Find or Sell Motorcycles & Scooters in USA
  • 2014 Custom Built Motorcycles Bobber2014 Custom Built Motorcycles Bobber (2014)
    Up for sale is an exceptional 2014 Zero Engineering Type 6, as seen in IRON MAN, featuring a stunning custom paint job by the renowned artist Head Case, custom pipes, and a Shovelhead engine. This unique motorcycle combines classic chopper aesthetics with modern engineering, making it a standout piece in any collection. Included with the bike is a matching helmet that has never been used, painted in the same exquisite scheme as the motorcycle.
    2024-07-10 11:44:15
    West Hollywood, California, United States
    3,145
    58,000.00
  • 2010 Custom Built Motorcycles Bobber2010 Custom Built Motorcycles Bobber (2010)
     2010 Orange County Choppers Bobber, has S&S carburated 100 cubic inch motor with super stock heads and cams putting out about 100 horsepower and only 33 miles on the bike, this is a new bike not even broke in.  Bike is hard tail with solo seat with belt drive and really runs strong. Bike has 2 into 1 Supertrap exhaust system.   Has new battery and just checked out at bike shop.
    2016-12-17 04:37:57
    Quincy, Illinois, United States
    33
    15,000.00
  • 1996 Custom Built Motorcycles Bobber1996 Custom Built Motorcycles Bobber (1996)
    Custom hardtail, springer bobber. Very clean sportster 883 with low miles (approx. 26k) that runs excellent.
    2016-12-15 04:39:31
    Vero Beach, Florida, United States
    0
    11000
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    2016 After Hours Bikes custom H-beam bobber/chopper project bike.  Here is what is all included: - 2016 After Hours Bikes custom H-beam rigid bobber/chopper frame (Powder Coated)- SMT Machine 26" x 3.75" front wheel with hubs (Custom Airbrushed)- Vee Rubber Monster 120/50-26 front tire- SMT Machine custom made 20" x 10" rear wheel with hubs (Custom Airbrushed)- Avon Cobra AV72 280mm/40VR20 rear tire- Ultima 2" Open Belt Drive Complete Kit- Mooneyes 3 Qt. Aluminum Oil Tank w/mounting brackets- FSD Hotrod Sinful Exhaust Ceramic Coated Inside and Out w/flanges- Custom made After Hours Bikes bobber gas tank- Fat Katz rear fender with molded in fender struts- Custom made After Hours Bikes foot pegs- Custom made After Hours Bikes seat pan- DNA Chrome Springer Front End with extra set of springs- DNA Chrome Rear Brake Caliper- Chrome Handle Bar Risers- Polished Aluminum Hand Control- Chrome Upper Motor Mount- Vintage Ford Tailight- I have the VIN tag and title for the bike Please Read!!!! ***Bike was custom painted a Diamond Pearl White color with a lot of custom airbrushing done by Y-Not Kustom Designs in Ocala, FL.  There has been a ton of money spent on the paint and airbrushing.  The frame, gas tank, oil tank, rear fender, front and rear wheels all have custom airbrushing on them.  Paint needs to be finished.  ***The seat pan is painted pearl white to match the rest of the bike but I don't have a updated picture of it so that's why its bare steel in the pictures ****The plastic dummy engine and the handle bars are not included with this bike project, the engine is in there to show you what the exhaust looks like on the bike.
    2016-12-12 04:38:25
    Onalaska, Wisconsin, United States
    0
    20,000.00
  • 2008 Custom Built Motorcycles Bobber2008 Custom Built Motorcycles Bobber (2008)
    Adult owned , never dropped , never abused !!!  LOW MILES !  Garage kept.
    2016-12-07 04:39:18
    Toms River, New Jersey, United States
    2
    8,300.00
  • 2011 Custom Built Motorcycles Bobber2011 Custom Built Motorcycles Bobber (2011)
    Custom bike built between 2010-2011. Less than 500 miles. 127in ultima el bruto with 6 speed ultima transmission with an open belt primary, chain drive.
    2016-11-18 04:44:11
    Saint Petersburg, Florida, United States
    500
    12,000.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    Custom Built Bobber by KPC South City ChoppersPaughco Wishbone Rigid Frame107 S&S Motor with Dual Mikuni Carbs and shot gun pipesUltima 6 speed transmissionFat Daddy wheels with Avon tiresCustom Made Seat by DJ Designs4" under springer front endPerformance Machine brakesDigital tach and speedometerRivera Pro Clutch and 2" open primary Only 2500 miles since built.
    2016-11-11 04:39:19
    South San Francisco, California, United States
    2
    12,800.00
  • 2011 Custom Built Motorcycles Bobber2011 Custom Built Motorcycles Bobber (2011)
    This custom RODS AND RIDES BT RACER is a machine inspired from the days of actual Boardtrack Racing. This machine was built for not only speed and function but for the flowing lines as you can see. The awesome 23" front and rear wheels give this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.
    2016-11-08 04:38:38
    Peoria, Arizona, United States
    1
    21,500.00
  • 2003 Custom Built Motorcycles Bobber2003 Custom Built Motorcycles Bobber (2003)
    2003 sporty . 1200xl engine runs strong pulls hard . Around 15000 miles on motor out of a non wrecked bike .
    2016-10-31 04:39:19
    Bedford, Indiana, United States
    15
    20000
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
      2006 Pandemonium Chopper "Dirty Hooker" 500mi LR The Dirty Hooker is “As featured in Cycle Source Magazine”.   If your looking for something special, ya’ know something that you wont see at every bike night, meet, or just cursing around, look no further.  This bar hopper style chopper was built by Daniel Donley, founder of Pandemonium Customs.  It was the first bike built by Pandemonium and shot by Cycle Source Magazine, and looks as good today as it did then.    I am listing this bike for a friend who purchased it as a show and promotional bike for his Harley Dealership many years ago.  He has put less than 500 miles on it, and is looking to downsize his collection.  Check out my other auctions for additional custom bikes.  Please call Brian with any questions @ 904-304-480Zero.  Take a look at all the pictures.
    2016-10-30 04:40:27
    Palmetto, Florida, United States
    500
    15000
  • 1981 Custom Built Motorcycles Bobber1981 Custom Built Motorcycles Bobber (1981)
    You are bidding on a 81' custom bobber chopper tracker. Bike was purchased stock and built into a professional awesome lil, chopper. The custom hardtail is built out of 1" DOM tubing .
    2016-10-28 04:39:11
    Glenside, Pennsylvania, United States
    5
    45000
  • 1973 Custom Built Motorcycles Bobber1973 Custom Built Motorcycles Bobber (1973)
    My Dad purchased this bike from Burbank California several years ago, bike has only been road a few times, runs good sounds great. it is a 73 single carb. Does need a small auxiliary battery to run the head light.
    2016-10-24 04:39:24
    Broken Arrow, Oklahoma, United States
    999
    36000
  • 2003 Custom Built Motorcycles Bobber2003 Custom Built Motorcycles Bobber (2003)
    2003 Paughco Bobber. Titled as- Make: Paugcho, Model: Chopper. Custom Built in 2003, taken completely apart in 2016 to update.
    2016-10-19 04:38:34
    Wichita, Kansas, United States
    2
    5,500.00
  • 1976 Custom Built Motorcycles Bobber1976 Custom Built Motorcycles Bobber (1976)
    This listing is for a new custom built 1976 Harley Bobber / Chopper. This has been a build for the last couple of years that I have poured my heart, soul and time into. It started as a bone stock bike with 8000 original miles on her and the build went on from there.
    2016-10-16 04:38:44
    Ravenna, Ohio, United States
    8
    26000
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    2006 Sucker Punch Sally Bobber for sale. Estimated miles are around 700 - 800miles in total.  Custom paint job and has the optional custom leather seat. Not a production bike, everything was fabricated and hand build.
    2016-08-24 04:51:46
    Clinton, Iowa, United States
    800
    10,750.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    200 Series ULTIMA Rigid Frame Rebuilt EVO motor King Spoke Wheels DNA Stock Springer S & S Super E Carb New Rubber Lo Bro Custom Frisco Tank WCC One Ton Ho Rear Fender Ultima Single  Fire Ignition Custom Leather Seat. No time to complete. Runs and Drives now.  Rear fender needs repainted.  Small marks on frame were chain hit powdercoat.  Have the MSOs for title.
    2016-08-17 04:51:49
    Portland, Tennessee, United States
    50
    5,650.00
  • 1997 Custom Built Motorcycles Bobber1997 Custom Built Motorcycles Bobber (1997)
    1997 Custom built Chopper / BobberTrue all original S&S motor from top to bottom. S&S carburator. Low miles on bike5 speed transmission18' front and rear Custom wheels, custom brakes. Bike starts, runs and shifts very smooth. Only the best parts were put on this bike.
    2016-08-10 04:52:55
    Hollywood, Florida, United States
    999
    17000
  • 1968 Custom Built Motorcycles Bobber1968 Custom Built Motorcycles Bobber (1968)
    Custom built Harley Davidson shovelhead, Baker 4 speed transmission w/N1 shift drum, Paughco frame, CCW girder, Wassell style tank, Moon 3qt. oil tank, vintage American mags. Wilwood sprocket/rotor brake.
    2016-08-10 04:52:42
    Omaha, Nebraska, United States
    6
    39000
  • 2014 Custom Built Motorcycles Bobber2014 Custom Built Motorcycles Bobber (2014)
    2014 custom Custom built frame and front end from chassis design coCustom cut 26" wheels front sums x 113 ultima 6 speed ultima Runs and drives excellent  http://youtu.be/Pokw4ov9rDM  
    2016-08-07 04:49:37
    Stillwater, Minnesota, United States
    2
    20,000.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    This is a going out of Bussines Auction. Bikes where built by South Dade Choppers LLC. Sale includes 1 bobber 2 choppers and 1 full rolling chassis.
    2016-08-03 04:54:13
    Miami, Florida, United States
    0
    24000
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    ****Relisted****  For Sale 2006 Flyrite Chopper Engine:96" S&S Engine Mileage:3400  Transmission: RevTech 5 Speed Drive:3" BDL Open  Shifter: Suicide Frame: Rigid  Forks: Springer  Brakes - Front & Rear: Flyrite  ........................................  This is a very nice bike. This was my first bike and  I learned to ride on it. Unfortunately I simply do not ride enough to justify it just sitting in my garage.  The bike will have a fresh service and oiled chain, ready to roll.  I can also arrange shipping for the buyer.  Please feel free to Text me with any further questions.  Thanks Ryan 847.849.9480
    2016-08-01 04:54:20
    Algonquin, Illinois, United States
    3
    22000
  • 2011 Custom Built Motorcycles Bobber2011 Custom Built Motorcycles Bobber (2011)
    2011 Orange County Choppers The "Angels of Hope" Bike.   1 of 1 Custom build Bobber One of One - 2011 Orange County Choppers -- Old School custom-build. Paul Sr. and his OCC TV show crew built this exclusively for the Angels of Hope Charity, for their raffle on 8-20-2011 I purchased this motorcycle from the AOH charity raffle winner.
    2016-07-31 04:51:35
    Fort Lauderdale, Florida, United States
    350
    19,995.00
  • 2006 Custom Built Motorcycles Bobber STRIPPER CHOPPER2006 Custom Built Motorcycles Bobber STRIPPER CHOPPER (2006)
    Used Motorcycle Store 1903 IL Route 120, Mchenry, IL 60051 2235 South Eastwood Drive, Woodstock, IL 60098 EBizAutos  2006 HELLBOUND STEEL STRIPPER BOBBER CHOPPER STRIPPER CHOPPER 2006 HELLBOUND STEEL STRIPPER BOBBER CHOPPER PHOTOS PHOTOS VIDEOS VIDEOS REQUEST MORE INFO VIN: 1H9SR293861399677 Stock #: C-JASON Condition: Used Clear Title Mileage: 1,004 Engine: 93ci V-TWIN 1523cc Exterior Color: Black PHOTO VIEWER VIEW OTHER AUCTIONS EMAIL A FRIEND MORE DETAILS Vehicle Overview 2006 HELLBOUND STEEL STRIPPER BOBBER CHOPPER BLACK FEATURES AND ACCESSORIES: GREAT CONDITION 93ci V-TWIN 1523cc ELECTRIC AND KICK START OPEN PRIMARY  ALLIGATOR BOB CUSTOM SEAT $1,300 VALUE LOCAL TRADE IN 1,004 MILES 888-933-7674     Used Motorcycle Store 888-933-7674 - We sell motorcycles, arrange motorcycle financing, perform world class motorcycle service, accept trade-in vehicles, purchase vehicles outright, and have arranged delivery for hundreds of vehicles all over the world. We offer motorcycle rentals and arrange fantastic motorcycle tours from both locations during the riding season. Our showroom is open Monday - Thursday 10:00A.M.
    2016-07-29 04:52:04
    McHenry, Illinois, United States
    1
    9,995.00
  • 1979 Custom Built Motorcycles Bobber1979 Custom Built Motorcycles Bobber (1979)
    1979 IRONHEAD HD Sportster. Stripped down to bare essentials. It's a chopper folks.
    2016-07-27 04:52:54
    Jefferson City, Missouri, United States
    31
    5,000.00
  • 2007 Custom Built Motorcycles Bobber2007 Custom Built Motorcycles Bobber (2007)
    2007 custom built chopper with a 2004 Indian PowerPlus 100 engine, 2001 Revtech Indian tranny, Ultima 3 3/8" belt drive, hidden shock frame, Ness widened apes, bobber tank, brown solo seat with springs and stick on passenger pad, 260 rear tire, and black spoke wheels, Hawg Halter brakes, springer front end, Bub's upswept exhaust, Indian floorboards . i used Indian components whenever possible on this build. at the time, they were out of business.
    2016-07-25 04:53:18
    Londonderry, New Hampshire, United States
    1
    41000
  • 2013 Custom Built Motorcycles Bobber2013 Custom Built Motorcycles Bobber (2013)
    2013 Fatman Cycles Custom Bobber / Chopper This bike has been in storage for a few years due to job related traveling.  I hate to see this bike not being enjoyed so I have decided to sell.  Bike is a complete custom with less than 500 miles on bike (less that 4500 miles on Motor and trans) *Metalflake Gold pain with custom pinstripe *12" Ape hangers *DNA Springer *DNA spoke wheels with 200/60B16 in rear and 90/90-21 in front *Fatman Cycles wide tube frame *2001 Harley Sportster motor and trans (Stock) *Custom chrome exhaust (not sure the make but very loud) *Choppers inc original 6 shooter risers *Choppers inc original 6 shooter pegs and shifter peg *Choppers inc original 6 shooter grips *Choppers inc original trucker girl tail light/plate holder *Ultima Ignition system *Custom made gas cap All parts on the bike have been custom made with a lot of detail.  This bike has won many bike nights and is a real attention getter.  Pretty much everything on the bike is new and has very low miles. Bike has been very reliable and is very light and surprisingly fast. I have noticed that the front tire looks to be loosing air so I have a brand new Vee 90/90-21 M/C 54/4 tire to replace.  I have not got around to doing this so I am including it in the sale.
    2016-07-25 04:53:14
    Fort Worth, Texas, United States
    500
    33000
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
    No Reserve Auction!High Bid Wins! 2015 Custom Bobber Softail. 25k invested.
    2016-07-21 04:52:05
    Albany, Kentucky, United States
    86
    4800
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
    2012 Orange County Chopper (OCC) Greenie model. Dark green metallic with scrollwork on fenders. 1836 miles.
    2016-07-17 04:49:53
    Beacon, New York, United States
    1
    13,250.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH VIN NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA AT WEST COAST CHOPPERS AUSTIN TX LOCATION  NEW WEST COAST CHOPPERS  MODEL , WE HAVE WAITED 10 MONTH TO GET THESE NEW FRAMES AND THEY ARE REALLY NICE , NEW FRAME DESIGN , 3-D RADIUS AXLE BLOCKS , BILLET BATTERY TRAY , HOUR GLASS NECK, NARROW OIL TANK ,    2015 NEW STYLE 3RD GENERATION  CFL  200 TIRE , MADE AT WEST COAST CHOPPERS AUSTIN TX LOCATION  THIS IS A CUSTOM SPEC FRAMES , WCC CHARGES $4400 ALONE FOR THE FRAME , AT TAKES 6 MONTHS TO GET , THIS IS IN STOCK . WE HAVE 2 OTHER AS WELL WITH DIFFERENT SPECS  2016 WEST COAST CHOPPERS  TRACKER 200 TIRE    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .
    2016-06-28 04:54:10
    Thousand Oaks, California, United States
    0
    7,200.00
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
    2012 custom built ridgid with 88" S&S open primary,moon oil tank,super shorty pipes,ape hangers fun bike to ride. Title in hand.Also have extra set of bars,hooker pipes,oil tank that goes with bike.Leather bag shown on bike does not go with it. Will deliver or meet buyer within 250 miles of 03743. 
    2016-06-21 04:58:06
    Claremont, New Hampshire, United States
    3
    15000
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    2016 South Dade Choppers Old school Bobber. This bike feats 113ci engine, 6spd trans, 2" belt drive. Awesome hot rod flat black paint job, red and white pin striping done by Moe Image Customs.
    2016-06-17 04:57:19
    Miami, Florida, United States
    8
    17,665.00
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
    2012 Custom Chopper - Hard Tail Springer113 cu Ultima6 speed tranny3" BDL belt drivePowder coated red rimsWest Coast Chopper tank w/sight glass gaugeExile sproter Call Patrick for details - 806-282-9303Bike attracts attention wherever it goes!Bike is for sale locally and auction may end sooner if sold locally.
    2016-06-17 04:57:15
    Kenedy, Texas, United States
    1
    11,000.00
  • 2008 Custom Built Motorcycles Bobber2008 Custom Built Motorcycles Bobber (2008)
    Custom Chopper Bobber Harley Replica NEW Rigid frame Street Pro Canyon Jammer  CUSTOM CHOPPER-BOBBER HARLEY REPLICA    ***********   NEW RIGID      REPLICA 100” motor, 3” open belt drive, 6-speed transmission NEED FOR SPEED SATISFIED TORQUE CANYON-JAMMIN’ Harley Replica Rigid    new ‘48 Pacho Frame ‘Plants the butt so YOU FEEL THE ROAD’ CUSTOM PAINT - stares of envy Sleek, low, nimble, rocket-fast, subtle perfectly designed lines   100 CUBIC INCH-engine (Harley Replica;Ultima)     110hp. 3” OPEN BELT PRIMARY with just enough glistening custom cover to keep it         from shredding itself if it sees a bit of gravel. Bobber fender and rack, customized for perfect lines     Custom Paint, Flames on race red backdrop (be seen, be heard, be proud) 100 mile break-in per motor specs, oil change, then 350 miles of riding by builder to be sure       it’s right New and 1 step better.
    2016-06-14 15:22:56
    Central, Utah, United States
    475
    17,700.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
    VERY CUSTOM ONE OFF bobber for sale! This is by far the nicest shifting and running bike I have ever owned. Its flat out awesome!
    2016-06-14 15:22:53
    Las Vegas, Nevada, United States
    3
    8,500.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
     2015 CCCC Custom Bobber,  Power supplied  by 113 inch ultima motor giving 120 HP to rear wheel, 2 inch old skool belt drive, 6 speed transmission, Soft tail frame, 3 inch under Springer, 2 1/4 up sweep exhaust, 200x18 rear wheel, 120x21 front wheel, all high pressure oil & fuel fittings. All controls are stone inlayed. This bike has only 3300 ,miles on it, health issues forces sale.
    2016-06-14 15:22:48
    Port Charlotte, Florida, United States
    3
    11,500.00
  • 1954 Custom Built Motorcycles Bobber1954 Custom Built Motorcycles Bobber (1954)
     HI UP 4 SALE 1954 g motor flathead total rebuild ///has chromed 4 speed trans ///has paugcho frame they make to accept this motor all done by paugcho not a cobb job //u buy frame //exh oil n gas tank//  sissybar////tranny mount //the open belt to made by bdl but paucho sells them everything fits perfect //has voodoo leefer front end //has brakes dual in the rear fab kevins set up //still has hand n foot controls both stop the rear brake //keeps front wheel clean //paint buy my painter n cali walteria //shines like no other //all else powdercoated not a scratc h on thib bike anywhere //foot clutch jockey ol scol shifting //new tires n wheels of course ///any questions 585 544 9924 anytime oh has open title n bill o sale too //eng cases match numbers //bike has no speedo //horn  // turn signals bare bones but can be added //it has headlight tailite n brake lite too //  rebilt gen n new regulator n battery is gel //new everything i could get  last thing shown with my buddy on the bike for reason he skinny dude 130 pounds 5 ft 8 n fits bike fine //perfect for a smaller guy or gal /the bikes very light weight n ez to ride //
    2016-06-14 15:22:41
    Rochester, New York, United States
    50
    23000
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    2006Dynamic ChoppersBobber - Pro Street SpringerGloss Black W/Real Fire Flames - See Pic'sThe Price of the bike reflects the fact that it has Never Been Titled!!  If it had Been Titled it would be for sale for Over-13K!!We Don't need to Sell this Bike, We Don't have to sell this bike, so It will relist until a REASONABLE offer is in place.***MOTORCYCLE HAS NEVER BEEN TITLED*****INCLUDES ALL MSO'S****++** Frame MSO, Motor MSO, Trans MSO, and Manufacturer's Statement Of Origin(Dynamic Choppers) **++**This is a Manufactured Motorcycle Built By Dynamic Choppers of Las Vegas Nevada With a Manufacturer's issued Vin #The Builders MSO has NEVER BEEN ASSIGNED so you will Technically be the First Owner. -*-Rev-Tech 110ci MotorRev-Tech 6-Speed TransmissionBDL 3" Belt DriveKrafttech Rigid Frame, 35deg. Rake and 2" Stretch.Fat-Kats Rear Fender - Modified.3.5 Gallon Stretched Tank W/Choppers Inc.
    2016-06-14 15:22:37
    Flandreau, South Dakota, United States
    200
    20000
  • 2003 Custom Built Motorcycles Bobber2003 Custom Built Motorcycles Bobber (2003)
    This bike is beautifully unique and in great condition.  Runs and rides great!  I just don't have a ton of time and space for it anymore, so I need to find it a good home.
    2016-06-14 15:22:35
    Shakopee, Minnesota, United States
    11
    4,500.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH VIN NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  VERY HARD TO GET RIGHT NOW MADE IN THE USA AT WEST COAST CHOPPERS AUSTIN TX LOCATION  NEW 3RD GENERATION WEST COAST CHOPPERS  CFL1 MODEL , WE HAVE WAITED 14 MONTH TO GET THESE NEW FRAMES AND THEY ARE REALLY NICE , NEW FRAME DESIGN , 3-D RADIUS AXLE BLOCKS , BILLET BATTERY TRAY , HOUR GLASS NECK, NARROW OIL TANK ,    2015 NEW STYLE CFL  200 TIRE , MADE AT AUSTIN TX LOCATION  LAST ONE IN STOCK  2015 WEST COAST CHOPPERS  4 UP CHOPPER  200 TIRE    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  ,38 DEGREE RAKE   ,4UP, 2 OUT ,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  41MM  FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5 ,21X2.25 BLACK WHEELS    ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   WCC GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  44 MAG RISER ( NOT WCC BRAND )  , MMW  BARS  ,  WCC BATTERY BOX , SET UP FOR FORWARDS OR MIDS  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2016-06-14 15:22:32
    Thousand Oaks, California, United States
    0
    7,900.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW COPPER HEAD  FAT SPOKE    26,26     BOARDTRACK RACER        2016 MMW COPPER HEAD FAT SPOKE    BOARDTRACK   26'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL   BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER      FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)26X3.5 , 26X3.5  MMW   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2016-06-14 15:22:30
    Thousand Oaks, California, United States
    0
    6,800.00

Kawasaki Mini Trail Price Analytics

Moto blog

2025 Kawasaki KLX230R / KLX230R S Review

Mon, 11 Nov 2024

Designed to inspire addiction Kawasaki would like to think it knows its customer possibly better than they know themselves, and anyone invested in bringing new riders into the sport understands the importance of setting them up for success. A new rider’s first steed should be approachable, forgiving, playful, price-conscious, and cool. Kawasaki has set out to offer the perfect bike on all fronts, and in my opinion, they have succeeded.

2025 Kawasaki KLX230R and KLX230R S Review Gallery

Mon, 11 Nov 2024

2025 Kawasaki KLX230R and KLX230R S Review Gallery | Motorcycle.com Join Now My History Account Settings Log out Specs Classifieds Bike Reviews Product Reviews Best Motorcycle Cameras Best Motorcycle Earplugs Best Motorcycle Oil Best Leather Jackets Best Winter Gloves Best Sportbike Tires GPS Buyers Guide Gear Deals Types Adventure Touring Cruiser Electric Off-Road On-Off-Road Other Scooter Sport-Touring Sportbikes Standard Touring Touring Scooter Track Youth Brands Aprilia BMW CFMoto Ducati Energica Gas-Gas Harley-Davidson Honda Husqvarna Indian Kawasaki KTM Kymco Moto Guzzi MV Agusta Piaggio Royal Enfield Suzuki Triumph Vespa Yamaha Zero Resources New Rider's Hub Dealers Safety Forums Videos Insurance Specs Classifieds Bike Reviews Product Reviews Best Motorcycle Cameras Best Motorcycle Earplugs Best Motorcycle Oil Best Leather Jackets Best Winter Gloves Best Sportbike Tires GPS Buyers Guide Gear Deals Types Adventure Touring Cruiser Electric Off-Road On-Off-Road Other Scooter Sport-Touring Sportbikes Standard Touring Touring Scooter Track Youth Brands Aprilia BMW CFMoto Ducati Energica Gas-Gas Harley-Davidson Honda Husqvarna Indian Kawasaki KTM Kymco Moto Guzzi MV Agusta Piaggio Royal Enfield Suzuki Triumph Vespa Yamaha Zero Resources New Rider's Hub Dealers Safety Forums Videos Insurance Join Now My History Account Settings Log out Edit & Post 2025 Kawasaki KLX230R and KLX230R S Review Gallery Nothing kills that new-rider enthusiasm faster than fear and intimidation, but a perfect first bike should also be fun and enabling, with enough guts to stay relevant as rider skill grows. Kawasaki reached that balance point on the new KLX230R/S models. Read the full story here.

2024 Kawasaki Z500 SE Review – First Ride

Tue, 14 May 2024

Displacement creeps alongside tech and styling updates Photos by Kevin Wing Every rider can fondly recall their first street motorcycle. Maybe it was a used 1980s “Honda Davidson” cruiser with miles of wear and tear. Or perhaps it was a shiny new lightweight sport bike, candy coated and bright like a Skittle.

2024 Kawasaki Ninja 500 Review – First Ride

Tue, 23 Apr 2024

Photos by Kevin Wing Photo/Kawasaki Kawasaki has been dominating the realm of entry-level motorcycles, especially with the introduction of the Ninja 400 in 2018. In fact, they were so capable and enjoyable to ride that I bought one myself and it has become one of my favorite motorcycles in my stable. The Ninja 400 wasn't perfect, and I had my gripes about it.

2024 Kawasaki KLX300/KLX300SM Review – First Ride

Mon, 18 Dec 2023

A winning formula gets even more… winning-er Photos: Kevin Wing Kawasaki’s media guy Brad Puetz (pronounced like the actor, though this Brad is not nearly as good looking or famous) said something that stuck with me. “Between the Versys 650 and this, these are the two bikes journalists tend to buy most from us.” As a previous Versys 650 owner – purchased from MO’s former Editorial Director Sean Alexander, and then passed down after me to another former MO staffer Tom Roderick, we can certainly attest to the first part. 2024 Kawasaki KLX300/KLX300SM Kawasaki has an unexpected success with the KLX300 and KLX300SM, so instead of massive changes for what's essentially an entry-level motorcycle, Kawasaki decided to make it look better.

2024 Kawasaki Ninja 7 Hybrid Review – First Ride

Tue, 31 Oct 2023

The world’s first production hybrid motorcycle has a lot to offer – but does it make any sense in America? Photos: Kawasaki Like it or not, regulatory agencies around the world are cracking down on vehicle emissions and imposing some of the strictest rules we, the motoring public, have ever seen. One of these rules includes restricting, or even banning, petrol-powered vehicles through portions of some European cities.

2024 Kawasaki Eliminator Review – First Ride

Wed, 13 Sep 2023

The Vulcan S Now Has A Sibling Once upon a displacement, 250 cubic centimeters was the unofficial beginner bike size of Japanese OEMs. Kawasaki upset that apple cart with the introduction of the Ninja 300 in 2013. Two years later, Honda and Yamaha responded with the CBR300R and YZF-R3, respectively.

2024 Kawasaki Ninja ZX-6R Review – First Ride

Mon, 11 Sep 2023

Minor tweaks for one of the last supersports still in the game. But is it enough? Photos: Kevin Wing In recent years, what it means to be a supersport motorcycle has gone through a dramatic change.

CARB Filings Hint at Updated Kawasaki Z650RS for 2024

Mon, 10 Apr 2023

Traction control and updated instruments expected The California Air Resources Board has issued an executive order for what we expect to be an updated Kawasaki Z650RS for the 2024 model year. The update is expected to be relatively minor, adding traction control to the Z650RS. The update would bring the retro RS model in line with the more modern-styled Z650 and the Ninja 650, both of which were updated with traction control for 2023, as well as the Versys 650 which received traction control in 2022.

How Much Power Does The 2023 Kawasaki Ninja ZX-4RR Make?

Fri, 03 Feb 2023

US-spec models may be significantly down on power We’ve been covering the Kawasaki Ninja ZX-4R for a while now, and even up until it was revealed this week, there was skepticism about whether the little four-banger would actually come to America. Join the Kawasaki Ninja ZX-4R Forum After the official announcement, the obvious questions came up: How much does it cost? How much does it weigh?

2040Motos.com © 2012-2025. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Motos User Agreement and Privacy Policy.

0.16 s, 5431 u