Desperado Neck Warmer Motorcycles in California

Solid Brass Fuel Valve with Chrome plating and 10x1.mm threads. This valve has 3 positions ON/OFF/RESERVE with a 5mm hose fitting. Used on lots of small Italian bikes: Ducati singles, Gilera, Motobi, Benelli ETC...

NOS with 45-degree float.  USED 20-degree float (suitable for Ducati) also included, see last photos. Choke lever isn't connected to anything.

Actually Benelli, but I've sold hundreds without issue.  Condition is perfect, length about 28" / 700mm.  While it may be a wee bit long, it should be suitable for most Ducati single with Veglia or similar speedometer, but please check your own application to be certain.

Used on various Italian machines of the '70s and early 80s.  Full set of FOUR, condition perfect, excellent COPY of the 173 CEV. I will answer questions promptly, good luck and thanks for looking.

NEW PRODUCTION, Dellorto number 2993.  To suit the earliest and smallest remote-float Dellorto carbs, such as the UA shown in 2nd photo.  Dimensions of stack 50mmL x 40mmW.

Chain operated with one piece alliy body. Will work on many vintage bikes.

 Nice looking original pair of 70's era Benelli 250 2C muffler tips with mounting rings. There is also pair of baffles (one side missing a part). Muffler tips look good, not rotted out.

As used on many Italian machines of the '70s.  This version is chrome, bare body without reflectors, the earliest style.  Guzzi part number would be 1775-1652.

Brand new, never been on a machine.  The iconic donkey dick (sorry) grips of the seventies.  Condition is perfect, the listing is for one pair-clutch side/throttle side.  They are suitable for 7/8" handlebars. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:20:10 PST, seller added the following information: Buyers please note:  If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice.  Ebay's shipping calculator is terrible and I ALWAYS combine shipping when possible for the cheapest cost to you.

Italian made Fuel Valve for bikes with 16 X 1.0mm Male threads on there Gas Tanks. This freshly made Fuel Valve has a 8mm hose fitting and angles in at 90 Degrees. The Fuel Valve has Three positions ON/OFF/RES and the lever is black plastic.

Just in from Italy freshly made Benelli "Logo" foot peg rubber set for vintage models with 14mm round pegs. Peg rubbers measure 14mm inside with a flat spot on the sides. Rubbers are 110mm (4 3/8") long and please look at the photo of the inside part of the rubbers to make sure they will fit on your foot pegs.

New production, imported from Italy, suitable for MANY Italian motorcycles from about 1975 through the eighties and beyond. Flip top, LOCKING with key set shown, satin chrome finish similar to stainless.  Beautiful.

New in box, suitable for all Ducati single with battery igintion, to my knowledge.  Replaces Ducati part number 0400-31-303. Imported from and made in ITALY, the real deal, step right up.

 Nice looking original pair of 70's era Benelli 250 2C side covers with badges. Side covers are in good shape, no dents or damage. plastic badges are undamaged as well.

As used on many Italian machines of the '70s.  This version is chrome, bare body WITH reflectors, the later style.  Guzzi part number would be 2375-0680.

Just in from Italy freshly made Benelli logo grips. These grips can be used on lots of Benelli singles of the 1950's and 60's: 90/100/125/175/200/250/350cc. Grips are 115mm long and fit 7/8' handle bars or clip-ons.

rare Nos dellorto shb 25 22 CARB VESPA MUSTANG DUCATI BENELLI MORINI DESMO MOTO GUZZI- this carb is nos never used  I bought it it was missing the bowl I never found an now one you can buy a reproduction on eBay for this rare carb I have included a used one this is a super rare carb ex specially in nos condition 

As fitted to most British machines from about '68-to-'73, inline with the front brake cable, to actuate the brake light.  Adaptable to other machines for that purpose, if you're building your own cable... Note that Italian cables are generally quite 'fat', and cable end ferrule might conflict with spade connectors without proper insulation or clearance.

A brilliant complete taillight assembly from Italy, suitable for anything you want to mount it to.  Similar to the 3-point setup fitted to Italian machines from about 1974, but would easily retrofit to something earlier, and would look swell.\ Chrome body, 12V. I will answer questions promptly, good luck and thanks for looking.

So far as I know, this cap should fit most Guzzi models, single or twin, until the Tonti frames, so long as your tank has the recess for the mounting ring.  The cap is a beauty, absolutely rust-free and the rubber is nice and pliable.  It's almost too pretty to use.  It will likely fit lots of other Italian models, but the narrow part of your gas cap opening must be less than 44mm, according to my research.  The later caps with the lettering have a wider tang for those tanks and are quite a bit more common, I think. Good luck and thanks for looking. On Feb-17-10 at 18:38:16 PST, seller added the following information: Buyers please note:  If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice.  Ebay's shipping calculator is terrible and I ALWAYS combine shipping when possible for the cheapest cost to you.

125 Poster.   This is NEW  in Black & White It measures 24 x 18 inches and is made on a heaver than normal poster quality glossy paper. This will ship in a sturdy box. Please read below!

1967 Benelli 350 / completely stock with everything original / 129 original miles / asking $3950 obo / This is a classic bike museum quality / call Paul at 714-717-4874 / includes original Pirelli tires with air