-
2003 Custom Built Motorcycles Chopper (2003)
For sale is my 03 Springer Softail build.When I purchased the bike, the odo read 4 miles on the motor build.The previous owner did most of the body fab. After I took possession, I changed out the bars and cables, put new grips and pegs on, relocated the bar controls to other areas, swapped in a Mikuni 42mm carb, serviced the entire bike (gaskets, brakes, fluids, etc) and swapped out the fuel tank.This is titled RECO in the state of Minnesota for the custom build. I no longer ride this bike and it deserves to be ridden. The motor is a 96ci S&S build.2016-10-31 04:39:58Hopkins, Minnesota, United States216000 -
2008 Custom Built Motorcycles Chopper (2008)
2008 American Thunder Prostreet Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * *Top Line Information Year: 2008 VIN: 1D9SS64D28H251015 Make: American Thunder Stock: MSN3792 Model/Trim: Prostreet Condition: Pre-Owned Engine: 1638 cc Exterior: Black Transmission: manual Mileage: 14,200 VideoDescription This 2008 American Thunder custom Pro Street is in excellent condition with 14,200 miles on it. This low and long black and chrome beauty shows no signs that it has ever been laid down with two little imperfections found on it. There is a rub mark on the front brake lever and a small scratch on the front fender, where it looks like something was dropped on it.2016-10-20 04:39:21Eden Prairie, Minnesota, United States148,977.00 -
2015 Custom Built Motorcycles Chopper (2015)
This is a fresh built bobber with only about 150 miles on it , the mile are going up as we are driving it , 2015 chassis design frame and springer front , titled and built in 2016 , 113 ultima 6 speed ultima 2" ol school belt 23" fat spoke wheels Sprotor on rear House of kolor jet black with silver flake and red striping The bike runs , rides ,drives excellent Everything thing is new and very nicely done Check out the video http://youtu.be/7Tcyr8UuNLA Rivertownupholstery . Com2016-08-03 04:53:56Stillwater, Minnesota, United States15018,500.00 -
2003 Custom Built Motorcycles Chopper (2003)
Up for Auction is my beautiful eye catcher one of a kind 2003 Red Horse Custom Chopper Motorcycle It has a intense S&S 113CI Motor with 4400 miles on it this beautiful machine has a 6-speed transmission for a smooth ride it has a softtail chassis it also comes with a removable passenger pillion. This bike has the Dakota digital gages it has been professionally maintained and well taken care of. If you would like to see it in let's feel free to contact us we would gladly show it.2016-07-18 04:53:19Brainerd, Minnesota, United States414,000.00 -
2000 Custom Built Motorcycles Chopper (2000)
Professionally built by Donnie Smith. Stretched & Raked, 250 tire, Danny Gray Seat. Every nut, bolt and washer is chrome.2016-07-03 04:55:23Burnsville, Minnesota, United States1814,500.00 -
1982 Custom Built Motorcycles Chopper (1982)
this is a suzuki 1100 bore 3.5 mm over stock wiseco 10.5 to1 compretion 8 valve 3 angle job newer clutch kit new mirror rebuilt carbs frame is costum built the guy who built it is a dirt car chassi biulder. works for dirt duelers and is a cop he did the gas tank and the fender was done on a inglish wheel .the paint is house or colors I still have 500.00 in paint the bike needs a bike builders title all works perfect the resone im selling may have to have back surgery iv given up riding motorcycles and off road sport machines the only thing ive been doing for work is oil and tire jobs in the shop i love do not wast my time with junk offers THIS BIKE RIPS I HAVE DONE A 3 GEAR START BURN OUT NOWONE HOLDING THE FRONT TIRE WHILE SEATING ON THE BIKE the tank needs to be repianted a tree branch from are yard landed on it 507 313 8340 ther is no title2016-06-14 15:24:52Minnesota City, Minnesota, United States02,500.00 -
2003 Custom Built Motorcycles Chopper (2003)
2003 iron works rage st.has rev tech 100 motor was bored 30 over last spring rev tech polished 6 speed tranny,legend air ride suspension,had new alto clutch last summer,bike has a 42 deg rake 6 degree tree 8 up o a 2 inch down tube and a 5 outback bone.hydrolic clutch,rear tire is a Avon av72 cobra size 250/40 18 front is Avon also size mh 90-21.has a custom paint bike is very nice ride always gets looks no matter where it is2016-06-14 15:21:27Monticello, Minnesota, United States2017000 -
2005 Custom Built Motorcycles Chopper (2005)
2005 Red Horse "Mustang 250" - only 3,380 miles - LOW RESERVE - bid to win !! this bike is turn key ready - freshly tuned and detailed! Features: -100ci RevTech engine-Mikuni HSR45 carbuerator-Thunderheart electronics-Samson performance pipes-Avon Venom Tires - 250 rear -Progressive rear suspension -Dakota digital speedo & tach-billet and chrome controls As you will notice in the photos below, this bike has been impeccably cared for. In between rides, it was used for showroom display - always detailed and polished to impress. Red Horse Motorworks is a NADA recognized manufacturer , and was a premier builder of exotic choppers from 1999-2007 .This bike originally sold for $27,395!2016-06-14 15:19:15Buffalo, Minnesota, United States342000 -
Extreme Mini Chopper (2005)
One of a kind EXTREME MINI CHOPPER Completely hand-build and hand-machined Tecumseh Engine Automatic Transmission Electric Start Mag Wheels Blinkers TOP SPEED 50 MPH!!! This is a super fun little chopper! Seat height 14" Fork tube length 32" Check us out at www.indiantwincities.com *** Thinking about purchasing a new 2014 Indian Motorcycle?2013-10-22 00:53:30Saint Paul, Minnesota, US0760.00 -
Rooke style bobber , chopper , bar hopper (2012)
Custom bobber Chassis design co. frame and front end 113 Midwest ultima engine Midwest ultima 6 speed transOl school 2" belt drive w / hydraulic clutch250 rear tire BMW laser blue Bike runs n rides very good , 800 miles is an estimate , a definite attention grabber always draws a crowd , http://m.youtube.com/watch?v=qKnlc85CVFs2013-09-27 11:09:32Stillwater, Minnesota, US80012,000.00 -
2004 santee chopper (2004)
2004 chopper 100 cu rev tech 6 speed trans,lots of jessie james parts has less then 900 miles needs a good cleaning a mush see 3 inch belt drive cash only at pick up you can call me at 763--286--4141 is for sale in home town2013-09-26 23:16:47Buffalo, Minnesota, US9005,100.00 -
Custom Chopper GORGEOUS, LOUD, FAST, Head Turner!!!!!!!!!!!! (2002)
Up for sale is my beautiful custom chopper. This bike is a Rolling Thunder soft tail chassis. It is fully loaded and runs PERFECT AND STRONG!!!2013-10-22 00:38:43Lindstrom, Minnesota, US9,000500.00 -
Custom Chopper -- Paughco/Harley Davidson (2002)
Custom Chopper made by Blackstone Custom Motorcycles, Duluth, MN. Paughco FramePaughco Springer Front EndHarley Motor, 80 cubic inch, 1340ccHarley TransmissionSamson Outlaw PipesHarley Rims & TiresCigarette LighterArlen Ness Side Mirror (Left Side)Many more custom parts, see pictures2013-09-05 08:42:31Duluth, Minnesota, US3,0003,000.00 -
Custom mini chopper- mini bike- minibike- show bike (2005)
Made in USA by CMB custom mini chopper with polished front fork, polished solid rear wheel with Avon tire, polished custom billet 16" front wheel. Powered by a 195cc 6hp electric start tecumseh engine with chromed custom pipe. Has a comet tav 30 belt drive with polished cover. Gas tank started as a big chopper tank and was narrowed 3" to fit the bike. Has working headlight and led tail light. Welds on the frame were smoothed and molded, wires and cables were run through the frame when possible. Disc brake on the rear. Painted with Duplicolor spray can, cleared and buffed- looks nice. top speed approx 40-45 mph, total length approx 7', seat height 17", total weight approx 175lbs.---made for an average sized adult. Does NOT have a title. Please ask any questions before bidding. Must be picked up.2013-09-03 21:41:02Foley, Minnesota, US5250.00 -
Custom Steed Thoroughbred 2005 (2005)
2005/06 CUSTOM CHOPPER STEED THOROUGHBRED 300-CM WITH 124 CU IN S&S MOTOR. ONLY 5 STEEDS IN THE WHOLE MIDWEST. 7400 miles MADE IN SCOTTSDALE, AZ BAKER 6 SPEED LED HEADS UP INSTRUMENTS(ALL IN MIRRORS) MONO SHOCK FRAME 2 SEATS SINGLE AND DOUBLE TO TAKE THE LADY.2013-09-03 17:25:54Osseo, Minnesota, US7,48917,595.00
Harley-Davidson Roadking Price Analytics
Moto blog
5 Things You Need To Know About The Harley-Davidson Street Glide
Thu, 14 Nov 2024Photo by Francis Jun. Recently, the Motorcycle.com staff had the chance to tour the beautiful Ontario countryside to experience the fall colors and to get a taste of what Northern Ontario has to offer. It’s a stunning place, and we thank our friends at Destination Ontario for making it all possible.
2024 Harley-Davidson Hydra-Glide Revival Review
Tue, 03 Sep 2024A double dose of nostalgia Photos by Edward Narraca; Harley-Davidson Museum Archives I love classic Americana. Hot rods, choppers, you name it. It’s one of the things that make me proud to be from the place that this aesthetic was born.
2024 Harley-Davidson Hydra-Glide Revival Review Gallery
Tue, 03 Sep 20242024 Harley-Davidson Hydra-Glide Revival Review Gallery | Motorcycle.com Join Now My History Account Settings Log out Specs Classifieds Bike Reviews Product Reviews Best Motorcycle Cameras Best Motorcycle Earplugs Best Motorcycle Oil Best Leather Jackets Best Winter Gloves Best Sportbike Tires GPS Buyers Guide Gear Deals Types Adventure Touring Cruiser Electric Off-Road On-Off-Road Other Scooter Sport-Touring Sportbikes Standard Touring Touring Scooter Track Youth Brands Aprilia BMW CFMoto Ducati Energica Gas-Gas Harley-Davidson Honda Husqvarna Indian Kawasaki KTM Kymco Moto Guzzi MV Agusta Piaggio Royal Enfield Suzuki Triumph Vespa Yamaha Zero Resources New Rider's Hub Dealers Safety Forums Videos Insurance Specs Classifieds Bike Reviews Product Reviews Best Motorcycle Cameras Best Motorcycle Earplugs Best Motorcycle Oil Best Leather Jackets Best Winter Gloves Best Sportbike Tires GPS Buyers Guide Gear Deals Types Adventure Touring Cruiser Electric Off-Road On-Off-Road Other Scooter Sport-Touring Sportbikes Standard Touring Touring Scooter Track Youth Brands Aprilia BMW CFMoto Ducati Energica Gas-Gas Harley-Davidson Honda Husqvarna Indian Kawasaki KTM Kymco Moto Guzzi MV Agusta Piaggio Royal Enfield Suzuki Triumph Vespa Yamaha Zero Resources New Rider's Hub Dealers Safety Forums Videos Insurance Join Now My History Account Settings Log out Edit & Post 2024 Harley-Davidson Hydra-Glide Revival Review Gallery The latest addition to Harley-Davidson's Icons collection is actually a nod to two prior motorcycles. The Hydra-Glide name celebrates its 75th anniversary, dating back to the first hydraulic fork that was equipped to a Harley-Davidson, replacing the springer front end in 1949, while the “slash” fuel tank design, emblem, classic round air filter cover, two-toned windshield, seat, and cases, are all nods to the 1956 FLH. Read the full story here.
2024 Harley-Davidson Road Glide and Street Glide Review – First Ride
Thu, 22 Feb 2024New and improved and yet still the same. Everything’s going to plan. Photos: Brian J.
2024 Harley-Davidson CVO Road Glide ST Review – First Ride
Thu, 08 Feb 2024When racing improves the breed Photos by Brian J. Nelson You know the Harley CVO story by now. It starts with the highest-performing production bike The Motor Company can make, and then we see bits and pieces make their way down the standard production line in the years to come.
Hero Motocorp Teases Harley-Davidson-branded Model for India
Wed, 05 Apr 2023An Indian-made air-cooled Single-cylinder Sportster? Harley-Davidson and Hero Motocorp announced a partnership back in 2020 for the distribution of existing Harley motorcycles and the development of a new range of models for the Indian market. We haven’t heard much from that arrangement… until now, when a selection of “spy photos” of a Harley-Davidson-branded motorcycle with a 400-ish cc Single landed in the hands of the Indian press.
Harley-Davidson's New 121ci CVO Engine Has VVT
Thu, 16 Mar 2023Another leaked image reveals more secrets A couple of days ago, we were tipped off by Harley-Davidson blogger Dr. Dan Morel about photos of an alleged new CVO Road Glide and CVO Street Glide taken from the factory floor. Morel has since sent us another photo, offering a clear look at the CVO Road Glide’s right side, including evidence that the new 121ci engine uses variable valve timing.
2023 Harley-Davidson CVO Road Glide and CVO Street Glide Leaked
Tue, 14 Mar 2023CVOs receive 121ci engine, new fairings and inverted forks Harley-Davidson released the bulk of its 2023 lineup about two months ago, but we’re still waiting to here about more models, such as the Custom Vehicle Operations models that will be joining the CVO Road Glide Limited Anniversary. We may not have much longer to wait, as videos of a new CVO Road Glide and CVO Street Glide have popped up on line, revealing some big changes to the CVO models, and perhaps a sign of what to expect for the 2024 lineup. Blogger Dr.
2023 Harley-Davidson X 350 Revealed for China
Fri, 10 Mar 2023H-D/QJ Motor connection finally bears fruit Harley-Davidson has officially revealed the X 350 for the Chinese market, a small displacement flat track-inspired roadster produced with Qianjiang Motor (QJ Motor). As of this writing, the X 350 is only confirmed for China, though a modified variant known as the X350RA will be used in Harley-Davidson Rider Academy programs in the U.S. QJ and Harley-Davidson have been working on the X 350 since 2019, though the motorcycle traces its lineage a little earlier to the TNT300 from QJ-owned Benelli.
Five Takeaways from Harley-Davidson's Q4 2022 Results
Thu, 02 Feb 2023Del Mar delays, Project Fuel and the X350RA Harley-Davidson presented its fourth quarter 2022 financial results, and the results were generally strong, but not without a few hiccups. The quarter was strong, compared to the previous year, with revenues ($1.14 billion vs $1.02 billion), operating income (profit of $4 million vs loss of $7 million) diluted earnings per share ($0.28 versus $0.14) showing increases in 2022. For the year, Harley-Davidson reported revenues of $5.76 billion compared to $5.34 billion in 2021, and an operating income of $909 million compared to $823 million in the previous year.