Motorcycles in Iron City, Tennessee

Set of 2 complete single wire front blinkers for Hodaka Wombat Road Toad Squirt etc Nothing broke and pretty much as good of used condition as you will ever find I have no way to test and see if the lights work properly Sold as is with no guarantees But you will not find any used ones in this good of condition Please look carefully at pics and make sure you need these. If you need more pictures or information please email me

Complete assembly bolt on Good used condition. No rust Air boot has a couple of cracks showing in pictures There is a few ding’s showing in pictures Mounting bracket is included The original air filter is there but is basically powder the foam is completely dry rotted These air boxes are getting hard to find Please email me any questions

Look closely at pictures for all measurements the width is between 31 1/2” and 31 3/4” There is surface rust you can see it’s not deep pitted rust These bars are bent I think on throttle side they can be bent back. These came from a lot of Hodaka parts I’m pretty no not totally sure it’s off a Ace 93 93a 94 ?? but look at pictures and make double sure before buying I can’t say for sure what model but they are Hodaka Please email me any questions or concerns you may have

Look closely at pictures for all measurements the width is between 31 1/2” and 31 3/4” There is surface rust you can see it’s not deep pitted rust There is a very very slight bend and cannot tell which side it really not much These came from a lot of Hodaka parts I’m pretty no not totally sure it’s off a Ace 93 93a but look at pictures and make double sure before buying Please email me any questions or concerns you may have

This is a new NOS control shaft ball receiver part # 904615 -fits many years and models of Hodaka. You will get 1 brand new ball receiver.These are original OEM and could have light tarnish on them due to the type of metal but are perfect condition. Check part # for your application and make sure of fitment.

This is a new NOS sprocket lock washer part # 904611--fits many years and models of Hodaka. You will get 1 brand new washer.These are original OEM and could have light tarnish on them due to the type of metal but are perfect condition. Check part # for your application and make sure of fitment.

This is a new NOS exhaust pipe spring part # 979194---fits many years and models of Hodaka. Check part # for your application and make sure of fitment.

This is a restored seat for a model 93b It was restored by Hodaka Dave the base has been welded and sanded and new paint The cover is new and the foam is new I see no problems but look very close at pics and the picture from the rear with Hodaka script it’s not exactly perfect straight it’s slightly off center if you look closely Look at the picture close at the welds on the mounting brackets make sure that it will fit your model Item will be shipped fully insured for total cost Please email me any questions

Just about as good of used condition as your gonna find. Just normal scuffs and scratches no broken fins It’s used and not a lot of cross hatch as you can see in pics Light hone and new piston and rings would work well Cylinder is a model 97 Or possibly a Nikasil coating if you want Look at pics and email me any questions

Good used working condition All connections are good Look at pictures the sheathing on 1 will need tape or new shrink wrap sheathing wires are not damaged at all Fits model 97 and 98 Hodaka late model super rat and super combat 100 125 Please email me any questions

This is a model 93 hodaka gas tank that has been cleaned inside 2 3/4” or close to 2 7/8” wide and tunnel is 16 5/8 inches long best I can measure between 16. 1/2 and 16 3/4” look at pictures also bolt hole mounting point to bolt hole center is 19 1/2” Last 3 pictures are the inside of the tank It has its various issues shown in pictures with dings scrapes etc Comes without petcocks It has dents but nothing real major If you really polished it well it would be great on a rider bike The plastic emblems are shown also with a crack etc Look at pictures of measurements

This is a model 93 hodaka gas tank that has been cleaned inside just under 5” wide at the rear mount 2 3/4” or close to 2 7/8” wide inside the tunnel—-and tunnel is 16 5/8 inches long best I can measure between 16. 1/2 and 16 3/4” look at pictures also bolt hole mounting point to bolt hole center is 19 1/2” Last 3 pictures are the inside of the tank it’s really nice and cleaned on inside It has its various issues shown in pictures with dings scrapes etc I have no clue about the JB weld above the cap must have been a small split Comes without petcocks It has small dents but nothing real major only 1 on the side If you really polished it well it would be great on a rider bike The plastic emblems are shown also with a crack etc Look at pictures of measurements

Hodaka Steens Acee Torque Racing pipe Pretty much as good of used condition as you will ever find Look at 2nd picture where pipe comes around frame I’m not sure if that is a dent or made that way Look at pictures close up for tape measurements I’m not sure how many years or models this pipe will fit Please do your research before you buy Please email me any questions