2013 Triumph Tiger Explorer - Phantom Black on 2040-motos

Triumph Tiger tech info

Type:Dual Sport Phone:(888) 352-3358

Moto blog

Watch: 2011 Speed Triple Dyno run

With the full factory fitted arrow system and map fitted it was time to give the Speed a run on a Dyno to see where the power is at. Over two runs the best results were as follows; Power at the crank : 130bhp & 75 ft.lbs torque Power at the gearbox : 124bhp & 72 ft.lbs torque Power at the wheel : 119bhp & 69 ft.lbs torque The bike has covered 4200 miles and is due its first proper service at 6000 so you would expect to see a reduction in power. Triumph claim on a brand new bike the Speed Triple at best puts out 135bhp and 82 ft.lbs torque at the crank with the cans fitted, effectively mine has lost 5bhp and 7ft.lbs of torque.

Natural Habitats

SAM Christmas has been a professional photographer for the last 3 years and is the man behind Natural Habitats, a collection of photos covering the growing UK custom scene, showing bikes and their builders at home.    Sam's clients include the likes of Honda, Dainese, Google, Polo Jeans and Edwin denim but Natural Habitats is a personal project that took one and a half years to complete. I got to meet Sam when the exhibition opened in Shoreditch on Thursday evening.

Twin-Engined Triumph Rocket Streamliner To Challenge Motorcycle Land-Speed Record At Bonneville

The 1,000-horsepower Castrol Rocket is currently undergoing testing for its upcoming assault on the land speed record of 376.156 mph, set in 2010, by Rocky Robinson with the Ack Attack streamliner. The goal: a 400-mph-plus record-breaking run. The 25-foot long x 2-foot wide x 3-foot high streamliner was constructed in cooperation by Hot Rod Conspiracy and Carpenter Racing and will compete in the Division C (Streamlined) – Type V (5) Spark Ignition, Over 2,000cc to 3,000cc class. Powering the Rocket are two heavily modified Triumph Rocket III engines. Each Carpenter Racing built engine was reduced from 2,294cc to 1,485cc (2,970cc total) to meet the 3,000cc maximum total displacement class rule requirement. While piston size remains the same stock 4-inch bore, stroke was reduced from 3.75 inches to 2.4 inches and redline increased from 5,750 rpm to 9,000+ rpm. There’s also one Garrett GT2876R ball bearing, liquid-cooled turbocharger per engine.