Find or Sell Motorcycles & Scooters in USA
  • 2003 Honda XR2003 Honda XR (2003)
    I rebuilt this a few years ago and it needs nothing - ready to ride. Local Honda did all the engine work and i did the trans with mainshaft, shifter forks, 1st and 2nd gears. clutch.
    2024-06-25 00:41:28
    Byron Center, United States
    2,121
    2,500.00
  • 1974 Honda XR1974 Honda XR (1974)
    1974 Honda XR75Up for auction is a 1974 Honda XR75. Starts and runs as it should. The bike was torn down to the frame and partially restored by our service department.
    2016-08-11 04:48:02
    Williamsport, Pennsylvania, United States
    0
    5400
  • 1973 Honda XR1973 Honda XR (1973)
     For Sale Is My Amazing First Year Rubber Grey & Red 1973 Honda XR75 K0.  This XR75 Is Stunning In Its 99% Original Condition With Only A Rear Tire & Hand Grips Change.  This Is A Super Low Hour Bike.
    2016-06-18 04:45:57
    Choctaw, Oklahoma, United States
    100
    6200
  • 1973 Honda XR75 Beautifuly Restored to Original , Matching Numbers1973 Honda XR75 Beautifuly Restored to Original , Matching Numbers (1973)
    Up For Sale Is  A  1973 Honda XR75 Thi bike is completly restored to better than new All new engine  ,  top end  ,  clutch. engine #  XR75E- 1010312 All black componets like,     Frame , Swing Arm, Air Box, Triple Tree, Lever Perches,Seat Pan,  Footpegs, Motor Mount, Chain Guard, Have been sand blasted  Then Powder coated 60% Gloss Black Gas Tank has been Hot Tanked , Fenders, Side Plates & Gas Tank,   have been prepped  and  primed with PPG  epoxy primer   then  Color Coated  with PPG  Then 3 Coats of non yellowing High end PPG Clear Coat Perfect Original Kill Switch, Very Nice One Year Only Throttle Brand New After Market Very High Quality Seat;      Seat Cover has been made locally  with Heavy Duty Vynil ,   With Stenciled on Honda Logo,     New seat Foam On freshly Powder Coated Seat Pan  All hardware : Fender Brackets ,  Nuts and original,  perfect Bolts , Rear Brake Rod , Rear Brake Pipe,  has been hot tanked and Zinc Plated  New Parts :  Gas Cap , Fuel Stop,  Levers , Kick & Shift Rubber,   Grips,  Lever Dust Covers, Perch Plugs, Cables, Rubber Grommets Throughout, Spark Plug, Points, Valves, Piston& Rings, Gaskets,Air Filter,  Chain,  Spark Plug Wrench (under seat), New Front Number Plate, Decals, IRC Tires , Tubes, Rim Bands, Spokes, Rims,  Brake Shoes, Wheel Bearings & Seals,  Perch Bolts etc....................... All Aluminum has been High Polished :  Intake Manifold, Hubs,  Backing Plates, Fork Legs, Points Cover, Valve Cover, Re Chromed : Handle Bars, Kick Starter,  Shifter,   Front & Rear  Brake Arms, Cable Guide,  Asking 4500.   The least I have ever sold one was 4250.00  and the most was 5500.00   I am building 6 bikes for one customer now  and several to build and sell like this one and the flat track xr  I also haved a Beautiful 1975 YZ80 A    that is Excellent  Restored to Original Condition  That is ready to list I  also pictured a 1980 YZ80G  and a Z50A   That  I just finished for a customer "That are not for sale" "Buyer is responsible for all shipping and shipping cost" Shipping to Australia " Shipping Port" is 700.   with crate Ask for other shipping quotes and details   916 833 1857         
    2013-10-18 00:19:33
    Sacramento, California, US
    10
    4,500.00

Can-Am Maverick Price Analytics

Moto blog

2015 Can-Am Spyder F3 Revealed

Wed, 24 Sep 2014

Bombardier Recreational Products has revealed the F3, the newest member to its three-wheeled Can-Am Spyder roadster family. Sporting a more muscular stance and the all-new UFit customizable footpeg and handlebar system, the F3 joins the returning Spyder RT, ST and RS in the 2015 product lineup. Duke’s Den – That’s Not A Motorcycle!

Can-Am Announces 2015 Spyder F3 and Biketoberfest Contest

Wed, 03 Sep 2014

Can-Am/BRP has just taken the (photographic) wraps off the 2015 Can-Am Spyder F3! Although little official information is available, we can take some educated guesses based on what we can see in this photo plus the spy shots we published a couple weeks ago. The new, more aggressive front end prominently features a radiator grill, which we expect will provide the increased cooling required by a beefed up version of the liquid-cooled Rotax 1330 ACE in-line 3 cylinder mill currently powering the Spyder RT tourer.

NHTSA Launches Recall Look-up by VIN Tool

Fri, 22 Aug 2014

The U.S. Department of Transportation and the National Highway Traffic Safety Administration have launched a new free online tool that should make it easier for consumers to inspect their vehicles’ safety recall histories. The new search tool, available at http://www.safercar.gov/vinlookup, allows people to look for recall campaigns by entering Vehicle Identification Numbers.

Scorpion V-Rod Reverse Trike

Wed, 20 Aug 2014

There’s a lot going on in the world of three-wheelers. From Can-Am’s Spyder to Polaris’s Slingshot, and Travertson’s recently announced Striker, we have a sudden abundance of reverse trikes from which to choose. Joining the fray early next Spring is Scorpion.

Polaris to Reveal Slingshot Three-Wheeler on July 27

Mon, 30 Jun 2014

Polaris Industries is set to reveal a new three-wheeled roadster on July 27 called the Slingshot. Polaris has been working on this project for quite some time. The photographs in this post were actually filed on Sept.

NFL Quarterback Drew Brees Endorsing The Can-Am Spyder + Video

Mon, 19 May 2014

Danica Patrick. Mark Messier. Drew Brees. Apart from being star athletes in their respective sports, what else do these three have in common?

NHL Legend Mark Messier Makes Prediction About Can-Am Spyder + Video

Thu, 03 Apr 2014

Canadian company Bombardier Recreational Products (BRP) has an ongoing relationship with the National Hockey League (NHL), and it’s latest iteration has sports legends telling how much they like riding Can-Am Spyders. An earlier video had NASCAR racer Danica Patrick riding the Spyder around Charlotte Motor Speedway. Well, not BRP has tapped six-time Stanley Cup champion Mark Messier to use his own special technique to reach out to potential riders.

2013 US Motorcycle Sales Data

Tue, 04 Feb 2014

The Motorcycle Industry Council (MIC) reported a modest 1.4% growth in U.S. motorcycle and scooter sales in 2013, with consumers purchasing 465,783 vehicles. The sales data represents numbers from the MIC’s member brands which include BMW, Can-Am, Ducati, Harley-Davidson, Honda, Kawasaki, KTM, the Piaggio Group (which includes Aprilia, Moto Guzzi and Vespa), Victory, Suzuki, Triumph and Yamaha.

Now Available: Five-Lug Wheel Adaptors For Can-Am Spyders

Thu, 30 Jan 2014

From the “Answer To Question Nobody Asked” department comes this: wheel adaptors for the Can-Am Spyder to allow more conventional five-lug wheels to replace the standard three-luggers. Available from C & S Custom. C & S says the adaptors are a direct fit onto the existing Spyder hubs, and can accept a 5mm x 114mm bolt pattern which is common on many small cars.

2013 Long Beach International Motorcycle Show Report

Fri, 06 Dec 2013

Today the motorcycle press descended upon the Long Beach Convention Center to attend media day at the annual International Motorcycle Show. After feasting from a continental breakfast buffet the discerning journalists set to the task of reporting on the bounty of new model motorcycles – most of which has been previously showcased in our November EICMA reporting. If you missed anything from that show here’s a run down of what to look forward to: Triumph Thunderbird LT Suzuki V-Strom 1000 Can-Am Spyder Royal Enfield Continental GT Zero KTM Super Duke R – KTM confirmed the retail price to be $16,999 BMW R NineT Ducati Monster S 1200 Honda Valkyrie Kawasaki Z1000 Husqvarna A cool item of interest included a reproduction TZ750-powered flat tracker King Kenny Roberts made famous.