2005 Kawasaki Nomad - Kingman,kansas on 2040-motos

Moto blog

K-Tech release 25SSK for Big Piston Forks

K-Tech have released their popular 25SSK front fork open cartridge system to fit all Showa Big Piston Forks. Here's what K-Tech have to say about them: These lightweight aluminium units are supplied to the same exacting specification as all other 25SSK fitments with 14mm piston rods and a 25mm cartridge tube, the 14mm piston rods displace a large volume of oil through the 25mm control pistons giving enhanced damping characteristics over the standard Big Piston Fork and allow a bigger volume of air for a more precise feel at the bottom of the fork travel. The cartridge kits have compression and rebound adjustment in both legs and are supplied with 1.5mm Flow Control Valves for a more accurate adjustment, all necessary hardware is supplied to convert the Big Piston Forks to take the cartridges but it is necessary to order the springs you require as these are not included, customer price for the 25SSK cartridges is £725.00 + VAT and are available for the following models:- Honda CBR1000RR 2012 Kawasaki ZX6-R 2009-2012 Kawasaki ZX10-R 2011-2012 Suzuki GSXR600 2011-2012 Suzuki GSXR1000 2009-2012 Contact K-Tech on: +44(0)1283 559007.

2011 ZX-10R onboard lap.. worked out nice

I've been playing around with video cameras in the office here for a good year with varying degress of success. The GoPro we use is great - when it's behaving. But I've had too many sessions where it doesn't like the SD card I fed it, the batteries die as you're leaving pit lane or you record a perfect lap, but with the camera pointing at the sky, or the tank.

Kawasaki Recalls Concours 14 for Rear Brake Problem A Previous Recall Failed to Fix

Kawasaki is issuing a recall for the Concours 14 for a rear brake pedal issue the company had previously tried to fix in 2008. According to documents released by the National Highway Traffic Safety Administration, road debris can get trapped between the brake pedal and a pedal guard, causing slight pressure on the rear brakes. The rear brake drag can cause the brakes to overheat, potentially leading to brake damage, a rear brake lockup or failure of the rear brakes.