Other Touring Motorcycles in Minnesota

For sale is my 03 Springer Softail build.When I purchased the bike, the odo read 4 miles on the motor build.The previous owner did most of the body fab. After I took possession, I changed out the bars and cables, put new grips and pegs on, relocated the bar controls to other areas, swapped in a Mikuni 42mm carb, serviced the entire bike (gaskets, brakes, fluids, etc) and swapped out the fuel tank.This is titled RECO in the state of Minnesota for the custom build.  I no longer ride this bike and it deserves to be ridden. The motor is a 96ci S&S build.

2008 American Thunder Prostreet Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * *Top Line Information Year: 2008 VIN: 1D9SS64D28H251015 Make: American Thunder Stock: MSN3792 Model/Trim: Prostreet Condition: Pre-Owned Engine: 1638 cc Exterior: Black Transmission: manual Mileage: 14,200 VideoDescription This 2008 American Thunder custom Pro Street is in excellent condition with 14,200 miles on it. This low and long black and chrome beauty shows no signs that it has ever been laid down with two little imperfections found on it. There is a rub mark on the front brake lever and a small scratch on the front fender, where it looks like something was dropped on it.

This is a fresh built bobber with only about 150 miles on it , the mile are going up as we are driving it , 2015 chassis design frame and springer front , titled and built in 2016 , 113 ultima 6 speed ultima 2" ol school belt 23" fat spoke wheels Sprotor on rear House of kolor jet black with silver flake and red striping The bike runs , rides ,drives excellent Everything  thing is new and very nicely done Check out the video     http://youtu.be/7Tcyr8UuNLA Rivertownupholstery  . Com

Up for Auction is my beautiful eye catcher one of a kind 2003 Red Horse Custom Chopper Motorcycle It has a intense S&S 113CI Motor with 4400 miles on it this beautiful machine has a 6-speed transmission for a smooth ride it has a softtail chassis it also comes with a removable passenger pillion. This bike has the Dakota digital gages it has been professionally maintained and well taken care of.  If you would like to see it in let's feel free to contact us we would gladly show it.

Professionally built by Donnie Smith. Stretched & Raked, 250 tire, Danny Gray Seat. Every nut, bolt and washer is chrome.

this is a suzuki 1100 bore 3.5 mm over stock wiseco 10.5 to1 compretion 8 valve 3 angle job  newer clutch kit new mirror rebuilt carbs frame is costum built the guy who built it is a dirt car chassi biulder. works for dirt duelers and is a cop he did the gas tank and the fender was done on a inglish wheel .the paint is house or colors I still have 500.00 in paint the bike needs a bike builders title all works perfect the resone im selling may have to have back surgery iv given up riding motorcycles and off road sport machines the only thing ive been doing for work is oil and tire jobs in the shop i love do not wast my time with junk offers THIS BIKE RIPS I HAVE DONE A 3 GEAR START  BURN OUT  NOWONE HOLDING THE FRONT TIRE WHILE SEATING ON THE BIKE the tank needs to be repianted a tree branch from are yard landed on it  507 313 8340 ther is no title

2003 iron works rage st.has rev tech 100 motor was bored 30 over last spring rev tech polished 6 speed tranny,legend air ride suspension,had new alto clutch last summer,bike has a 42 deg rake 6 degree tree 8 up o a 2 inch down tube and a 5 outback bone.hydrolic clutch,rear tire is a Avon av72 cobra size 250/40 18 front is Avon also size mh 90-21.has a custom paint  bike is very nice ride always gets looks no matter where it is 

2005 Red Horse "Mustang 250" - only 3,380 miles  -  LOW RESERVE - bid to win !! this bike is turn key ready - freshly tuned and detailed!  Features: -100ci RevTech engine-Mikuni HSR45 carbuerator-Thunderheart electronics-Samson performance pipes-Avon Venom Tires - 250 rear -Progressive rear suspension -Dakota digital speedo & tach-billet and chrome controls As you will notice in the photos below, this bike has been impeccably cared for. In between rides, it was used for showroom display - always detailed and polished to impress.  Red Horse Motorworks is a NADA recognized  manufacturer , and was a premier builder of exotic choppers from 1999-2007 .This bike originally sold for $27,395!

One of a kind EXTREME MINI CHOPPER Completely hand-build and hand-machined Tecumseh Engine Automatic Transmission Electric Start Mag Wheels Blinkers TOP SPEED 50 MPH!!! This is a super fun little chopper! Seat height 14" Fork tube length 32" Check us out at www.indiantwincities.com  *** Thinking about purchasing a new 2014 Indian Motorcycle?

Custom bobber Chassis design co. frame and front end 113 Midwest ultima engine Midwest ultima 6 speed transOl school 2" belt drive w / hydraulic clutch250 rear tire BMW laser blue Bike runs n rides very good , 800 miles is an estimate , a definite attention grabber always draws a crowd , http://m.youtube.com/watch?v=qKnlc85CVFs

2004 chopper 100 cu rev tech 6 speed trans,lots of jessie james parts has less then 900 miles needs a good cleaning a mush see 3 inch belt drive  cash only at pick up  you can call me at 763--286--4141 is for sale in home town

Up for sale is my beautiful custom chopper.  This bike is a Rolling Thunder soft tail chassis.  It is fully loaded and runs PERFECT AND STRONG!!!

Custom Chopper made by Blackstone Custom Motorcycles, Duluth, MN. Paughco FramePaughco Springer Front EndHarley Motor, 80 cubic inch, 1340ccHarley TransmissionSamson Outlaw PipesHarley Rims & TiresCigarette LighterArlen Ness Side Mirror (Left Side)Many more custom parts, see pictures

Made in USA by CMB custom mini chopper with  polished front fork, polished solid rear wheel with Avon tire,  polished custom billet 16" front wheel. Powered by a 195cc 6hp electric start tecumseh engine with chromed custom pipe.  Has a comet tav 30 belt drive with polished cover.  Gas tank started as a big chopper tank and was narrowed 3" to fit the bike. Has working headlight and led tail light.  Welds on the frame were smoothed and molded, wires and cables were run through the frame when possible.  Disc brake on the rear. Painted with Duplicolor spray can, cleared and buffed- looks nice.  top speed approx 40-45 mph, total length approx 7', seat height 17", total weight approx 175lbs.---made for an average sized adult.  Does NOT have a title.  Please ask any questions before bidding.   Must be picked up.

2005/06 CUSTOM CHOPPER STEED THOROUGHBRED 300-CM WITH 124 CU IN S&S MOTOR. ONLY 5 STEEDS IN THE WHOLE MIDWEST. 7400 miles MADE IN SCOTTSDALE, AZ BAKER 6 SPEED  LED HEADS UP INSTRUMENTS(ALL IN MIRRORS) MONO SHOCK FRAME 2 SEATS SINGLE AND DOUBLE TO TAKE THE LADY.