Other Slingshot SL LE Motorcycles

Take it! This is a smoking deal! A true classic.

MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE E-MAIL US FOR A QUOTE  WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD  HOLY GRAIL 26,26 BOARDTRACK RACER 2024 MMW HOLY GRAIL  26,26 BOARDTRACK RACER     .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS . RIGID  ROLLING CHASSIS  SET UP FOR CHAIN    ,MMW SPECED FRAME  ,, LEFT SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   26 INCH   MMW  WHEELS ,YOU CAN  SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR     TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,   ,  RISER,MMW  BARS ,  , KICK STAND,  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE EMAIL US FOR A QUOTE  WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD ,KNUCKLEHEAD 2024 MMW WISHBONE HOT ROD OG 180 TIRE BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5, 21X 2.15 MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR WHITEWALL    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND, NECK CUPS , RACES  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2024 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2024 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE deposit is non-refundable 

2021 Rods & Rides Drop Seat Bobber, 113" 120hp El Bruto Ultima Engine, 6 speed Transmission, 26" Mammoth Spoke Front Wheel, 200 series back tire.  This is a custom hand built bike, frame up one of the Original Rods & Rides built by TD Ward.  Show Bike, wins Every time, approximately 100 miles on it.

2019 Custom Bobber.  Less than 100 miles on complete engine/frame.93 Cubic Inch S&S Panhead Engine.Chassis Design Wishbone Frame.Evil Spirit Engineering helical tooth open primary.Baker six speed kick only with N1 drum.One off Custom tank, fender, and oil bag with custom paint!Harley springer.PM Wheels, Brakes, and Controls!Internal throttle!Ken's Factory 4 - 1/2" Neo-Fusion Headlight.One off Custom Exhaust.Custom Details and Brass accents throughout the entire bike!! This is a one of one custom that whomever wins the bid will be extremely happy and Unique!! All Sales are Final, All Sales are AS/IS, WHERE IS, NO EXPRESSED NOR IMPLIED WARRANTIES!All Winning bidders will be required to pay an additional $200 Negotiable Documentary Service Fee.All WA State Winning Bidders will be required to pay the additional $200 Negotiable Documentary Service Fee, all applicable WA State Sales Tax and Licensing fees.

 This bike is something that a project bike. Someone that had it before head taking off all of the wiring. So all of the wiring is fairly new wiring harness, new paint, New paint on the frame as well.

Custom Old Skool Bobber 2008 Up for sale is a 2008 Bobber Hard Tail Kraftech Frame with a 34 degree on the neck 2" stretch on the back bone, with Black Powder Coat. Power is delivered by a Rev Tech 110" backed by a Baker 5 Speed Trans, Left side Chain Drive PM Sprocket, Brakes Calipers, Foot and hand controls are also PM products. Custom Mikuni Carburetor and a Hooker Header with Titanium heat wrap.

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SCHWINN STYLE 23,23     BOARDTRACK RACER WITH HOOP  SPRINGER    SCHWINN STYLE    2016 MMW  SCHWINN  STYLE BOARDTRACK   23'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)23X3.75 , 23X3.75 WIRE   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

Selling my Harley Davidson Sportser 1200 bobber bike runs and looks great. 1200ccsportster motor with points conversion "cleaner wiring" Bike has hardtail Paughco 0x30 frame. Have salvage title for motor as well as the bill of sale for Paughco frame"numbers stamped in frame by Paughco" owner will need to have bike inspected to be registered have all necessary paperwork.

1 UP CUSTOM MOTORCYCLE JUST BUILT 2014 121' total performance moter 135 horse power less then 1500 miles on moter baker 6 speed transition chain drive 1 of a kind springier front end 23"frount tire custom spoke wheels custom seat custom paint MUST SEE TO APPRECIATE

I am selling my Old School Cool Sucker Punch Sally Shovelhead Bobber.   It is a Bar Burner with small peanut tank that has around 2 gallons capacity.    She originally sold for around $ 24,500.00 when new.

 This is a Cali Bobber, built by a reputable shop. Redemption Cycles California. Bike is 1980 750c Bobber Custom.

Hello Folks! What you have here is a 2003 Honda Shadow Spirit customized as one "badass midnight bobber". This bike is a beast.

You can not pass up owning this one of a kind motorcycle built by Russell Mitchell @ Exile Motorcycles. This is a beast of a bike !! $ 15,000 OBO willing to deal and all reasonable offers will be considered.  114 cubic inch TP Engineering Engine Jims Transmission with open belt primary Front and rear brakes operated by foot control Twist Clutch designed by Exile All fluids and gaskets have recently been replaced Carburetor cleaned and rebuilt New Battery

THIS IS A 2016 CUSTOM BOBBER THAT I BUILT THIS YEAR FOR MYRTLE BEACH BIKE WEEK. IT IS A 240 REAR TIRE RIGID FRAME THAT IS 4 UP 2 OUT AND 38 ON THE NECK. THE FRONTEND IS A STOCK CHROME THAT IS 4" OVER AND A 5 DEGREE TREE.

 RODS & RIDES 330 DROPSEAT BOBBER     The Dropseat Bobber is what put Rods & Rides on the map. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front tire and the outrageous 330mm rear gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

SPORTSTER WITH WIDEGLIDE FRONT END, FAT BOY RIMS, GROUND POUNDER STRAIGHT PIPES, CARBERATOR, PEANUT FLAT BOTTOM 1970's ,MODEL GAS TANK. BLACK 16" 1.25" APE HANGERS.

This build was just completed and road tested.  This started out as a 91 HD FXSTS, everything has been redone to make it a vintage looking bobber.  Have a lot of custom fabrication done to it.

Super Clean Sucker Punch Sallys Sled.  Added 14 inch Chrome Ape Hangers, rear foot pegs and extended front controls. Bought brand new off show room floor in 2013.

       2012 CUSTOM BUILT BOBBER * S&S 110' MOTOR* 5 SPEED TRANSMISSION* 60 SPOKE FRONT WHEEL* SOLID ALUMINUM RER WHEEL* RIVERA OPEN BELT PRIMARY* FLAT BLACK PAINT* REAR SPROTOR* ONE OFF MEXICAN BLANKET SEAT* BUILT WITH THE BEST OF EVERYTHING LOW RESERVE

It's time to ride! Selling my 2000 Custom. 90 cu in.

I built this bike about two years ago has developed an oil leak from head gaskets but runs good. I've changed gaskets and had heads machined but still leaks.

Smooth, low and fast... this is a custom build 2013 Harley Soft Tail Bobber, 4.5 stretch mono shock has a 1978 xs650 Yamaha engine that is completely redone top and bottom with 277 rephrase crank and cam. 38 carbs with air pods, electric and kick start.

 RODS & RIDES BT RACER The BT Racer is one of our #1 Selling Motorcycles for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The motorcycle is also not a little bike like so many others, it measures an whopping eight foot long and riders that are six foot plus look more fitted than any other bike in the market place.

-1984 Honda Magna VF750- Canadian bike- 46,000km or 28,500mi- Frame converted to one seater and fully powder coated candy red, including dog bones for hard tail conversion, swing arm, and rims.- Buffalo leather spring seat with matching side bag.- Side mount for license plate.- Custom Harley style rear turn signals.- Integrated LED turn signals in head light.- fully custom quad exhaust.- New Dunlop tires front and rear.- Engine gaskets replaced, engine painted with high heat resistant paint, gloss black for the block and matt black for the covers.- Carbs were cleaned and balanced.- New cluster.- Ape hangers 10".- New coolant switch with new coolant.- New ignition wires, caps, heads and spark plugs.- Custom side mount choke cable.- Converted hard tail.- Wire harness tuck. 

This bike is in beautiful condition. I am the only owner. I rode it quite a bit the year I bought it and only a handful of times since.

 Custom 96 Honda VLX 600 Bobber  Took no shortcuts on this build! Bid with confidence knowing you are not only getting a "badass" bike, but also a reliable one! Extremely LOW miles for the year!

Runs and sounds amazing This is one of a kind motorcycle 

2006 custom bare bones bar hopper, fast and loud.  Set up with 110 revtech with 6 speed, 3" bdl open primary.  18x250 rear, 26x3 front avon (new).ready to ride approx 1600 miles, registered and inspected in VA so its legal.

Motorcycle made in 2006. In 2016 the bike was rebuilt in the custom shop. Shipping cost included in the price.

Selling a one of a kind custom built Bobber. It was built using a 2007 Flyrite Bobber frame. It is a hard tail with a springer front end.

Fresh build. Donor bike was a 94 XL 1200 with 3943 original miles. Have built a few of these over the years, mainly for the therapeutic garage time.

DYNO TUNED (WITH DYNO SHEET) ULTIMA EL BRUTO ENGINE I JUST GOT IT OUT OF THE SHOP A FEW DAYS AGO 2500$ WORTH OF WORK DONE IT IS AN ABSOLUTE MONSTER NEW TIRES NEW FORWARD CONTROLS NEW NEW LITHIUM ION BATT AND BATT BOX CARB JUST CLEANED NEW OIL NEW FRONT AND REAR ROTORS NEW CHAIN THIS BIKE HAS NOT EVEN BEEN RIDDEN YET ON THE STREET SINCE BEING BUILT ITS BASICALLY BRAND NEW

2012 South Side Kustom Bobber (includes everything but ENGINE)normal nicks and scratches, needs some wiring help but a new in box ultama wiring harness is includedTHIS BIKE HAS NO ENGINE!! I REMOVED A 96CI S&S, IT INCLUDES EVERYTHING SEEN IN PICTURES EXCEPT THE MOCK UP ENGINE USED TO SHOW THE COPPER !!!V-TWIN SPRINGER FRONT END - NEW THIS SPRINGCOMPUFIRE HIGH TORQUE STARTER- NEW THIS SPRINGULTAMA WIRING HARNESS - NEW IN BOXULTAMA 6 SPEED ULTAMA 2" OPEN PRIMARYDYNA ADJ IGNTION S&S SUPER E WITH INTAKEBATTERYNOTE: THIS WAS A RIDING BIKE 3 WEEKS AGO, I DONT TRUST THE WIRING AS STATED ABOVE, THE PICTURES SHOW AN ENGINE THAT IS NOT INCLUDED THIS IS LOCAL PICK-UP ONLY

1984 Honda Goldwing GL1200 with clear title and signed bill of sale.  Low mileage Goldwing.  Miles are 23,340.  Original odometer will go with the bike.  This is a very nice running Wing.  Starts very easily.  Runs very strong.  Obviously, the bike has been heavily customized.  Bike's curb weight has been pared down to a scant 430 lbs.  Consider the bike's customized new look, along with the lighter weight and tuning modifications made, and that equals less weight plus more horsepower, so you not only have a bike that will strike positive conversations with the crowd.  It will also lay down an impressive patch of rubber when leaving. List of modifications are as follows:   Starting from the front, running a 130/90-16 Dunlop.  Front forks have been shortened and are equipped with Redwing override springs.  Handlebars are shortened flat-track style.  New clutch master cylinder and new brake master cylinder, new LeFossi brake lines front and back, new mini black speedo, new Volar speedo cable and throttle cable, new chrome tight-radius throttle control.  New grips.  AMF headlight with double rings.  Gas tank is vintage Kawasaki KZ1000.  Has been lined, and comes with new key.  Paint on tank is Omni Satin Black.  Made in America graphics are 7-year vinyl.  Can be left as is or easily removed.  La Rosa solo seat black tuck 'n' roll with red stitching.  Blinkers front and back are from Krator (very nice quality with thick chrome).  Drag Specialties chrome vintage-style side mount with Duolamp tail light.  Rear tire is 150/90-15 Tour Master.  Rear shocks are stock Goldwing.  They have been rebuilt and are using Redwing override springs as well.  Carbs have been gone through with parts replaced, as needed.  Original spark plug wires have been replaced with Red Dynatek wires.  Chrome headers are supplied by MAC, with custom made shorty mufflers.  Bike has all new wiring throughout, and includes a high-output sealed battery. PLEASE VIEW THE VIDEO OF BIKE RUNNING WITH ALL OF IT'S FUNCTIONS, AS FAR AS HEADLIGHT, TAIL LIGHT, ETC.

Photo Viewer 2013 Custom Built Motorcycles Bobber Custom 330 Chassis RODS & RIDES BY TD 330 CHASSIS - DROPSEAT BOBBER CUSTOM GRAY PAINT - LOW MILES VIEW OTHER AUCTIONS ASK SELLER QUESTION Vital Information Year Make Model Mileage 2013 Custom Built Motorcycles Bobber Custom 330 Chas... 100 Exterior Interior Stock # VIN GRAY/BLACK/SILVER BLACK F7847 1R92H2A19DS699302 Engine view window sticker view new window sticker Photos TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 Description 2013 Custom Built Motorcycles Bobber Custom 330 Chassis RODS & RIDES BY TD, LLC. 330 CHASSIS - DROPSEAT BOBBER WORLD FAMOUS MACHINES BUILT BY HAND, ONE AT A TIME .

Used Motorcycle Store 1903 IL Route 120, Mchenry, IL 60051 2235 South Eastwood Drive, Woodstock, IL 60098 EBizAutos  2000 CONFEDERATE CONFEDERADO CONFEDERADO 2000 CONFEDERATE CONFEDERADO PHOTOS PHOTOS REQUEST MORE INFO VIN: 1C9SB2753YB071008 Stock #: U2325M Condition: Used Clear Title Mileage: 12,401 Engine: V-TWIN 1666cc 102ci Exterior Color: Black PHOTO VIEWER VIEW OTHER AUCTIONS EMAIL A FRIEND MORE DETAILS Vehicle Overview 2000 CONFEDERATE CONFEDERADO  BLACK  FEATURES AND ACCESSORIES:  102ci ENGINE SUPERTRAPP EXHAUST INVERTED FRONT FORKS 12,401 MILES  888-933-7674 Used Motorcycle Store 888-933-7674 - We sell motorcycles, arrange motorcycle financing, perform world class motorcycle service, accept trade-in vehicles, purchase vehicles outright, and have arranged delivery for hundreds of vehicles all over the world. We offer motorcycle rentals and arrange fantastic motorcycle tours from both locations during the riding season. Our showroom is open Monday - Thursday 10:00A.M.

Up for auction is a beautiful custom bobber. This bike is a 2005 Suzuki S40 that has been converted into a hardtail bobber this past year. I bought this bike as a stock S40 in October 2015 with 3600 miles.

Rolling frame with motor. 1973 Honda cb350 K scrambler that has had a TC Bros weld on hard tail added. Build your own bike from this solid powerplant!Comes with all new wiring harness and electronics in tact. Ran until stripped. 

New build by Lock Jaw Customs with HAMMER Performance motor.  VERY fast VROD destroyer.  These guys only build one to two bikes a year so the attention to detail is incredible.

Fall Special. Custom, Bobber. Honda CFMT.

Custom built 1979 Suzuki GS 1000 this bike runs and rides great. Has tons of power. The bike has a new battery good tires 12" ape hangers k&n filter flat black paint comes with a highway bar with cruzing pegs not on the bike right now.

Custom 2010 bobber built by Design Worx. Frame is by paucho engine is s&s generator style 93" panhead, baker 4spd trans kick start only. Frame, bars,rims and alot of parts copper plated then antiqued.

2006 Harley Davidson Sporster 'Bobber' Motorcycle. 1200V Twin with BUELL HEADS, Front dual disc brakes, Custom Solo Leather seat, and Satin black paint. Runs and drives great.

Up for sale is a Grandure Cycle (Mike Phillips) bad ass bobber.This bike is a head turner and a blast to ride. It's got a revtech 100ci motor with compression releases. Joker controls.

    MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2016 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2016 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:

I have too may bikes and toys so its time to let this one go.  Its a rigid bobber with a Pughco frame.  I made custom air bags under the seat so you get the look and ride of a rigid but it cruises and goes down the road soft and smooth. Has a 88 cu in revtech, its the updated one so no problems there.  Just had the paint done with a pearl green metallic over 20 coats of paint, the pics don't do it justice. The shifter is custom made and is out of 316 polished stainless,  also custom made clutch pedal.  Has a Jaybrake billet master and Brembo brakes.

Year: 1974 Model: Iron Head Builder: FD Motorcycle and Customs Displacement: 995.7cc Carb: S&S Shorty Air Cleaner: S&S Exhaust: Straight Pipes Transmission: Right side shift 4 speed Frame: 1974 Custom Hardtail       Rake 38 Degrees       4" Stretch Wheels: Front Wheel Size 21" 40 Spoke Rim     Tire is an Avon Speedmaster Front Brake: N/A Rear Wheel: Stock H-D    Size 16" Spoke   Tire is a Shinko 130/90-16 Rear Brake: Drum H-D Stock Paint: Color Gloss Black    Engine: Satin Black Accessories: Foot Controls & seat built by FD Motorcycle and Customs. Rear fender ribbed 5" wide. Tail Light Brass by FD Motorcycle and Customs.

REDUCED  again ! This Bike Has the BEST of the BEST All Surfaces are Powder Coated, Painted or Chromed The bike is a blast to ride it weighs less than 400lb and has 111hp on the back wheel.   Power Train 113” S&S Super Stock Sidewinder D port heads Power House 620 Cam Rated @118hp Dynoed @111hp Rear wheel Crane Single Fire Ignition Belt Drive LTD Clutch and Primary Drive Jims 6 Speed Transmission (tall 1st and 6Th overdrive) Ceramic Coated Exhaust   Chassis Daytec 103+ 180 Chrome Moly Frame,  Billet Engine /Transmission Mounts  (very strong very light) STORZ CERIANI HD55 Inverted Front Suspension Progressive Rear Suspension Arlen Ness Chrome plated aluminum rims stainless steel spokes 18” Front &17” Rear  W/Billet Hubs Dual Front/Single Rear Performance Machine Rotors and Calipers Jesse James Foot Controls   Electrical Dakota Digital Speedometer Wire Plus Main Harness Self-cancelling HD turn signal module BadLands “Illuminator” Turn Signal Module Makes Turn Signals Running Lights and Brake Lights Joker Tail Light/Plate Mount (sideways) 3hp Terry Starter Mike Milburn repainted the new sheet metal about 8 years ago (400miles ago) with gold leaf in the paint and gold plated plumbing on the carb.

This custom bobber is built upon a 1999 Yamaha Roadstar foundation.  Less than 12,500 on this engine, the bike has been rebuilt with new and custom parts for an exceptional and unique bobber look. Features: Custom fender work and paintNew Metzler ME 880 21" Front Tire on Powder Coated Spoke rim.New Metzler ME 880 200 Wide Rear Tire on Powder Coated Spoke rim.LED integrated turn signals in front/rear.Custom red wrapped exhaust (straight pipes).  Deep/Loud, sure to get attention.Internally wired Powder Coated T-Bar handlebars1929 Ford Pickup Headlight Model T Ford Rear Tail/Stop lightCustom Rear Fender / Luggage Rack / Sissy BarOpen Front Pulley (you can see it turning as the bike moves)Matching Powder Coated Rear Pulley / Belt GuardMotion Pro Stainless Steel Cables & Chrome GuidesCustom Side PanelsRetained the suspension and swingarm to ensure a smooth ride (but still gives that bobber look)Chromed Forward Controls This bike is a blast to ride.  Pulls strong and barks loud.  It turns heads everywhere I've taken it.   The title remains on a 1999 even though I would consider this a custom build.  Insurance on a 1999 bike is significantly less expensive than titling it as a 2016 build.   Something to consider. This is one of many Roadstar bikes I've built this year.  I know these bikes.  If you have questions, please ask - I'm sure I can easily answer any concerns or inquiry.  This bike was a joy to build and even more fun to ride.  I simply want to pass this along so I can begin another project.

2006 CUSTOM PRO STREET. RIGID FRAME 250 REAR TIRE. 21 INCH FRONT WHEEL.

Partaker of exhibitions Kiev Kustom Kulture 2015, Kustom Konvent Poland 2016.

I am selling my knucklehead, brand new S&S 93" pro stock knucklehead billet engine!Rigid frame, custom springer, old school firestone and Avon tires, all stainless fasteners with leather washers, stainless exhaust, brass headlight and taillight, stainless license plate and tail light holder , custom seat with Italian leather, all hidden wiring, S&S Super E carb,6 speed transmission, 2" open primary, Brembo brakes and much more .This bike was commissioned to be built with the highest standards and the best parts . Everything is brand new, the whole bike has a total of 500 shake down miles through Texas Hill Country.The bike was built to ride and ride well.  Runs and rides fantastic, the brakes are awesome, and the S&S engine is a serious piece of art!Beautiful machine, I am the first and only owner, I have the clean and clear Texas title in my name in hand.This Knucklehead is ready for a show, to ride or display.Please feel free to email with any questions.Thank you

Up for grabs is a 1973 ironhead chopper. Over 8.5K Invested in it.  1973 1000/Bored to 1100 Ironhead motor in a 2003 Harley sportster hard tail frame and a springer front end. This is a bad ass one of a kind bike.

This Bobber Rat Bike was professionally built by Bobber Pros of Mesa Arizona. It was built on the framework of a 1998 883 Sportster. It has a hardtail frame and a springer front end.

Custom built bicycle with a 48 cc engine. One of a kind frame with 3 year warranty.  Max speed of 55 MPH.- Front and rear fenders- 7/8 Gallon gas tank- LED Headlight- Springler suspension- 4 Stroke automatic motor- 2 HP - Ignition by pull starter - Mechanical disc brakes 

Sanger Down and Dirty rigid frame 100 inch Rev Tech engine, 5 speed Rev Tech Transmission, Rev Tech electronics and Drivetrain. Paughco Z bars and oil tank. Performance machine billet rear caliper, floating rotor and bracket.

The RODS AND RIDES BT RACER is a machine inspired from the days of actual Boardtrack Racing. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front and rear tires gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

2005 PROPER CHOPPER, 357 BOBBER 107ci S&S ENGINE  5 TRANSMISSION  130/90/16 FRONT TIRE  140/90/16 REAR TIRE  12' CUSTOM APE HANGERS  NEW BATTERY  FRESHLY WRAPPED EXHAUST PIPES  IT COMES WITH THE FRONT FENDER AND MOUNTING HARDWARE , BUT I LIKE HOW IT LOOKS WITHOUT IT ON. THIS BIKE IS A MONSTER TO RIDE , SUPER QUICK AND TON'S OF TORQUE  I WOULD NOT RECOMMEND THIS BIKE FOR A BEGINNER STARTS GREAT AND RIDES GREAT  TEXAS RESIDENTS ARE RESPONSIBLE FOR ALL LOCAL STATE LICENSING FEE'S PLEASE EMAIL, CALL OR TEXT WITH ANY QUESTIONS  THIS BIKE IS FOR SALE LOCALLY SO AUCTION MAY END EARLY