Bultaco Matador SD Motorcycles in California

2005 Custom built Captain America Motorcycle. A part of Americana

Up for sale is a 2015 special construction.  21" front wheel, inverted front end , custom frame, custom tanks, 113 " motor polished, 6 speed tranny, open belt drive, rigid, 300 rear tire, black paint w/ art work.  Any questions feel free to email me @ Nickellscustoms@comcast.net.You can also reach me at my cell phone at (209) 323-0090. 

chopper rev tech revtech V twin Harley  like new fresh custom //  this came to me as payment for a shop bill  looks like it has hardy been ridden  any miles, lots of revtech stuff sounds like all biz ness I was told its a Paul Yaffee bike ? clear title current reg I love this bike but have no health insurance its best I stay off of it, possible  trade up or down for sports car muscle car street rod cash $$$$ is best thanks for looking / pictures should be my best description interested pick up the phone and call 805 910 8094  ignore the buy it now figure, someone's going to get a deal,  keep a eye on my upcoming auctions currently liquefying some of my 30+ year hoard IF YOU DON'T YOU MAY BE MISSING OUT ? terms   sold as is   for overseas and local buyers I can help with contact info for reliable shippers / I have more pictures including the ones on ebay  / payment terms $500 pay pal in 24 hours for deposit balance in full in 7 days  via cash in person, bank wire, cashier's check / Thanks for looking 

 2005 Bad Island Toyz full custom chopper with less than 6 original miles. Built by Wayne Barreto. Engenuity 120 c.i.

This is a 2003 vangeance,as you can see in the picture it has a ton of chrome on it.frame is powder coated,18" rims front and back,brembo brakes front and rear,has accutronix master cylinder,120/90/18 front tire,rear is a 250/40R/18 duel disc brake front and rear.only 129 of them was build and only one has this paint job.digital cluster.you can added back seat and foot peg.if you have any other question you can contact me.the engine is a 113 ss evo.i have had it up to 115mph in 3rd,it has a five speed tran.

A GREAT CHRISTMAS GIFT THIS IS FOR THE MOTORCYCLE ONLY NOT THE TRAILER I Had This MOTORCYCLE Custom Built year 2007 Mesa, AZ ($38,000.00) Did not ride it as much as I thought I would, I'm selling the Chopper Because I am 73 years old I Sold my 1965 Chev Short step side Pickup(I owned the pickup over 45 years) at Barrett-Jackson Auction at Scottsdale,AZ January 2014 (I used it to haul the Bike around) Also Had a Custom Trailer for it. Bike runs GREAT has clear CAIFORNIA Title in my name , CA insured. Bike runs perfect and needs nothing Rev Tech 6 speed Transmission .Open Primary Primo belt drive SOFTAIL Frame.

GREAT LOOKING SOFTAIL BASED CHOPPER .  BIGGER S & S SUPER STOCK ENGINE WITH S& S CARBURETOR AND 5 SPD.. BIKE STARTS AND RUNS GREAT ..  ALL OF THE GEARS WORK BUT DOES NEED BRAKES FIXED.. FRONT ONES DO NOT WORK..  REAR ONES BARELY WORK..

Custom Harley Chopper full of quality parts. Chromed out 80 cubic inch motor 1310 cc. S&S Super Intake.

This 2004 Special Construction West Coast Chopper represents an outstanding example of custom show bike. As noted on the Custom Equipment listed below, this motorcycle has been transformed into a custom high performance Show Bike using the finest components available. With many custom and West Coast Chopper components, the caliber of all work performed on this motorcycle is superb.

WCC 4" up 2" out Powder Coated Black Frame W/Neck Badge and Axle Covers7 Degree Billet Trees6" over Fork Tubes w/Black Powder Coated LegsWCC Oil Tank with battery MountWCC Sporty Gas Tank with Billet Cap and Pingle PetcockWCC Rear Fender with Internal Struts and Frame BungsWCC 8" Handlebar Risers with Six Shooter Jesse James 44 Mag BulletsWCC Six Shooter Jesse James 44 Mag Oil CapWCC Spade Air Cleaner and Choke KnobSpeed Dealer Billet MirrorSpeed Dealer Knurled PegsPerformance Machine Black Billet Hand ControlsPerformance Machine Black Powder Coated 4 Piston CalipersPerformance Machine RotorsSitwell Billet Black ThrottleBlue Anodized Alloy Rims with Black Anodized HubsNew Custom Seat ( Very Comfortable!)100" Revtech Motor with Big Cam and Compression Releases InstalledS&S Super G Carb5 Speed Revtech Transmission with Enclosed Primary3000 Miles New!Clean California Title This Revtech motor was torn down when new and the heads were rebuilt using updated parts and the bigger cam.  The comp valves were installed at that time.   Starts easily.

Dna custom motorcycle  just invested  8 k. Top shelf everything  to much to list.  Call for details.

I purchased this complete BIG BEAR "PRO STREET VENOM " kit in bare metal and then proceeded to upgrade . S&S 124" , Baker 6 Speed , Spyke inverted front end , Colorado digital speed/gauge kit ( not installed , but comes new in pkg w/bike) Spyke hi torqe starter , PM calipers , Arlen Ness rotors , lots of chrome and anodized parts . The bike only has 50 miles at most on it .

2005 Big Bear Chopper, 37,000 mi. 2400 mi. on new 115ci.

Paul Yaffe bars Mean Street front end  PM parts Jim's five speed 60 spoke wheels 150 rear tire  two into one exhaust TP114 motor Open primary to chain  drive California title in hand

2005 hard core chopper, new front tire, full maintenance done less than 1 month ago, 110 revtech engine with 6 spd revtech transmission, show bike low miles. has small chip front fender smaller than nickel.

Titled 2000 SPCN from the 113 S&S Evo. Build completed in 2008 by my Uncle. I've had the bike the last 2 years and now don't have time to ride it anymore.

You are viewing a 1972 custom built Honda 750 chopper featured in February of 1974 Custom Chopper magazine as House of the Rising Sun. Article states it's a 1970 engine, title states it's a 1972, built in 1972-1973 with original CA. blue plates.

i decided to finally sell my one off full custom bad ass drop seat chopper.  THE DOWN AND DIRTY this is #1 of 5 frames built by diamond chassis for billy lane to do the biker build off #1 frame with the 200 rear the rest are 280 the mtr is a custom built rpm 96 with head work that i had dyno @137hp 6 speed trans, chain drive  everything is all top of the line products from black rims to pm . everything is custom painted, power coated, anadized, or chrome the bike rides great and will take it from sam diego to vegas to la with out a worry.. trust it!

This is a Dominator frame, 200 rear tire, leftside drive, Do have MSO,  built from Jesse James,.   This frame  has a Villian tank new unpainted,   RC component rims new : rear is a 18 x 5.5 and the front is a 21 x 3 ,  the triple trees are Pro 1 and made for wide glide 41mm tubes which are new,  The tubes a 41 mm tubes from DRAG spec also new I believe there 6 over.  It has a polished oil tank and all the parts are new except the bars are 10 mini apes off a harley for mock up.  i have a box full of misc parts that go with the bike dont ask what all i have its a box full of parts!!

New Custom Pro Street Soft Tail (  8 year build ) perfection in detail, all custom hand made. Located in Southern California, changed priorities won't allow me to keep the bike.  Aces Choperworks FrameRSD Belt Drive5" stretch in back bone-2" in down tubeLong and Low121 CU TP ( Total Performance ) motor Full PolishAmerican Suspension P7 inverted Front end with integrated front disc brakeProgressive Suspension dual rear shocksPickard Wheels300 mm rear tireMetzeler TiresAll custom handmade Tank, oil bag, fendersPop up style gas tank capAnti Gravity batteryHawg Halter rear disc brakes Primo-Rivera 6 speed TransmissionHi Tech "Omen" 4" belt drivePM Hand ControlsPM Foot ControlsVance & Hines ExhaustInternal electrical and hydraulic lines 

No excuses this bike is ligit. everything is wcc. built in lbc and has no issues.

Beautiful paint job. Painted by Jim Garrard in 2000 for $2800. One scratch on the right tank which did not go through to the color.

Year/Model 2011/ Golgotha Sanctified Engine Make/Size Ultima/ 140CI Drivetrain Baker 6 Torquebox / Evil Engeneering Stretched LSD Frame Make/Type Golgotha / Kustoms Inc / Hardtail Front End Golgotha / Kustoms Inc / Springer 18" over Rake 45 Deg Stretch 6" Wheels Front Xtreme Machine Ripper Bolted/ 21 Inch Wheels Rear Xtreme Machine Ripper Bolted/ 18 inch Tires Front Metzeler 120/70 - 21 Tires Rear Metzeler 300/35 - 18 Brakes Front 360 Brake Brakes Rear HHI Sproter Painter Centerfold Customs/Airbrush Extrodinair Chroming/Plating Dynamic Custom Chrome Additional Info Pipes - Golgotha / Kustoms Inc Zoomies Air cleaner - Golgotha/Wimmer Gas Tank - Golgotha/Vision Oil Tank - Mooneyes Mid Controls - Modified Accutronix Seat - Luna's Upholstery Rear Lights - Detroit Bros Malice LED Front Light - Headwinds/Harley LED Digital speedometer built in mirrors

--- CUSTOM CHOPPER MOTORCYCLE W/ HARLEY DAVIDSON IRONHEAD 1000 ENGINE --- Award winning custom chopper powered by a Harley Davidson Ironhead 1000. A sweet ride that turns heads every time. 1.

Custom Independence softail chopper for sale. Bought it used about 3 years ago and have done a lot of work to it. Took it into a shop when I bought it and had the top end redone about 2,500 miles ago.

2005 hardcore chopper invested over 30k 110 revtech engine with 6 spd revtech transmission. Just had full service done with new front tire less than 20 miles on it. 

2013 Atlas Big Gun 250 Tire, Rigid Chassis, 2013 S&S 111 CI EVO Motor,Primo Belt Drive with Pro Clutch, Chromed  Performance Machine Forward Controls, Baker 5 Speed Right Side Drive Transmission, Spoke Wheels By DNA, Polished Stainless Steel Rotors , Performance Machine Brakes Front and Rear,Barrel Oil Tank, 12" Chubbys Bars,Vance and Hines Pipes,Custom Chrome Hand Controls, Paint and Flames done by Rusty at Twisted Image , 5 Gal Fat Bobs, Custom Seat by Duane Ballard Custom Leather, 4" Springs in Seat for suspension, Wide Glide front end, 21" Wheel, Custom Built by Atlas Precision., $ 32000.00 invested Please if interested  Please  NO SCAMS

Custom chopper with Harley Evolution motor, way too much to list...Low reserve.. way under what I spent just in parts. Over 10k just in parts...

SuperCo built custom chop. This bike has been in Easyrider, Street Chopper and Hot Bike. This bike was a custom build for "Born Free 7" in 2015 by Trevelen Rabanal.

This Flyrite chopper was built by Comance cycles in Simi Valley  everything is new and in excellent working order the S&S engine has very low miles on it.  I have over $13k into this bike  but i need to move on  my loss  is your gain . I guarantee everything works perfect runs great. Bike is located in Malibu Ca.....

Very low miles always garaged ss 96 cubic inch engine great bike, like new new ultra reflective black paint job $30,000 bike, new 280 back tire chromed out this bike is a badass showbike

2006 BIG BEAR CHOPPER DEVILS ADVOCATE, Pristine condition, a lot of chrome, very low miles, a one of a kind motorcycle. New Battery and carburetor has been service and gas tank cleaned. Bid with confidence teh bike is in perfect condition.

Garage kept and only ridden about 15 times. I bought it brand new and have enjoyed playing with it but it's time for it to go. First and foremost it has a few spots that need some love, all are pictured.

2002 Custom Built Chopper NO RESERVE!Easy Riders Magazine Cover Bike!Vin#: 1RD0401PY2CH50467 CLEAN AND CLEAR TITLE!Runs and Rides Great, Normal wear and tear, Ready to Show or Ride! If you can not wait for the end of the auction, BUY IT NOW: $14,900 2002 Special Construction 240 Rigid  This bike was on the Cover and Center Fold Section or Easy Riders Magazine in June 2003 Built By: Scott Hultquist of Riff Raff Customs 1st Place at Oakland Grand National Roadster Show, 1st Place at Oakland Rod and Custom Show 113 Cubic inch 1851 cc S & S Power (Full Polish and Chrome) S & S Chrome Plated / Polished Carb Jim's 6 Speed (Full Polished and Chrome) Jockey / Suicide Shift with Pistol Grip Shiftier Hydraulic Foot Pedal Clutch 240 Rigid Paul Yaffe Frame (40' Rake, 6" Stretch) Primo Open Belt Drive Primary Belt Drive Rear Final Drive Sullivan 10" Over Front End Performance Machine Wheels (21" Front, 8.5 x 18" Rear with 240 Rear Tire Performance Machine Brakes Custom Exhaust System Tested and Inspected, Ready to Show or to Ride Now! This bike was built to show, but can be ridden, No Front Brake, No Turn Signals Normal wear and tear, some pitting / peeling on chrome, all minor, minor ding in front and tank (no paint damage, hard to see) This is a Beautiful Professionally built show bike!

We are auctioning off a one of a kind 2005 Black Swamp Custom Chopper This was the Cover Bike of Biker Magazine co-sponsored by Penthouse, Featuring Penthouse pet Martina Warren. This bike has won numerous awards and will continue to do so.   It features a custom rear fender by Billy Z Custom Paint by Rob Barrera of Ohio.

  MALIBU MOTORCYCLE WORKS   818-300-4299  . CALL US , OR E-MAIL US ANYTIME ALL OF OUR FRAMES COME WITH 17 DIGIT VIN NUMBERS STAMPED IN THE FRAMES AND A  MSO'S (MANUFACTURE STATEMENT OF ORIGIN) THAT ARE FEDERALLY APPROVED     WE SHIP WORLDWIDE AND TAKE CARE OF ALL THE EXPORT DOCUMENTATION WE STOCK 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 ADDITIONAL FRAMES TO BUILD ROLLING CHASSIS THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU WE STOCK OVER OVER 10,000 PARTS IN OUR WAREHOUSE WITH A WIDE VARIETY OF PARTS FOR A ROLLING CHASSIS OR ANY BIKE PROJECT YOU ARE WORKING ON ,THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU     PLEASE READ: TAKE A GOOD LOOK AT THE PRODUCT WE ARE SELLING . IF YOU ARE ON E-BAY LOOKING AT OTHER AUCTIONS , YOU WILL SEE THAT WE SELL SOME OF THE BEST ROLLING CHASSIS AND KIT BIKES IN THE WORLD .

THIS TRIKE STARTED OUT LIFE AS A 2006 AMERICAN IRONHORSE TEXAS CHOPPER IT HAS A S&S 111 WITH A BAKER 6 SPEED WITH WILWOOD BRAKES, VANCE AND HINES EXHAUST. IT WAS TRANSFORMED INTO A TRIKE BY MYSTERY DESIGNS IN TEXAS IN 2010 . THE TOP TRIKE BUILDERS IN THE COUNTRY.

2012 Pro-one special construction soft tail chopper. Matt Hotch design, 100 Cubic Inch Ultima motor, 6 spd Ultima transmission, $10k torch smoke paint job, open primary, all cables hidden, reservoirs are in bars, 650 miles. Has been stored and hardly ridden for two years.

ear fender, gas tank, custom seat, custom pipes, pm brakes, forward controls, drive belt, new tires, custom rims, transmission plate, motor mount, ignition box. Needs paint, motor, transmission is set up for EVO style motor.  I have paperwork for the frame Contact Allen for more info or pics (714) 401-8362

For sale or possible trade is an extremely gorgeous 2014 Custom built bike. This bike sports a 120 inch S&S motor, 6 speed baker transmission. This is an incredible bike to ride, lot of fun, lot of looks Strobe lights on frame and motor. This bike is very quick and is a real headturner.Please email or call Mike at 530-712-7212 530-538-9686

Today I have a gem for you, I have for sale my personal Custom Big Bear Chopper, One of a kind, Not a regular Bike you can grab of their website. Showroom Condition, Has barely been driven parked in my garage since 2008.  Milage under 3,500 miles. rides smooth,  call for more information.  Do not call if you are not serious.

2000 Daytec. 88 C.I. S&S, Super G carb.

The bike you are looking at is a 2005 Mike Powers custom American chopper. This was built as one of Mike Powers "Lady Tamer" line of custom bikes in Burbank California. Many of which were award winning.

2000 Special Construction Rigid Chopper. Rebuilt completely in 2014. Custom 70's build inspired by Dennis Hopper's "Billy Bike " in the  Movie Easy Rider.

2011   FULL CUSTOM SLED  ICI LOWLIFE , REGISTERED AS WAR EAGLE MOTORCYCLE ( NOT SPECIAL CONSTRUCTED)   200 ORIGINAL MILES . 100 HOURS OF METAL WORK AND BODY . FULL BODY MOLDED , ALL HAND MADE SHEET METAL,  PM WHEELS , MEAN STREET FORKS, HAND MADE ONE OFF TRUE DUAL STAINLESS EXHAUST , SPECIAL FRONT AND SIDE SCREEN MADE  , POWDER COATED 127 ENGINE, BAKER TRANNY , PRIMO BELT DRIVE .

2000 special construction softtail satin black paint, pm brakes, mikuni carb, new avon tires, new brake pads and rotors, hooker exhaust, dakota digital speedo, 100 inch motor, bike looks and runs great !!

2002 custom soft tail Amen chassis rogersville Tennessee 2 inch tube, 250 tire. Merch performance 100 c.i. Engine 4speed tranny .55 degree rake long low sleek bike new bike never registered thunder header  ex clutch headwinds headlamp fat cats sheet metal.

  MALIBU MOTORCYCLE WORKS   818-300-4299  . CALL US , OR E-MAIL US ANYTIME ALL OF OUR FRAMES COME WITH 17 DIGIT VIN NUMBERS STAMPED IN THE FRAMES AND A  MSO'S (MANUFACTURE STATEMENT OF ORIGIN) THAT ARE FEDERALLY APPROVED     WE SHIP WORLDWIDE AND TAKE CARE OF ALL THE EXPORT DOCUMENTATION WE STOCK 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 ADDITIONAL FRAMES TO BUILD ROLLING CHASSIS THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU WE STOCK OVER OVER 10,000 PARTS IN OUR WAREHOUSE WITH A WIDE VARIETY OF PARTS FOR A ROLLING CHASSIS OR ANY BIKE PROJECT YOU ARE WORKING ON ,THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU     PLEASE READ: TAKE A GOOD LOOK AT THE PRODUCT WE ARE SELLING . IF YOU ARE ON E-BAY LOOKING AT OTHER AUCTIONS , YOU WILL SEE THAT WE SELL SOME OF THE BEST ROLLING CHASSIS AND KIT BIKES IN THE WORLD .

  MY NAME IS ALEX ENGLISH AND I AM THE OWNER OF OLD E METALWORKS IN SACRAMENTO CALIFORNIA. I HAVE BEEN  WORKING AND BUILDING CUSTOM BIKES IN THE MOTORCYCLE INDUSTRY FOR THE PAST 15 YEARS MANY OF WHICH HAVE BEEN FEATURED IN MAGAZINES AND HAVE GAINED MANY AWARDS. THE BIKE I HAVE UP FOR SALE RIGHT HERE IS IN MY BOOK A PERFECT EXAMPLE OF THAT.   THIS LITTLE GEM STARTED ITS LIFE AS A 1995 883 SPORTSTER I BOUGHT IN 2010.

***Simms custom Harley – Stunning Show bike just finished***   If you know Ron Simms Bay Area Customs then I guess you know the legend who brought the Harley Softail models to life.   Just finished this cherry red 131 Cubic Inch Thug motor with massive horsepower, 6 speed baker transmission, Legend air ride control with automatic lowering suspension, brand new show paint job by Horst. PM 18” wheels with brand new tires, PM brake calipers, hand controls, forward controls.

SS Evolution V. One of a kind. Twin 117 Cubic Inches: 1916 CC.

Custom Chopper built chopper by Harley shop called  Binford's Custom Cycles in California. Bike has only a couple hundred miles on it. Custom flames painted in house, Binford's knuckle wheels, 26" front, 110" RevTech engine, open primary belt drive, one of a kind, one off, all professionally built by motorcycle shop that has been in business for over 20 years.

Custom Built Chopper - The "Brass Monkey" - This Custom Built Chopper is a one of a kind built in Hollywood by Thunder Road Classic Motorcycles.  It is a fresh build off a 2011 SPCN including all the following brand new parts: Custom Made Black Powder Coated Wheels, Performance Machine Forward Controls, PM Brake Calipers Front and Rear, PM Brake & Clutch Levers, Handlebars, Solid Brass Risers, Brass Velocity Stack, Solid Brass Heat Shields, Solid Brass Seat Springs, Custom Handmade Exhaust Pipes, Custom Handmade Solid Brass Footpegs and Shifter & Brake Pegs, Original Solid Brass Indian Larry Pushrod Cover Clips, Goldtone Chain, Custom Made Paughco Black and Brass Front End, Hand-Made Leather Seat by Vidal, Metzler Tires, Custom Hand-Made Black Powdercoated Sissy Bar, Black & Brass Headlight, Pingle Solid Brass Petcock, Solid Brass Point Cover, PM Transmission Cover, New Sprocket and Brake Rotors.. other parts include: H-D 1340 Evo Engine w/ Andrews EV27 Cam, S&S Transmission, S&S Carb, BDL 3" Open Primary, Mooneyes Oil Pressure Gauge, Custom Paint Job by world renowned painter - Skratch

Ultimate Dodger fan custom bike. Paint by Danny D , built with all quality parts. S&S EVO, 6 speed , Primo RSD , JB Controls , WCC etc.

2010 West Coast Choppers El Diablo the king of choppers.The last west coast EL Diablo to be built in the Long Beach shop.No expense spared This bike is in Mint Cond with under a 100 miles on it. looks brand new The bike has all of the best WEST COAST CHOPPERS features  Brembo brakes 124 s&s polished engine Chrome single porthole downtube frame F U PIPES BULLET RISERS, GAS CAP & OIL CAP. HOT DOG PAINT that is over the top.

2007 WCC 4 up Rare Softail Dragon probably under 10 of these ever built. This is by far the best WEST COAST i ever rode. 124' S&S POLISHED ENGINE HOT DOG PAINT All the WEST COAST OPTIONS Bullet RISER,BREMBO CONTROLS, WEST COAST RIMS,GRIPS,HANDLEBARS.

2007 Custom Chopper 110" RevTech motor and 6 speed RevTech transmission with less than 3000 miles on the whole bike, barely ridden. I converted the bike to a suicide shift setup (Foot Clutch) which makes it a blast to ride! Internal throttle so the bars look clean and clutter free. The bike is in great shape and runs and rides great.

Zacky's Wide Tire Custom Chopper / Pro Street Winner of 2 bike shows! Built in 2007 by Zacky's Custom Rods, award winning custom bike builder. This was custom 100% custom built from the frame up.

The ONLY Fitto painted Arlen Ness custom in the world. Fitto is arguably the most famous/best motorcycle artist in the world, today. You can buy chrome, but you CANNOT get art like this!

2008 Big Bear Chopper Venom Model S&S 111 Engine 5" BDL Open Primary 6 Speed Transmission Ridiculous Springer Front End PM (Performance Machine) Wheels (Front 120 Straight Spoke, Rear 160 Straight Spoke) These cost $10,000 when they where new. PM (Performance Machine) Brakes Internal Throttle Custom Leather Seat Black and Gold Custom Paint w/ Metal Flake (This paint job is really nice) This bike was originally built for the owner of Big Belly Crew clothing company. The bike just had a full service, Carb cleaned and a new Michelin Commander front tire 2 weeks ago.