/CERTIFIED WELDED 2002 HONDA CRF 450 FRAME WITH 1985 CR 500R BOTTOM UP REWORKED MOTOR. (this year motor made 68 hp stock) = 450 killer C CYCLE REWORKED SUSPENSION/PORTED & SQUEEZED/38MM ROUNDSLIDE MIKUNI POWERJET CARB/ FMF PIPE /PRO CIRCUT SILENCER/NEW PLASTICS/SEAT/GRAPHICS/CHAIN/MOTION PRO THROTTLE.WEIGHTED FLYWHEEL (WORKS GREAT IN THE WOODS AND ON THE ICE). WARNING: THIS IS A BIKE FOR AN EXPERIENCED/VET RIDER (could use a top end soon) I reserve right to end auction early due to local listing Reserve is $3,400.
    2013-09-29 13:48:59
    Bristol, Connecticut, US
    999
    1,375.00

Victory V92C Price Analytics

Moto blog

The most powerful Victory

Tue, 23 Feb 2016

Victory, as promised, has introduced the most powerful model in the line of cruisers called Octane. Despite expectations, the bike is practically no different from the previously presented Combustion. At Victory, the novelty is called the modern muscle bike.

Victory has set a release date for Octane

Fri, 08 Jan 2016

The new bike, called the Octane, will feature a 1,200cc liquid-cooled powerplant based on the Indian Scout engine. According to the bold statements of the brand representatives, we are waiting for a motorcycle from the Ducati Diavel league.

Concept Victory Combustion

Sat, 05 Dec 2015

At the New York International Motorcycle Show, Victory unveiled a cruiser powered by the acclaimed Project 156. Like the Ignition concept shown in Milan, the bike is driven by a 60-degree 1200cc V-twin, with a belt-driven final drive.

Victory presented Project 156

Sun, 07 Jun 2015

Victory has teamed up with Roland Sands Design to completely declassify the Project 156, a hand-built race bike for the annual Pikes Peak International Hill Climb. The motorcycle is equipped with a liquid-cooled V-twin, powered by two 67-mm “chokes”, which are supplied with air through an air intake located in a false tank. The fuel tank is located under the engine.

Webb Wins Salt Lake City EnduroCross

Mon, 13 Oct 2014

From an EnduroCross press release: Factory Beta and Stillwell Performance-backed Cody Webb took a decisive win tonight in Salt Lake City’s inaugural AMA GEICO EnduroCross event. The win was Webb’s second after taking the first round victory in Las Vegas and puts him and his Beta two-stroke 300 into the points lead. The race fans in attendance at the Energy Solutions Arena saw a night go almost perfectly for GEICO-supported Webb.

Polaris Slingshot Production Begins

Fri, 10 Oct 2014

Polaris has begun full production of its new Slingshot three-wheeler at the company’s manufacturing facility in Spirit Lake, Iowa. 2015 Polaris Slingshot Review – First Ride/Drive + Video “We continue to introduce new, innovative products and technologies that create opportunities for growth here and around the world. Today, we are excited to celebrate the revolutionary 3-wheel, Polaris Slingshot into full production here in Spirit Lake,” says Bennett Morgan, President and Chief Operating Officer of Polaris.

Photos Of This Weekend’s Denver Endurocross Track

Fri, 03 Oct 2014

This weekend the EnduroCross championship makes its way to Denver and the National Events Center for the fifth round of the nine-round series. Truckloads of dirt, mountains of rock and piles of logs are coming together to create an EnduroCross course that’s sure to challenge racers and entertain fans.  Excitement will be a mile-high this weekend as the EnduroCross Championship puts three different race winners into an epic battle for valuable points before the halfway point in the series. Beta/GEICO-backed Cody Webb has led since his first round victory in Las Vegas, but KTM’s five-time champion Taddy Blazusiak is hot on his heels after a big win at the last round in Atlanta and at X-Games. And don’t count out Colton Haaker.

Josh Hayes Wins Fourth AMA Superbike Title

Thu, 18 Sep 2014

Say what you will about the depleted state of the American roadracing scene, it shouldn’t diminish the fact Hayes put in the effort and beat some formidable challengers to the title. Here, the AMA congratulates Josh Hayes on his accomplishment. Monster Energy Graves Yamaha’s Josh Hayes entered the 2013 AMA Pro SuperBike season on the heels of the most dominant campaign in the history of the series and with his primary threat no longer in the paddock.

NHTSA Launches Recall Look-up by VIN Tool

Fri, 22 Aug 2014

The U.S. Department of Transportation and the National Highway Traffic Safety Administration have launched a new free online tool that should make it easier for consumers to inspect their vehicles’ safety recall histories. The new search tool, available at http://www.safercar.gov/vinlookup, allows people to look for recall campaigns by entering Vehicle Identification Numbers.

Drag Specialties Releases New Harley FXS/FLS and Victory Hammer Seats

Thu, 14 Aug 2014

Drag Specialties, long known for its quality aftermarket parts, has released new seats for two different American motorcycle manufacturers. Harley-Davidson FXS/FLS models now have stylish Predator Seats available for their bike. The solar-reflective leather on the seat surface is claimed to reduce the surface temperature of a sun-baked seat by “as much as 25 degrees.” The sides are constructed of automotive-grade vinyl.