Find or Sell Motorcycles & Scooters in USA

1988 Honda Gold Wing on 2040-motos

US $4,250.00
YearYear:1988 MileageMileage:19 ColorColor: Blue
Location:

Wakarusa, Indiana, United States

Wakarusa, Indiana, United States
QR code
1988 Honda Gold Wing, US $4,250.00, image 1

Honda Gold Wing photos

1988 Honda Gold Wing, US $4,250.00, image 2 1988 Honda Gold Wing, US $4,250.00, image 3 1988 Honda Gold Wing, US $4,250.00, image 4 1988 Honda Gold Wing, US $4,250.00, image 5 1988 Honda Gold Wing, US $4,250.00, image 6 1988 Honda Gold Wing, US $4,250.00, image 7

Honda Gold Wing tech info

Engine Size (cc)Engine Size (cc):1,500 WarrantyWarranty:Vehicle does NOT have an existing warranty TypeType:Touring For Sale ByFor Sale By:Private Seller

Honda Gold Wing description

1988 HONDA GOLDWING GL1500 - I PURCHASED THIS FROM THE ORIGINAL OWNER SEVERAL MONTHS AGO WITH ONLY 19,141 MILES ON IT AND I AM FORCED TO RESELL IT DUE TO A JOB LOSS. *I AM ACTUALLY CONSIDERED THE SECOND OWNER SINCE I DID HAVE THE TITLE TRANSFERRED FROM THE ORIGINAL OWNER TO MYSELF.  I FOUND OUT I WAS NOT ABLE TO SELL IT UNLESS I TRANSFERRED THE TITLE TO MY NAME.  BUT SINCE I HAVE NOT LICENSED IT OR DRIVEN IT MUCH THE BIKE COULD BE LOOKED AT ESSENTIALLY AS A ONE OWNER.  IT IS ALL ORIGINAL - WITH - REVERSE - ORIGINAL TOOL KIT & OWNERS MANUAL - HAYNES REPAIR MANUAL - AIR HOSE - HEEL TOE SHIFTER - FRONT FLOOR BOARDS - DRIVERS BACK REST - PASSENGER ARM RESTS - CB - INTERCOM - RADIO/TAPE PLAYER WITH FRONT & REAR SPEAKERS - TRUNK RACK. I HAVE ONLY PUT ABOUT 50 MILES ON THE BIKE BUT IT RUNS GREAT, SMOOTH, FAST, QUIET AND VERY RESPONSIVE. UNFORTUNATELY I'VE LOST MY JOB SINCE PURCHASING IT AND MY WIFE SAYS IT HAS TO GO UNLESS I GET ANOTHER JOB. THAT HAS NOT HAPPENED YET. THEREFORE, I HAVE TO SELL IT TO PAY THE MORTGAGE. ITS EITHER LOSE THE BIKE OR LOSE THE HOUSE.

NOTE: THE ARE A COUPLE OF SMALL CRACKS IN THE PLASTIC SHROUD AROUND THE CB AND A SMALL PIECE OF PLASTIC BROKEN OFF BELOW THE CB. THERE IS ONE SMALL CRACK IN THE PLASTIC SHROUD AROUND THE RIDE PRESSURE CONTROL PANEL. YOU CAN SEE THESE IN THE PICTURES. THERE IS A SMALL SPLIT IN THE DRIVERS SEAT AS YOU CAN ALSO SEE IN THE PICTURES. ALSO, I NOTICED THAT SOME OF THE CONTROLS ARE STICKY AND SLUGGISH FROM SETTING IDLE FOR SO LONG SO I AM NOT COMPLETELY SURE THAT EVERY OPTION IS WORKING AT THIS TIME BUT EVERY OPTION IS PRESENT. SOME OF THE ACCESSORIES MAY NEED ATTENTION IN ORDER TO GET THE CONTROLS WORKING. FOR INSTANCE THE MUTE BUTTON IS SLOW TO POP IN AND OUT WHEN YOU PUSH IT. IT IS WORKING BUT IT IS SLUGGISH. I THINK YOU MIGHT BE ABLE TO SPRAY SOME WD40 IN IT AND GET IT TO RESPOND QUICKER. THE TIRES SEEM TO HAVE A DECENT AMOUNT OF TREAD ON THEM AS YOU CAN SEE FROM THE PHOTOS. I ALSO TOOK SOME PHOTOS OF A COUPLE OF CRACKS IN THE PLASTIC SHROUD AROUND THE CB AND THE RIDE PRESSURE CONTROLS. I ALSO TOOK A PICTURE OF THE SPLIT IN THE DRIVERS SEAT. I AM SELLING THIS AS IS SO I HAVE PROVIDED A LOT OF PICTURES. IF YOU NEED ANY OTHER PHOTOS OR HAVE ANY QUESTIONS JUST ASK. GOOD LUCK.

I TOOK THE FLOOR BOARDS AND HEEL TOE SHIFTER OFF AND INSTALLED THE OEM FOOT PEGS BECAUSE I AM NOT THAT FAMILIAR WITH RIDING WITH HEEL TOE SHIFTERS. THE FLOOR BOARDS AND HEEL TOE SHIFTER WILL COME WITH THE BIKE WHEN IT SELLS. 

THE BUYER IS RESPONSIBLE FOR VEHICLE PICK UP AND DELIVERY I WOULD BE WILLING TO ASSIST WITH TAKING THE MOTORCYCLE TO LOCAL SHIPPING FACILITY IF IT WOULD HELP. JUST CONTACT ME AND ASK IF YOU ARE CONSIDERING SOMETHING LIKE THAT. 

THE MOTORCYCLE IS BEING SOLD AS IS WHERE IS WITH NO WARRANTY SO IF YOU HAVE ANY SPECIFIC QUESTIONS PLEASE DO NOT HESITATE TO CONTACT ME AND CHECK OUT ALL OF THE PHOTOS. THIS IS A PRETTY RARE FIND FOR A 1988 GL1500 WITH ONLY 19,141 MILES SO DON'T PASS IT UP. 

I WILL ACCEPT A CASHIER'S CHECK OR CASH IN PERSON. IF YOU WILL BE PAYING WITH ANYTHING OTHER THAN CASH THEN I WILL HAVE TO WAIT ABOUT 10 DAYS FOR THAT PAYMENT TO CLEAR THE BANK BEFORE I CAN LET THE MOTORCYCLE LEAVE MY PROPERTY.

Moto blog

Honda CRF450R Gets Further Refined for 2014

Tue, 14 May 2013

The CRF250R received a significant update for 2014, including a new frame and dual-exhaust setup first introduced in the CRF450R  which itself received a substantial update year. The current-generation CRF450R may only be a year old, but that didn’t stop Honda from introducing a couple of refinements for 2014. For 2014, Honda had tweaked the engine, adding new intake and exhaust ports and a new dual-timing fuel injection setup.

K-Tech release 25SSK for Big Piston Forks

Mon, 21 May 2012

K-Tech have released their popular 25SSK front fork open cartridge system to fit all Showa Big Piston Forks. Here's what K-Tech have to say about them: These lightweight aluminium units are supplied to the same exacting specification as all other 25SSK fitments with 14mm piston rods and a 25mm cartridge tube, the 14mm piston rods displace a large volume of oil through the 25mm control pistons giving enhanced damping characteristics over the standard Big Piston Fork and allow a bigger volume of air for a more precise feel at the bottom of the fork travel. The cartridge kits have compression and rebound adjustment in both legs and are supplied with 1.5mm Flow Control Valves for a more accurate adjustment, all necessary hardware is supplied to convert the Big Piston Forks to take the cartridges but it is necessary to order the springs you require as these are not included, customer price for the 25SSK cartridges is £725.00 + VAT and are available for the following models:- Honda CBR1000RR 2012 Kawasaki ZX6-R 2009-2012 Kawasaki ZX10-R 2011-2012 Suzuki GSXR600 2011-2012 Suzuki GSXR1000 2009-2012 Contact K-Tech on: +44(0)1283 559007.

Honda introduced the new scooter PCX125

Sun, 01 Apr 2018

"Stool" received a fresh design, a more powerful engine, ABS and LED optics. A new generation of the model is presented, which will definitely interest the audience. The device has been completely upgraded.