Motorcycles in Appleton, Wisconsin

Engine Type V Twin Cylinders 2 Engine Stroke 4-Stroke Cooling Liquid / Air Valves 8 Valves Per Cylinder 4 Valve Configuration SOHC Compression Ratio 9.5:1 Starter Electric Fuel Requirements Regular Fuel Type Gas Transmission: Transmission Type Manual Number Of Speeds 5 Primary Drive (Rear Wheel) Belt Wheels & Tires: Front Tire (Full Spec) 80/90 R21 Rear Tire (Full Spec) 180/70 R15 Brakes: Front Brake Type Hydraulic Disc Rear Brake Type Hydraulic Disc Technical Specifications: Wheelbase (in/mm) 64.8 / 1645.9 Fuel Capacity (gal/l) 5.3 / 20.1

Very, very few visible defects some scratching of blue paint can be seen in pictures I have posted in rear underneath Crome by seat. A couple tiny marks at end of exhaust from removing baffles to get that nice loud exhaust sound and increase overall performance ( normally a $500 upgrade). Blinkers re wired and some grey weld used to keep switch plate in place.

Engine Configuration Inline-4 Compare Inline-4 Motorcycles Combustion Cycle 4-stroke Cooling System Liquid-cooled Valvetrain DOHC 4 valves per cylinder Bore x Stroke 67.0 x 42.5mm Compression Ratio 13.3:1 Power 107 HP @ 14,100 rpm Torque 42.9 ft lb @ 12000rpm Ignition TCBI with digital advance Fuel System DFI?? with four 38mm Keihin throttle bodies, oval sub-throttles, two injectors per throttle body Exhaust lightweight exhaust system Emissions Euro 3 Overall Fuel Mileage 44 mpg City Miles per Gallon 44 mpg Drivetrain SpecsTransmission 6-Speed Clutch slipper type back torque limiting clutch Gear Ratios 1st 2.71 2nd 2.20 3rd 1.85 4th 1.60 5th 1.21 6th 1.30 Primary Drive X-ring chain Final Drive X-Ring Chain

Engine Type V Twin Cylinders 2 Engine Stroke 4-Stroke Cooling Air Valves 8 Valves Per Cylinder 4 Valve Configuration OHV - Pushrod Compression Ratio 9.48:1 Starter Electric Fuel Requirements Regular Fuel Type Gas Transmission: Transmission Type Manual Number Of Speeds 5 Primary Drive (Rear Wheel) Belt Wheels & Tires: Front Tire (Full Spec) 120/70-21 Rear Tire (Full Spec) 210/40-18 Brakes: Front Brake Type Dual Hydraulic Disc Rear Brake Type Hydraulic Disc Technical Specifications: Wheelbase (in/mm) 70.9 / 1800.9 Fuel Capacity (gal/l) 4.1 / 15.5

2012 Yamaha Stryker 1300, copper (orange-ish color), with black factory pipes. About 1400 mi, added floor boards, windshield, backrest and heated hand grips. Excellent condition.

2010 Kymco Xciting 500Ri, Take it for a ride and everything you thought you knew about scooters will disappear. This masterpiece of technology and design features a liquid-cooled 498cc double overhead-camfuel injected engine and flawless CVT automatic transmission. Power enough to carry you and a passenger up to freeway speeds in perfect luxury - all while getting great gas mileage.

2008 SUZUKI Boulevard C90T,

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FEATHERBED FRAME & ENGINE CASES W/ TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1965 Norton Atlas - good, hard to find parts - FRAME & CASES APPEAR SOLID - COME AS SHOWN - TITLED AS 1966 -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $249.99 plus final bid, plus $99 service fee, plus $175 shipping.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME  W/ TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1973 Kawasaki H2 Triple - - FRAME APPEAR STRAIGHT, FRONT HAS SMALL SPOT OF DAMAGE, SEE CLOSE UP- COME AS SHOWN - See pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $750 plus final bid, plus $99 service fee, plus $125 shipping.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: ENGINE CASES W/ TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a very original 1969 Harley Davidson flat side generator Shovel - I believe it was a police bike, many, many hard to find OEM parts - NO REPAIRS NICE CASES - please see pictures for additional details (PLEASE NOTE THE PICTURES COUNT AS MOST OF THE DESCRIPTION, LOOK AT THEM ALL). ***Price is $4,000 OR BEST OFFER, plus $99 service fee, plus $45 shipping fee (fees to be invoiced after item ends). Paperwork is required to complete this transaction to properly transfer title shown.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME & ENGINE CASES (***SEE BELOW FOR TERMS OF SALE) removed from a 1974 Kawasaki H1 500 Triple - nice parts off an original bike with only 7,773 miles - GOOD, SOLID FRAME & CASES -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $550 plus final bid, plus $99 service fee, plus $175 shipping.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME (***SEE BELOW FOR TERMS OF SALE) removed from a 1966 Royal Enfield Continental GT 250 - nice, original parts from 4,781 mile bike - -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $250 plus final bid, plus $99 service fee, plus $100 shipping.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: ENGINE CASES & TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1969 XLCH SPORTSTER MANY OEM RARE PARTS ON THIS ONE - - please see pictures for additional details (PLEASE NOTE THE PICTURES COUNT AS MOST OF THE DESCRIPTION, LOOK AT THEM ALL) ***Price is $499.99 OPENING BID PLUS ADDITIONAL BIDS (TOTAL IS ENDING BID), plus $99 service fee, plus $55 shipping fee (fees to be invoiced after item ends). Paperwork is required to complete this transaction to properly transfer title shown.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: ENGINE CASES (***SEE BELOW FOR TERMS OF SALE) removed from a 1950 Harley Davidson Panhead EL- very nice, OEM Harley parts - wow! AMAZING - GREAT SHAPE, SOLID CASES, VERY NICE -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME (***SEE BELOW FOR TERMS OF SALE) removed from a 1979 Honda CBX - nice, original parts- SOLID, STRAIGHT FRAME -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $599.99 OPENING BID plus additional bids, plus $99 service fee, plus $125 shipping.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME & CASES W/ TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1967 Honda CL77 Scrambler - nice parts - GOOD, SOLID FRAME & CASES - please see pictures for additional details (PLEASE NOTE THE PICTURES COUNT AS MOST OF THE DESCRIPTION, LOOK AT THEM ALL) ***Price is $249.99 OPENING BID plus additional bids, plus $99 service fee, plus $175 shipping. Paperwork is required to complete this transaction to properly transfer title shown.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME & ENGINE CASES removed from a 1971 Harley Davidson XLCH1000 Sportster (***SEE BELOW FOR TERMS OF SALE) - FRAME APPEARS SOLID - CASES HAVE DAMAGE, SEE CLOSE UPS -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $499.99 OPENING BID, PLUS ADDITIONAL BIDS (FINAL BID IS FINAL PRICE), plus $99 service fee, plus $175 shipping fee (fees and balance after deposit to be invoiced after item ends).

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: ENGINE CASES WITH TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1954 AJS MODEL 18S NICE OEM PARTS - GOOD SHAPE NICE CLEAN CASES, TITLE VIN READS 6418S25377 AND COMES AS IS -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $0.01 OPENING BID, plus additional bids (final bid is final price), plus $99 service fee, plus $35 shipping fee (fees and balance after deposit to be invoiced after item ends).

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME & ENGINE CASES W/ TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1978 Kawasaki Z1R - nice, original parts for your restoration - GOOD SHAPE, SOLID FRAME & CASES -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $0.01 OPENING BID, plus additional bids (final bid is final price), plus $99 service fee, plus $175 shipping fee (fees and balance after deposit to be invoiced after item ends).

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: ENGINE CASES WITH TITLE (***SEE BELOW FOR TERMS OF SALE) removed from a 1941 Matchless G3L - OVERALL SOLID CASES - COME AS SHOWN -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $0.01 OPENING BID, plus additional bids (final bid is final price), plus $99 service fee, plus $35 shipping fee (fees and balance after deposit to be invoiced after item ends).

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: NICE FRAME with title (***SEE BELOW FOR TERMS OF SALE) removed from a 1984 RZ350 , NICE PARTS OEM PARTS - GREAT SHAPE NICE CLEAN STRAIGHT -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $4.99 opening bid, plus final bid (final bid in eBay is final price), plus $99 service fee, plus $125 shipping.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME  (***SEE BELOW FOR TERMS OF SALE) removed from a 1969 BSA Rocket 3 - solid frame, see close ups - see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***This item is up for auction (starting bid $0.01) or buy it now ($2,000) buy it now, plus $149 service fee, plus $125 shipping fee within the US, international buyers please request a quote (fees and balance after deposit to be invoiced after item ends).

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME  (***SEE BELOW FOR TERMS OF SALE) removed from a 1968 Norton P11 - some repairs, see close ups, titled as 1969, VIN on title reads 128772S - the frame does not have the "S" stamped so I'm not sure what the S is for - comes as is - see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***This item is up for auction (starting bid $4.99), plus $99 service fee, plus $125 shipping fee within the US, international buyers please request a quote (fees and balance after deposit to be invoiced after item ends).

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale IS MAYBE THE CLEANEST G5 YAMAHA 80 ON THE PLANET, VERY RARE IN THIS SHAPE, PLEASE CHECK OUT ALL PICS THIS THING IS VERY NICE. THERE ARE SOME SCUFFS FROM LONG TERM STORAGE.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME (***SEE BELOW FOR TERMS OF SALE) removed from a 1965 Honda C110 - all parts removed from very clean, original bike with only 719 miles - -see pictures for details (pictures do count for most of the description LOOK AT THEM ALL) Please see pictures for additional details. ***Price is $249.99 plus final bid, plus $99 service fee, plus $75 shipping fee (fees to be invoiced after item ends).

FOR SALE TWO 1988 Honda Riva "RAZZ" Scooters/Mopeds in red. This would make a fun winter project for you or someone. The 1 has only 635mis on it!

Brand new battery installed!Engine Type Horizontal In-line Cylinders 4 Engine Stroke 4-Stroke Cooling Liquid Valves 16 Valves Per Cylinder 4 Valve Configuration DOHC Compression Ratio 12.9:1 Starter Electric Fuel Type Gas Transmission: Transmission Type Manual Number Of Speeds 6 Primary Drive (Rear Wheel) Chain Wheels & Tires: Front Tire (Full Spec) 120/70 ZR17 Rear Tire (Full Spec) 190/55 ZR17 Brakes: Front Brake Type Dual Disc Rear Brake Type Disc Technical Specifications: Wheelbase (in/mm) 55.7 / 1414.8 Fuel Capacity (gal/l) 4.5 / 17

Brand new battery installed!Engine Type Horizontal In-line Cylinders 4 Engine Stroke 4-Stroke Cooling Liquid Valves 16 Valves Per Cylinder 4 Valve Configuration DOHC Compression Ratio 12.9:1 Starter Electric Fuel Type Gas Transmission: Transmission Type Manual Number Of Speeds 6 Primary Drive (Rear Wheel) Chain Wheels & Tires: Front Tire (Full Spec) 120/70 ZR17 Rear Tire (Full Spec) 190/55 ZR17 Brakes: Front Brake Type Dual Disc Rear Brake Type Disc Technical Specifications: Wheelbase (in/mm) 55.7 / 1414.8 Fuel Capacity (gal/l) 4.5 / 17

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: FRAME & ENGINE for 1979 KZ1300 (***SEE BELOW FOR TERMS OF SALE) . Frame and engine case only, sold as is.

1985 HONDA GL1200, 1985 Honda GL1200 Aspencade in silver. This bike is being sold as is, it has 43,459 miles and needs a couple things. We have fully safety inspected the bike and it needs a rt.

2009 KAWASAKI Vulcan 1700 Voyager, Call Steve for details 920-687-7080

Selling my road king. For what I owe the bank. Need gone.

1983 Honda GL1100 Goldwing Gold Wing with Vetter Fairing and Hondaline Saddle Bags. Just over 37,000mis, has been repainted, the emblems were not re-installed nor do the come with the bike, I don't know where they are. Very nice running bike, has been winterized and can be stored for free until spring.

american drive at jameson Sa-weet ride, 2008 Harley Roadglide with 30k for miles. Clean, clean, bike with Screaming Eagle Intake and Exhaust along with Power Commander. Incredible ride on this 96" 6 Gear, along with head turning looks.Metro Motorcycle Inc.1020 American DriveNeenah WI 54956Like us on Facebook for new arrivals and specials.

Relisting due to non paying bidder destingreenwoo-0 block them non paying bidder  We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: A VERY DECENT AND STOCK 1992 GSXR 750 , THE BIKE RUNS GREAT NO STRANGE NOISES OR TRANS PROBLEMS , THE CLUTCH WORKS GREAT ALL ELECTRICS WORK ,NO LEAKS GOOD STRONG CLASSIC SPORT BIKE , THE FRONT BRAKES DO SQUEAK A BIT NOT SURE IF NEED THEY NEED TO BE REPLACED OR JUST FROM SITTING AWHILE , THE BIKE HAS HAD AN OIL CHANGED NEW BATTERY BRAKE FLUID ECT. THE TIRES ARE VERY GOOD , THE COMETICS SHOW OKAY ON THE BIKE THERE ARE SCRATCHES ON IT AS IT DID COME OUT OF LONG TERM STORAGE.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: SELLING A VERY STOCK 1100 SPORTSTER , THE BIKE RUNS GOOD RUNS STRONG ,GOOD TRANS STOP NICELY. THIS SPORTSTER IS PRETTY MUCH BONE STOCK , I WOULD SAY A NEW FRONT TIRE IS NEEDED AND A CHAIN OTHERWISE SHES READY TO CRUISE .LOOK AT PICS FOR DETAILS, TITLE FEES DO APPLY LOCAL PICKUP , WE DO TAKE TRADES -  - Please see pictures for additional details (pictures do count for most of the description).

Engine and exhaust stock. Daylight headlight flasher. Brake light flasher.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: 1999 Harley Davidson XLH1200 Sportster Custom (***SEE BELOW FOR TERMS OF SALE) - Very nice, original running Sportster pretty sure bike is all stock except drag pipes which add a little bit of snap. Stock paint is excellent, runs & drives perfectly - recently serviced by certified Harley Technician.

1972 Honda CB500 Four Cylinder.   This has been my daily driver for a good part of the last seven years.  It has been very reliable.

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: 1973 KAWASAKI Z1 (***SEE BELOW FOR TERMS OF SALE) I TOOK THIS BIKE IN ON CONSINGMENT,THE OWNER DID A RESTORATION ON IT  NOT A PROFESSIONAL RESTORATION BUT LOOKS VERY GOOD. THE PAINT WORK IS NICE, THE BIKE HAS VERY NICE STOCK 1974 Z1 PIPES VERY NICE.

I am selling my 2006 roadliner S 1900cc ** 24,500 mis ** ** Corbin heated seat ** ** Back rest for passenger ** ** new Bridgestone Exdra tires ** ** runs amazing ** ** My asking price is $6500 or best offer ** ** Please call or text Jason @ ** ** I do not have paypal **

2007 YAMAHA Stratoliner, 2007 Yamaha Stratoliner 1900 in blue, excellent shape and loaded with options. Quick release windshield and backrest, fuel injection and more. Call Steve for details 920-687-7080

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: 2004 Harley Davidson XL1200C Sportster Custom (***SEE BELOW FOR TERMS OF SALE) - very nice Sportster - runs, drives & shifts flawlessly. Bike looks good - stock paint.

2002 Honda Cb 919, nice ride thats good to go ,new rear tire ,50% front . custom exhaust ,aftermarket signals. everything works perfectly as it should.

2008 KAWASAKI Vulcan 1600 Nomad, 2008 Kawasaki 1600 Vulcan Nomad in blue/silver. This bike has a 1600cc liquid cooled v-twin with fuel injection and a belt drive. The nomad come nicely equipped with hard sided locking saddlebags, windshield and deluxe passenger backrest and seat.

2008 Kawasaki Vulcan 1600 Nomad , 2008 Kawasaki 1600 Vulcan Nomad in blue/silver. This bike has a 1600cc liquid cooled v-twin with fuel injection and a belt drive. The nomad come nicely equipped with hard sided locking saddlebags, windshield and deluxe passenger backrest and seat.

I am selling my 2005 Harley-Davidson FXSTBI Softail Night Train. It is fuel injected has Vance & Hines pipes (sounds great). The bike has been dynoed and tuned for the exhaust.

Very nice Honda Pacific Coast.  Excellent runner.  With stereo, Clear View windshield, battery tender.

2007 Harley-Davidson Dyna Street Bob, 96 ci. Big bore with compression releases on cylinders. About a 103.

2003 YAMAHA V-Star 650 Custom, 2003 Yamaha V-Star 650 in purple. This bike has a 650cc air cooled v-twin with a shaft drive. Some added options included are a passenger backrest, trigger lock windshield and a windshielp bag.

2003 Yamaha V Star Custom, 2003 Yamaha V-Star 650 in purple. This bike has a 650cc air cooled v-twin with a shaft drive. Some added options included are a passenger backrest, trigger lock windshield and a windshielp bag.

Engine BRP-Rotax, Liquid cooled, four stroke, V-Twin, DPHC, 4 valve per cylinder Capacity 998 Bore x Stroke 97 x 68 mm Compression Ratio 10.8:1 Induction Multi-point EFI with 57 mm diameter throttle bodies Ignition / Starting Electronic ignition with dual output coil / electric Exhaust 2-into-1 with catalytic converter Clutch Wet, multi-plate, manual or electronic operation through a hydraulic piston Max Power 106 hp 79 kW @ 8500 rpm Max Torque 77 lb-ft 104.3 Nm @ 6250 rpm Transmission / Drive Sequential Manual 5-Speed (SM5) with transmission-based reverse / Belt Front Suspension Double A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam Rear Suspension Swing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel. Brakes Foot-actuated, fully integrated hydraulic 3-wheel braking system Front Brakes 260mm discs 4 piston caliper Rear Brakes Single 260mm disc 2 piston caliper Front Tyre 2x 165/65R14 Rear Tyre 225/50R15 Seat Height 737 mm / .29 in Dry-Weight .316 kg / 697 lbs Fuel Capacity 25 Litres / 6.6 gal

Engine Type Parallel Twin Cylinders 2 Engine Stroke 4-Stroke Cooling Liquid Valves 8 Valves Per Cylinder 4 Valve Configuration DOHC Compression Ratio 10.2:1 Starter Electric Fuel Requirements Regular Fuel Type Gas Transmission: Transmission Type Manual Number Of Speeds 6 Primary Drive (Rear Wheel) Chain Wheelbase (in/mm) 62.8 / 1595.1 Fuel Capacity (gal/l) 4 / 15.1

2005 Kawasaki ZZR600, 2005 Kawasaki ZZR600 in blue. This bike has a 600cc liquid cooled inline four with a chain drive. Great 600cc beginner bike, great shape 18,198 miles.

2006 Harley-Davidson Road King Classic , LePera seat, backrest, chrome luggage rack, hwy pegs chrome footrests, Python pipes, lots of chrome engine adds and excellent condition. Garage kept and stored/serviced every winter at HD of Appleton $11,500 obo call Eric at 9202685743

We buy vintage motorcycles, parts and collections! Mach IV Motors Please note: payment is due within three (3) days of auction end Up for sale: A very nice original KZ1300 (***SEE BELOW FOR TERMS OF SALE) . The bike runs and rides great, all items work: charging sytem, lighting, brakes, cooling system - all good.  The bike had an upgade on the coils, accel 2 ohm, other then that she is stock.  The paint is very good as is the seat, chrome all over is very nice.  This one is a straight unmolested KZ1300.

2010 Yamaha YZF-R6, 2010 Yamaha YZF-R6 in Raven. This bike has a 600cc liquid cooled inline four with fuel injection and loads of features. This one is like new with only 16 miles!!!

2010 YAMAHA YZF-R6, Like new 2010 Yamaha YZF-R6 in raven. This bike is like brand new with less than 20 miles and still under Yamaha warranty!! Call Steve for details 920-687-7080

2006 KAWASAKI Vulcan 900 Classic,

2010 YAMAHA YZF-R6, Like new 2010 Yamaha YZF-R6 in raven. This bike is like brand new with less than 20 miles and still under Yamaha warranty!! Call Steve for details 920-687-7080