S&s 124" W/ Round Barrels, Baker 6-speed Rsd, Stretched, Easyriders Show Winner on 2040-motos
San Leandro, California, US
Pro Street Pro Street tech info
Pro Street Pro Street description
|
It
rolls on Metzeler 21” front and 18” 300 series rear tires. Rims, brakes, and
sprocket are Tight Custom Pro Series Assault. The front brake was designed to
run through a brake proportioning valve to allow the removal of the handlebar
brake lever. The front brake line is steel tubing with a floating stabilizer
mount instead of hose for a cleaner look. The license plate mount is a new
radial mount that hugs nicely around the primary drive.
The low
profile custom made handlebars conceal a twist clutch and throttle mechanism
where each cable passes through the bars. Foot controls were made to match the
hand controls and are scissor mechanism with the shifter rod relocated with a
custom fabricated link under the primary belt instead of above. The brake lines
pass through most of the frame. The Wire Plus electrical system is equipped with an
electrical harness module that passes through the frame and is equipped with
trouble lights to pinpoint problems. The Compu-Fire voltage regulator, Crane
HI-4 Ignition module and a H-D single fire coil and battery complete the
system.
The Vector exhaust system is stainless steel 1 ¾” to 2 ½” and loud. The custom Icon Air Scoop is a 4-piece fabrication. The old school teardrop coil cover was fabricated to house the hidden accessory panel (Key Ignition, (starter switch and hi & lo beam and coil.) The stainless steel screen was hand press in place and very sturdy. The custom paint is House of Kolor Candy Apple Red over Orion Silver. The custom built seat is by Corbin.
Design and Engineering Features
Frame…………………………………………………………Stretched
8” over backbone; -4” down tube.
Triple
Tree Degree……………………………………………………………………………………....52°
Handlebars:…………………………………...Fabricated
with no mid mount brace and seamless controls.
Hand Levers:……………………………………………………...…………………………………...None.
Internal
Twist Clutch:………………………………………………… .Cable to hidden hydraulic actuator.
Internal
Twist Throttle:………………………………………………….……………..Internal mechanism.
Brake
System:……………………………Single reservoir with brake proportioning valve for dual
action.
Brake
Lines:………………………………………………3/16” Custom lines pass through most of frame.
Front
Brake Line:…………………………………………………………..Steel Tube with floating mount.
Foot Controls…………………………………...……………………………………….Scissor
mechanism.
Transmission
Shifter Rod:……………………….Mounted below primary with custom fabricated linkage.
Oil
Lines:………….…………………………………………………………………………Bottom mount.
Air
Cleaner…………….………………………………………………………..Hand fabricated Air Scoop.
Coil
Cover………………………………………………………….Hand fabricated with accessory mount.
Total
Build Time……………………………….………………………………………2 years, Home built.
Concept,
Research, Assembly and Partial Fabrication………………………………………………Owner.
Best of Show, First Place & Second Place finishes at numerous shows:
Arlen Ness Bike Show, Lake Tahoe Custom Car, Truck and Motorcycle Show, Reno Street Vibrations, Sacramento Autorama, Los Angeles Calendar Bike Show, Corbin's Hollister Custom Bike Show, Renegade Rendezvous, AMD bike Builder's Championship and the 2013 Sacramento Easyrider's People's Choice Best of Show Winner.
It was featured in Thunder Roads Norcal Magazine March, 2013 and Easyriders Magazine Reader's Rides September 2013.
Email me with any questions you may have about the bike: jezabel1st@yahoo.com
Terms and Conditions
Winning bidder must contact me within 24
hours of auction end and make arrangements for payment in full.
Upon completion of auction, a $500.00 deposit is due upon end of listing time
or Buy It Now completion. The full remainder of balance is due within 3
days of auction end. If no contact is made within 24 hours, I reserve the right
to re-list the motorcycle and sell it to the next high bidder or sell it
otherwise. Please arrange for financing prior to bidding.
Buyer is responsible for pickup or shipping
of this vehicle at the buyers expense. This vehicle is being sold as-is by
myself with no warranty expressed, written or implied. The seller, myself,
shall and will make every reasonable effort to disclose any known defects
associated with this vehicle at the buyers request prior to the close of the
sale. Please remember that any bid represents intent to purchase the
motorcycle.
Pro Street Pro Street for Sale
- 2007 custom built bike -"blue by you"(US $10,000.00)
- 2010 custom prostreet chopper motorcycle custom paint(US $2,938.88)
- 2013 custom build bike - all the best parts! arlen ness - baker - no reserve!!(US $9,990.00)
- Motercycle, scooter, softail, custom, revtec engine(US $7,000.00)
- 2012 tube chassis pro trike(US $9,500.00)
- Phat daddy 300' wide-collector custom quality-113" show mtr-pro street-chopper(US $19,950.00)
Pro Street Pro Street by State
| Pro Street Pro Street by City
| Pro Street Pro Street by Color |