2016 Other Makes Cafe Racer on 2040-motos

Recently completed, one of a kind custom Cafe Racer style motorcycle.  Motor and transmission came from a low miles 2002 Harley Davidson Softail.  Frame is one of a kind made by Hot Rod Alley in Lompoc, California; tank and custom oil tank in back of bike were also custom made by Hot Rod Alley.  Paint and pin-stripping were also done by Hot Rod Alley.  Besides motor and transmission, everything else is new.  Electrical components and battery are tucked under the seat to keep things neat and clean; all wiring is new and the entire system is bullet proof and protected by in-line fuses and circuit breakers.  Rear LED brake light and LED turn signals work; turn signals can be operated as hazards.  Handlebar switch from Performance Machine on clutch side controls the high-low beam and turn signals.  Ignition key located under the fuel tank, above the coil.  Front brakes and mirrors are included but not installed.  The headlight is originally from a Ford Model-T, but was upgraded with new wiring and high-low halogen bulb.  Crossover fuel line was re-located underneath the tank; will need to be refinished.  Bike starts right up and sounds amazing with the Bassani Covington Hot Rod Exhaust.  All fluids are new, and the oil filter is also new.  Wiring is minimal and routed underneath the tank to keep the bike neat and clean.  Transmission was converted to hydraulic clutch and custom lines were cut to size.  Electrical components includes a Motogadget control unit and Antigravity 16 Cell Lithium Battery.  Front turn signals are super easy to install with the Motogadget M-unit.  The ignition is a Thunder Heart Stand-Alone ignition system.  Front and rear wheels, and the forks are new Harley Davidson parts.  The rear brake system is Performance Machine.  The primary cover, mid controls, handle grips and clutch controls are by Performance Machine.  The Twin Cam chest was recently gone through completely with new gaskets, oil pressure relief spring, and a KC International High Volume Oil Pump was installed to improve overall oil pressure and help cool down the motor.  The seat was custom made for this bike, to include a custom aluminum pan to keep the bike lightweight.