-
2012 Custom Built Motorcycles Bobber (2012)
RODS & RIDES 330 DROPSEAT BOBBER The Dropseat Bobber is what put Rods & Rides on the map. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front tire and the outrageous 330mm rear gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.2016-12-05 04:42:21Saint Louis, Missouri, United States017,750.00 -
2012 Custom Built Motorcycles Bobber (2012)
2012 CUSTOM BUILT BOBBER * S&S 110' MOTOR* 5 SPEED TRANSMISSION* 60 SPOKE FRONT WHEEL* SOLID ALUMINUM RER WHEEL* RIVERA OPEN BELT PRIMARY* FLAT BLACK PAINT* REAR SPROTOR* ONE OFF MEXICAN BLANKET SEAT* BUILT WITH THE BEST OF EVERYTHING LOW RESERVE2016-11-26 04:53:27Pompano Beach, Florida, United States34821000 -
2012 Custom Built Motorcycles Bobber (2012)
2012 South Side Kustom Bobber (includes everything but ENGINE)normal nicks and scratches, needs some wiring help but a new in box ultama wiring harness is includedTHIS BIKE HAS NO ENGINE!! I REMOVED A 96CI S&S, IT INCLUDES EVERYTHING SEEN IN PICTURES EXCEPT THE MOCK UP ENGINE USED TO SHOW THE COPPER !!!V-TWIN SPRINGER FRONT END - NEW THIS SPRINGCOMPUFIRE HIGH TORQUE STARTER- NEW THIS SPRINGULTAMA WIRING HARNESS - NEW IN BOXULTAMA 6 SPEED ULTAMA 2" OPEN PRIMARYDYNA ADJ IGNTION S&S SUPER E WITH INTAKEBATTERYNOTE: THIS WAS A RIDING BIKE 3 WEEKS AGO, I DONT TRUST THE WIRING AS STATED ABOVE, THE PICTURES SHOW AN ENGINE THAT IS NOT INCLUDED THIS IS LOCAL PICK-UP ONLY2016-11-02 04:42:56Altoona, Pennsylvania, United States03,700.00 -
2012 Custom Built Motorcycles Bobber (2012)
NO RESERVE Info: This is a practically new Custom Bobber built at Southern Motorcycle, Inc with a CLEAR State Title. Not a garage built or personal built custom, we built it here in our facility by certified technicians, and titled in the state of Oklahoma. The parts used to make this bike are 90% USA made from Leading Manufactures, and we listed the major parts below. We used this motorcycle mainly as a advertisement and display bike for our wheels, rotors, forward controls, and engine. It has less than 500 miles on the bike. We are putting it up for auction because we have new projects and advertisements we are doing. The value of the bike is estimated at above $20,000, but we are auctioning it off with NO RESERVE Here is a parts list: Kraft-Tech Frame 28 degrees with FXR swingarm (USA) 127ci Southern Proof Engine with S&S Carb (USA) 3" BDL Open Belt Drive (USA) Terry Components starter (USA) 6-speed AU Transmission (Korea) Progressive Rear Shocks (USA) GMA Controls (USA) HHI Brake Calipers, brackets, and HW (USA) Goodrich lines and cables (USA) USA made leather seat, dash cover, and grips (USA) Southern Black Contrast Octane Wheels, rotor, and sprocket (USA) Southern Black Contrast Forward Foot Controls (USA) Midwest Front End forks and trees (Taiwan) Avon Tires 150/18 front and 200/18 rear (USA) Dakota Digital Speedo and pick-up (USA) USA made wiring harness (USA) Two tone Black Paint (gloss on the bottom and matte black on top and sides) How it Rides: The motorcycle rides great (probably the best custom we have rode). It sits low to the ground, but handles good on corners, but does not lean like a Softail or Sporster. It has beyond enough power, maybe too much. Condition of Motorcycle: We guarantee everything is in good working order at the time of purchase with NO DAMAGE. As with any custom bike, it is like owning a race car, just requires more maintenance and up keep. The motorcycle is sold as is only. If you ever need parts, they are easy to find or you can get them through Southern Motorcycle, Inc.2016-08-16 04:58:13Ardmore, Oklahoma, United States50023000 -
2012 Custom Built Motorcycles Bobber (2012)
I have a 2012 bobber for sale that was built by Capones Customs out of Shelbyville Indiana. Has a 107 ultima motor with 6 speed ultima tranny. Very low hours!!2016-06-16 05:06:08Toledo, Ohio, United States212616 -
2012 Custom Built Motorcycles Bobber (2012)
Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.2016-06-14 16:00:49Petaluma, California, United States19,900.00 -
Custom bobber (2012)
2012 custom bobber has a S&S motor 88 ci completely rebuilt. 6 speed ultima tranny new and a ultima 3 in open belt primary new. New paint and new tires and new set of hooker pipes nice and loud.2014-01-02 10:14:15Ocala, Florida, United States7506500 -
Aspt clear (2012)
2012 custom bobber S&S 88ci motor completely rebuilt from bottom to top. Ultima 6speed tranny new . Has a new ultima 3 in open belt primary .2014-01-02 09:53:58Ocala, Florida, United States7506500 -
2012 bobber , chopper, rooke , bar hopper , hardtail , (2012)
2012 rooke style bobber 113 Midwest ultima 6 spd ultima 2" ol school belt 250 rear This bike was finished mid summer 2012 and has estimated 500 miles on it , runs and drives perfect , The orange chopper in the last picture could also be had for $14,000.002013-10-22 00:56:44Stillwater, Minnesota, US50010,000.00 -
custom bobber (2012)
Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.2013-10-20 00:01:43North Hollywood, California, US5003,000.00 -
2012 CUSTOM CHOPPER / BOBBER (2012)
2012 COMPLETE CUSTOM BOBBER 113 S&S MOTOR MOTOR IS BUILT WITH ALL S&S PARTS. S&S SUPER G CARBURETOR ULTIMA 6 SPEED TRANS ULTIMA IGNITION SYSTEM. THE BIKE WAS JUST COMPLETED IN OCTOBER 2012.2013-09-27 13:10:55Rancho Cucamonga, California, US2010,900.00 -
2012 Bobber bobber Custom (2012)
2012 Bobber bobber, Just built. 113ci S&S motor and much more!2013-09-05 07:57:40Montclair, CA, US018,900.00 -
HARLEY DAVIDSON BOBBER ROLLER CHOPPER MOTORCYCLE BUILDER (2012)
Bad Azz custom build! I call this bike "Twisted Medal". It is a ONE OF A KIND! Comes with certificate of origin This bike is begging for a shovelhead or an Evo motor and kick start transmission. Fenders are custom with twisted struts and twisted front fork brace/fender mount. 2012 Kraft/Tech Rigid Frame quality manufactured in the USA 30 degree rake 0 down tube stretch colors are red and black wide glide front end painted black lowers painted aluminum triple trees 1-1/2" chrome handlebar risers spring solo saddle with tank, pegs, bars, wheels, tires, and kick stand headlight is old school 1955 Chevy pick up tail light is altered for LED low slung solo seat with brass plated hairpin springs 15", 1-1/2" custom made fatty ape hangers - drilled and dimpled will accept Harley controlls painted triple trees and lowers - gives the bike that bad boy look paint that is on bike for display purposes, can be repainted comes with new rear wheel and old school back tire/new comes with used front wheel and tire with old school tire comes with used brake rotors minor rusting on front spokes that will clean up with steel wool oil tank/battery box custom made with twisted metal trim new gas tank with custom twisted metal trim custom made twisted pegs custom made twisted fender struts custom made twisted metal on fuel tank custom made twisted metal on oil tank trimmed in brass hardware All twisted metal parts were custom made by me (metal blacksmith) Add motor, transmission, turn signals, wiring and it's ready to go.2013-09-27 22:46:19Franklin, Georgia, US02,400.00 -
CUSTOM BUILT HARLEY DAVIDSON SPORTSTER BOBBER (2012)
Selling my custom built bobber. Hardtail with springer front. Satin black and red paint.2013-09-05 08:43:41Clarksville, Tennessee, US5003,351.00 -
2012 Sucker Punch Sally Bobber (2012)
2012 Sucker Punch Sally 66 Bobber Original owner and purchased from a Sucker Punch Sally Dealer Mileage - 254 Engine - S&S Harley Davidson Evolution Type ohv 45 Degree V-Twin Carburetor - S&S Super E Displacement - 81.6 Cubic Inch 1340cc Bore & Stroke - 3.498 x 4.250 Compression Ratio - 8.5 to 1 Fuel Capacity - 2.25 Gallons Oil Capacity - 3 Quarts Transmission - 6 Speed RevTech Primary Drive - Belt Final Drive - Chain Dry Weight - 495 Lbs. Frame - 30 Degrees No-Stretch Rigid Frame Front Suspension - 41 mm Telescopic with Pro-One lowers Seat Height - 24 Inches Ground Clearance - 4 Inches Wheelbase - 65 Inches Front Brake - Four Piston Rear Brake - Four Piston Front Tire - 16 inch Rear Tire - 180/60vb-16 Ignition - Dual Fire Electronic Message or email for any further details2013-09-05 01:04:33Liberty, Kentucky, US25414,350.00 -
2012 Harley Rat Rod Bobber (2012)
THIS Bobber built for advertisment and promotion af a famous clothing company. " TRUE RELIGION SPRING 2012 - THE REBEL " Check this web site ! http://www.youtube.com/watch?v=kkXdqguDYxU AND IT IS LOUD, FAST, AND FUN TO RIDE.2013-09-03 03:57:18Gardena, California, US5008,900.00 -
Harley Davidson 103 Motor (2012)
Harley Davidson 103" Twin Cam Motor Baker 6 Speed RSD Transmission Rolling Thunder Frame (Heavy Duty Great Frame) ! Springer Front End- Works Awesome ! Rides Great for a Rigid with spring seat and big tire ! 300 Rear Tire Ride Wright Custom Wheels (Black w/ Gold Spokes) No Paint ! It looks so cool like this I never took it apart to paint it ! No turn signals !2013-09-03 03:49:20Medina, Ohio, US5008,000.00
Can-Am Spyder RS Price Analytics
Moto blog
2015 Can-Am Spyder F3 Revealed
Wed, 24 Sep 2014Bombardier Recreational Products has revealed the F3, the newest member to its three-wheeled Can-Am Spyder roadster family. Sporting a more muscular stance and the all-new UFit customizable footpeg and handlebar system, the F3 joins the returning Spyder RT, ST and RS in the 2015 product lineup. Duke’s Den – That’s Not A Motorcycle!
Can-Am Announces 2015 Spyder F3 and Biketoberfest Contest
Wed, 03 Sep 2014Can-Am/BRP has just taken the (photographic) wraps off the 2015 Can-Am Spyder F3! Although little official information is available, we can take some educated guesses based on what we can see in this photo plus the spy shots we published a couple weeks ago. The new, more aggressive front end prominently features a radiator grill, which we expect will provide the increased cooling required by a beefed up version of the liquid-cooled Rotax 1330 ACE in-line 3 cylinder mill currently powering the Spyder RT tourer.
NHTSA Launches Recall Look-up by VIN Tool
Fri, 22 Aug 2014The U.S. Department of Transportation and the National Highway Traffic Safety Administration have launched a new free online tool that should make it easier for consumers to inspect their vehicles’ safety recall histories. The new search tool, available at http://www.safercar.gov/vinlookup, allows people to look for recall campaigns by entering Vehicle Identification Numbers.
Scorpion V-Rod Reverse Trike
Wed, 20 Aug 2014There’s a lot going on in the world of three-wheelers. From Can-Am’s Spyder to Polaris’s Slingshot, and Travertson’s recently announced Striker, we have a sudden abundance of reverse trikes from which to choose. Joining the fray early next Spring is Scorpion.
Polaris to Reveal Slingshot Three-Wheeler on July 27
Mon, 30 Jun 2014Polaris Industries is set to reveal a new three-wheeled roadster on July 27 called the Slingshot. Polaris has been working on this project for quite some time. The photographs in this post were actually filed on Sept.
NFL Quarterback Drew Brees Endorsing The Can-Am Spyder + Video
Mon, 19 May 2014Danica Patrick. Mark Messier. Drew Brees. Apart from being star athletes in their respective sports, what else do these three have in common?
NHL Legend Mark Messier Makes Prediction About Can-Am Spyder + Video
Thu, 03 Apr 2014Canadian company Bombardier Recreational Products (BRP) has an ongoing relationship with the National Hockey League (NHL), and it’s latest iteration has sports legends telling how much they like riding Can-Am Spyders. An earlier video had NASCAR racer Danica Patrick riding the Spyder around Charlotte Motor Speedway. Well, not BRP has tapped six-time Stanley Cup champion Mark Messier to use his own special technique to reach out to potential riders.
2013 US Motorcycle Sales Data
Tue, 04 Feb 2014The Motorcycle Industry Council (MIC) reported a modest 1.4% growth in U.S. motorcycle and scooter sales in 2013, with consumers purchasing 465,783 vehicles. The sales data represents numbers from the MIC’s member brands which include BMW, Can-Am, Ducati, Harley-Davidson, Honda, Kawasaki, KTM, the Piaggio Group (which includes Aprilia, Moto Guzzi and Vespa), Victory, Suzuki, Triumph and Yamaha.
Now Available: Five-Lug Wheel Adaptors For Can-Am Spyders
Thu, 30 Jan 2014From the “Answer To Question Nobody Asked” department comes this: wheel adaptors for the Can-Am Spyder to allow more conventional five-lug wheels to replace the standard three-luggers. Available from C & S Custom. C & S says the adaptors are a direct fit onto the existing Spyder hubs, and can accept a 5mm x 114mm bolt pattern which is common on many small cars.
2013 Long Beach International Motorcycle Show Report
Fri, 06 Dec 2013Today the motorcycle press descended upon the Long Beach Convention Center to attend media day at the annual International Motorcycle Show. After feasting from a continental breakfast buffet the discerning journalists set to the task of reporting on the bounty of new model motorcycles – most of which has been previously showcased in our November EICMA reporting. If you missed anything from that show here’s a run down of what to look forward to: Triumph Thunderbird LT Suzuki V-Strom 1000 Can-Am Spyder Royal Enfield Continental GT Zero KTM Super Duke R – KTM confirmed the retail price to be $16,999 BMW R NineT Ducati Monster S 1200 Honda Valkyrie Kawasaki Z1000 Husqvarna A cool item of interest included a reproduction TZ750-powered flat tracker King Kenny Roberts made famous.