1972 Husqvarna Wr on 2040-motos

This is a 1972/73 Husqvarna WR250. The frame # is MJ xxxxx The motor # is 2032-0xxx. It is an MJ frame but has the ears added where the swingarm connects to the frame. Im not going to lie and tell you this was done by the factory to make a leftover 72 into a 73 although they did do this type of stuff, but I have no proof. I have went through the motor and replaced all bearings and seals and gaskets. Piston and bore is a standard size. All seals and bearings on front and rear wheels are new and the list goes on. New....front and rear tires and tubes...New Stainless spokes front and rear New grips..New kill button...New clutch cable and Frnt brake cable...New brake shoes frt & rear..New Fenders...New number plates...New Seat cover...New chain...New front and rear sprocket.. New seals and dust cover on front forks...New air filter, I think that's it. It is a 6 speed WR250. It does run and has plenty of spark. I have no oil in it and don't plan on starting it. The Tank has a few small dents in it and the inside has been creamed and no fuel since. The exhaust pipe is in great cond but one small dent where the kick start is (old Husky riders know why this happens). The silencer has been welded on the back side and the orig clamp is gone. This is not a complete re-furb but its is real close. This is a used race bike and has NO TITLE, NO WARRANTY, BILL OF SALE ONLY. I will except Pay Pal or Certified checks or even cash as long as it clears my bank first. Thanks